Cannot select 5i23 Mesa card in PnCConf

on the first page mesa _is_ selected - mesa0 pci/parport card

On the second page is there no other option sunder board name?

Chris M

In the first page, the mesa card (5i23) is not visible in "on the first page mesa _is_ selected - mesa0 pci/parport card"
Is this normal ? I see in configuration of other people that, the card appears...

In the second page, i have other option (5i25,7i43, 5i22 and 5i23 .... 3x20 ....)
Is that enough to have only these informations on this page ? or must i have the selection of 5i23 in the first page at the line "on the first page mesa _is_ selected - mesa0 pci/parport card" ?

Those were older versions of pncconf.
Select the card on the mesa page.

Chris M

ahh Ok, thank you very much for all the time you spent to answer to my questions.
I will continued to make my configuration.
May be I probably would have other questions to ask

thank you very much

Laurent.