update running in place linuxcnc

papagno-source
Topic Author
Offline
Elite Member

7 months 3 weeks ago #344011 by papagno-source

update running in place linuxcnc was created by papagno-source

Good morning. I compiled LinuxCNC master version 2.10.0 running in place, downloading it from Git, about a month ago. How can I update the source code to the current version and then recompile it with the latest bug fixes?

Thanks

Please Log in to join the conversation.

rodw
Offline
Platinum Member

7 months 3 weeks ago #344012 by rodw

Replied by rodw on topic update running in place linuxcnc

git pull
make
sudo make setuid

That's it so simple!

Please Log in to join the conversation.

papagno-source
Topic Author
Offline
Elite Member

7 months 3 weeks ago #344013 by papagno-source

Replied by papagno-source on topic update running in place linuxcnc

Hi Thank for reply.
The git pull command start with terminal in SRC directory on base directoiry ?

Thanks

Please Log in to join the conversation.

rodw
Offline
Platinum Member

7 months 3 weeks ago #344017 by rodw

Replied by rodw on topic update running in place linuxcnc

its so automatic I can't remember source dir I think.

Please Log in to join the conversation.

Time to create page: 0.157 seconds