SOLVED - VNC Server problem on Raspberry Pi 5 4GB - LinuxCNC official image

I downloaded the official image from here; www.linuxcnc.org/iso/rpi-5-debian-bookwo...25-01-27-0140.img.xz
Everything is ok, linuxcnc and ethercat master is working, 

I am trying to connect via VNC from remote, when I connected to 192.168.1.122:1 via VNC's password, its connecting but there is only blank gray screen,
I installed tightvncserver also, its same,
What should I do?

Best bet is to google for the various internet resources for setting up vnc.
You may have some luck searching the forums, but it wasn't a package I thought needed, still don't, for running a CNC machine. I'm not a fan of running a CNC setup remotely.
If you just need to run an editor or even Linuxcnc remotely it can be via SSH.

If you try to connect remotely via VNC after logging in with your username from the console, you'll get a gray screen. You'll need to log out from console.