Hardware requirement if a MESA 7i97T card is used

Hi members,

I got the recommendation from a member to use t< for my retrofit project he MESA 7i97T card.

Would I need another type of MESA as a "motherboard" - or would the hardware list be as simple as listed below:

1x PC with LinuxCNC installed
1x Ethernet cable
1x 5 V DC power supply
1x MESA 7i97T

Thanks a lot and best regards

Hartwig
 

Hartwig wrote:

1x PC with LinuxCNC installed
1x Ethernet cable
1x 5 V DC power supply
1x MESA 7i97T

 

That is all you need.
But, it would be advisable to give us more info about the machine/drives/motors, as 7i97T will work with analog servo drives.
If you are sure they are analog, go for it.