Issue with G38.5

More
10 months 4 weeks ago #339575 by abs32
Replied by abs32 on topic Issue with G38.5
Verified - adding the code M66 P0 L0 around all G38 did not eliminate the error. 2.9.7

Please Log in to join the conversation.

More
7 months 4 days ago #344767 by abs32
Replied by abs32 on topic Issue with G38.5
As a result,  www.forum.linuxcnc.org/38-general-linuxc...lock?start=30#344768

Please Log in to join the conversation.

More
6 months 3 days ago #345978 by grandixximo
Replied by grandixximo on topic Issue with G38.5
@christer
github.com/LinuxCNC/linuxcnc/pull/3971
could you test this?
---
test signature

Please Log in to join the conversation.

Time to create page: 0.056 seconds
Powered by Kunena Forum