PyVCP

8 months 1 week ago #343389 by Marco61

PyVCP was created by Marco61

Hi This is a linuxcnc report after changing codes in custom panel files.Can someone help me ?

Please Log in to join the conversation.

8 months 1 week ago #343392 by roland

Replied by roland on topic PyVCP

In your XML file, you have opened the root tag

Code:

<pyvcp>

twice.

Please Log in to join the conversation.

8 months 1 week ago #343393 by Marco61

Replied by Marco61 on topic PyVCP

Thanks a lot !
It's working fine but the jog speed is vert low.
Jog slider @max
Can you tell me where to change this value ?
Thanks
Marco

Please Log in to join the conversation.

Time to create page: 0.256 seconds