How to start linuxcnc from terminal

More
1 year 3 months ago #331954 by johns00056
How to start linuxcnc from terminal was created by johns00056
Linuxcnc fails at startup and just sits there.

My machine does not show the error logs unless I start from terminal.

My machine has been working flawlessly for a number of years and it seems that I have forgotten how to start  it from the terminal.

2.7 debian stretch.

Please Log in to join the conversation.

More
1 year 3 months ago #331958 by PCW
Replied by PCW on topic How to start linuxcnc from terminal
Simply typing:

linuxcnc

at a terminal window should do.

Please Log in to join the conversation.

More
1 year 3 months ago #331963 by johns00056
Replied by johns00056 on topic How to start linuxcnc from terminal
Thanks. That was easy enough!

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum