odd error message popping up for missing GST file?

More
8 years 5 months ago #110650 by Lcvette
Replied by Lcvette on topic odd error message popping up for missing GST file?
nope axis goes straight to debug report,. I think there are too many things tied to the gmoccapy screen design he did, i see alot of calls for it in the ini file. :/

Please Log in to join the conversation.

More
8 years 5 months ago #110651 by Lcvette
Replied by Lcvette on topic odd error message popping up for missing GST file?
in ini file..
Code:
# Generated by PNCconf at Thu Nov 9 12:55:45 2017 # If you make changes to this file, they will be # overwritten when you run PNCconf again [EMC] MACHINE = VMC2 DEBUG = 0 [DISPLAY] DISPLAY = gmoccapy EMBED_TAB_NAME =Probe Screen EMBED_TAB_LOCATION = ntb_user_tabs EMBED_TAB_COMMAND = halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u python/probe_screen.py -x {XID} probe_icons/probe_screen.glade PREFERENCE_FILE_PATH = gmoccapy_preferences POSITION_OFFSET = RELATIVE POSITION_FEEDBACK = ACTUAL MAX_FEED_OVERRIDE = 3.000000 MAX_SPINDLE_OVERRIDE = 1.250000 MIN_SPINDLE_OVERRIDE = 0.500000 INTRO_GRAPHIC = linuxcnc.gif INTRO_TIME = 5 PROGRAM_PREFIX = /home/chris/linuxcnc/nc_files PYVCP = pyvcp-panel.xml INCREMENTS = .1mm .05mm .01mm .005mm POSITION_FEEDBACK = ACTUAL DEFAULT_VELOCITY = 150.000000 MAX_LINEAR_VELOCITY = 280 MIN_LINEAR_VELOCITY = 0.500000 DEFAULT_ANGULAR_VELOCITY = 12.000000 MAX_ANGULAR_VELOCITY = 650.000000 MIN_ANGULAR_VELOCITY = 1.666667 EDITOR = gedit GEOMETRY = xyz [FILTER] PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image PROGRAM_EXTENSION = .py Python Script png = image-to-gcode gif = image-to-gcode jpg = image-to-gcode py = python [TASK] TASK = milltask CYCLE_TIME = 0.010 [RS274NGC] #BELOW IS THE STARTUP CODE FOR THE MACHINE, WILL BE IN THIS STATE AT STARTUP RS274NGC_STARTUP_CODE = g17 g21 g40 g43h0 g54 g64 P 0.01 G80 G90 G94 G97 M5 M9 PARAMETER_FILE = linuxcnc.var FEATURES=30 SUBROUTINE_PATH = macros #BELOW ARE MY REMAPPED M CODES FOR TOOLCHANGES REMAP=M6 modalgroup=6 prolog=change_prolog ngc=toolchange epilog=change_epilog REMAP=M10 modalgroup=6 argspec=p ngc=m10 REMAP=M11 modalgroup=6 argspec=p ngc=m11 REMAP=M12 modalgroup=6 argspec=p ngc=m12 REMAP=M13 modalgroup=6 ngc=m13 REMAP=M21 modalgroup=6 ngc=m21 REMAP=M22 modalgroup=6 ngc=m22 REMAP=M23 modalgroup=6 ngc=m23 REMAP=M24 modalgroup=6 ngc=m24 REMAP=M25 modalgroup=6 ngc=m25 REMAP=M26 modalgroup=6 ngc=m26 [TOOLSENSOR] # Control probe rapid speed RAPID_SPEED = 600 [TOOLSETTER] X = 10 Y = 10 Z = -20 # abort change if no toolsensor contact after this probe distance MAXPROBE = -20 # this is not named TOOL_CHANGE_POSITION on purpose - canon uses it and will # interfere [CHANGE_POSITION] X = 10 Y = 10 Z = -2 [EMCMOT] EMCMOT = motmod COMM_TIMEOUT = 1.0 COMM_WAIT = 0.010 SERVO_PERIOD = 1000000 [HOSTMOT2] # **** This is for info only **** # DRIVER0=hm2_eth # BOARD0=7i92 [HAL] HALUI = halui HALFILE = VMC2.hal HALFILE = custom.hal #HALFILE = vc-p1as.hal POSTGUI_HALFILE = postgui_call_list.hal #POSTGUI_HALFILE = vc-p1as-postgui.hal POSTGUI_HALFILE = custom_postgui.hal HALUI = halui #SHUTDOWN = shutdown.hal [HALUI] MDI_COMMAND=... MDI_COMMAND=... MDI_COMMAND=... MDI_COMMAND=... MDI_COMMAND=... MDI_COMMAND=G10 L20 P1 X0 MDI_COMMAND=G10 L20 P1 Y0 MDI_COMMAND=G10 L20 P1 Z0 MDI_COMMAND=G0 X0 Y0 Z0 MDI_COMMAND=G10 L20 P1 A0 [PYTHON] PATH_APPEND = /home/chris/linuxcnc/configs/VMC2/python TOPLEVEL = /home/chris/linuxcnc/configs/VMC2/python/toplevel.py LOG_LEVEL = 8 [TRAJ] AXES = 4 COORDINATES = X Y Z A MAX_ANGULAR_VELOCITY = 360.00 DEFAULT_ANGULAR_VELOCITY = 36.00 LINEAR_UNITS = mm ANGULAR_UNITS = degree CYCLE_TIME = 0.010 DEFAULT_LINEAR_VELOCITY = 50 MAX_VELOCITY = 283.33 [EMCIO] EMCIO = io CYCLE_TIME = 0.100 TOOL_TABLE = tool.tbl TOOL_CHANGE_QUILL_UP = 0 #******************** # Axis X #******************** [AXIS_0] TYPE = LINEAR HOME = 0.0 FERROR = 0.1 MIN_FERROR = 0.01 MAX_VELOCITY = 280 MAX_ACCELERATION = 2000.0 # The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION # If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger. STEPGEN_MAXVEL = 350 STEPGEN_MAXACCEL = 4000 P = 3000 I = 0 D = 0 FF0 = 0 FF1 = 1 FF2 = 0 BIAS = 0 DEADBAND = 0 MAX_OUTPUT = 0 ENCODER_SCALE = -2000.17 # these are in nanoseconds DIRSETUP = 3000 DIRHOLD = 6000 STEPLEN = 1000 STEPSPACE = 1000 STEP_SCALE = -600.05 MIN_LIMIT = -360.0 MAX_LIMIT = 335.0 HOME_OFFSET = 300.00 HOME_SEARCH_VEL = 75 HOME_LATCH_VEL = 15 HOME_FINAL_VEL = 150.000000 HOME_USE_INDEX = no HOME_SEQUENCE = 1 #******************** # Axis Y #******************** [AXIS_1] TYPE = LINEAR HOME = 0.0 FERROR = 0.10 MIN_FERROR = 0.01 MAX_VELOCITY = 280 MAX_ACCELERATION = 2000.0 # The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION # If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger. STEPGEN_MAXVEL = 350 STEPGEN_MAXACCEL = 4000 P = 2700 I = 0 D = 0 FF0 = 0 FF1 = 1 FF2 = 0 BIAS = 0 DEADBAND = 0 MAX_OUTPUT = 0 ENCODER_SCALE = -2000.17 # these are in nanoseconds DIRSETUP = 3000 DIRHOLD = 6000 STEPLEN = 1000 STEPSPACE = 1000 STEP_SCALE = -600.05 MIN_LIMIT = -345.0 MAX_LIMIT = 35.0 HOME_OFFSET = 1.000 HOME_SEARCH_VEL = 75 HOME_LATCH_VEL = 15 HOME_FINAL_VEL = 150.000000 HOME_USE_INDEX = no HOME_SEQUENCE = 1 #******************** # Axis Z #******************** [AXIS_2] TYPE = LINEAR HOME = 0.0 FERROR = 0.1 MIN_FERROR = 0.01 MAX_VELOCITY = 265 MAX_ACCELERATION = 1800.0 # The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION # If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger. STEPGEN_MAXVEL = 350 STEPGEN_MAXACCEL = 3600 P = 2500 I = 0 D = 0 FF0 = 0 FF1 = 1 FF2 = 0 BIAS = 0 DEADBAND = 0 MAX_OUTPUT = 0 ENCODER_SCALE = 2000.17 # these are in nanoseconds DIRSETUP = 3000 DIRHOLD = 6000 STEPLEN = 1000 STEPSPACE = 1000 STEP_SCALE = 600.05 MIN_LIMIT = -400.0 MAX_LIMIT = 20.0 HOME_OFFSET = -2.000 HOME_SEARCH_VEL = 75 HOME_LATCH_VEL = 15 HOME_FINAL_VEL = 25.000000 HOME_USE_INDEX = no HOME_SEQUENCE = 0 #******************** # Axis A #******************** [AXIS_3] TYPE = ANGULAR HOME = 0.0 FERROR = 2.0 MIN_FERROR = 0.750 MAX_VELOCITY = 650.0 MAX_ACCELERATION = 3000.0 # The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION # If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger. STEPGEN_MAXVEL = 840 STEPGEN_MAXACCEL = 6000 P = 6000 I = 0 D = 0 FF0 = 0 FF1 = 1 FF2 = 0 BIAS = 0 DEADBAND = 0 MAX_OUTPUT = 0 ENCODER_SCALE = 2000 # these are in nanoseconds DIRSETUP = 3000 DIRHOLD = 6000 STEPLEN = 1000 STEPSPACE = 1000 STEP_SCALE = -183.335 MIN_LIMIT = -9999.0 MAX_LIMIT = 9999.0 HOME_OFFSET = 0.0 HOME_SEQUENCE = 2 #******************** # Spindle #******************** [SPINDLE_9] P = 0.0 I = 0.0 D = 0.0 FF0 = 1.0 FF1 = 0.0 FF2 = 0.0 BIAS = 0.0 DEADBAND = 0.0 MAX_OUTPUT = 6225 ENCODER_SCALE = -4110.0 OUTPUT_SCALE = 6225 OUTPUT_MIN_LIMIT = 0 OUTPUT_MAX_LIMIT = 6225

Please Log in to join the conversation.

More
8 years 5 months ago #110652 by cmorley
Replied by cmorley on topic odd error message popping up for missing GST file?
please try a sim config.

Chris M

Please Log in to join the conversation.

More
8 years 5 months ago #110654 by Lcvette
Replied by Lcvette on topic odd error message popping up for missing GST file?

cmorley wrote: please try a sim config.

Chris M


Chris,

i loaded Gmoccapy from the sim config menu and it loaded right up no problem, numbers popped up and everything seems to look like it was working no worries.. hmphh :unsure:

Please Log in to join the conversation.

More
8 years 5 months ago #110697 by cmorley
Replied by cmorley on topic odd error message popping up for missing GST file?
Ok great at least linuxcnc isn't completely broken - that then indicates a configuration problem.

I see from you posted ini file that it has remap, MDI commands ,VCp and gladevcp etc commands.
Pncconf does not have remap options so this is modified by hand I assume.

my suggestion is to make a basic config with pncconf.
By basic I mean only use options that will setup the axes.

See if that works if so go back and add the other options you want that pnccond can help you with.
if that still works that start adding hand written option into the last working config - you can use your current broken config as a reference.
In this way you should be able to find out what the problem is.

Chris M

Please Log in to join the conversation.

More
8 years 5 months ago #110859 by Lcvette
Replied by Lcvette on topic odd error message popping up for missing GST file?

cmorley wrote: Ok great at least linuxcnc isn't completely broken - that then indicates a configuration problem.

I see from you posted ini file that it has remap, MDI commands ,VCp and gladevcp etc commands.
Pncconf does not have remap options so this is modified by hand I assume.

my suggestion is to make a basic config with pncconf.
By basic I mean only use options that will setup the axes.

See if that works if so go back and add the other options you want that pnccond can help you with.
if that still works that start adding hand written option into the last working config - you can use your current broken config as a reference.
In this way you should be able to find out what the problem is.

Chris M


ok i had to install some new hardware components due to a latency issue but that is now resolved... so i started tinkering and i tried loading all of the sims and started getting error messages for some of them the same as with the config from my buddy, missing ngc files. I am guessing these sims should not be missing files as they should be inside the installed software. so this leads me to believe again that the issue is a compatibility problem. in fact i tried to open the sim and was unable to until i replaced the player.py file you attached previously. once i did that gmoccapy opened in the sims. i have not yet even brought in any of the files from my previous installation to this new system yet. it is just a clean installation of the debian stretch preempt rt. I am not certain if I am supposed to install additional software maybe? or where to get it from? the updates are saying everything is up to date. so im flying a bit blind at the moment.

here is a snap shot of one of the sims and its missing files errors similar to error messages i was getting with my buddies config files, missing ngc files.

thoughts?

Chris

Attachment not found

Please Log in to join the conversation.

More
8 years 5 months ago #110862 by cmorley
Replied by cmorley on topic odd error message popping up for missing GST file?
check in YOUR_HOME/linuxcnc/nc_files for a broken link.
(YOUR_HOME will be of course specific to your computer)

In theory that file gmoccapy references in the error code should be in that folder
or at least linked to that folder.

The player.py is a known problem and was expected.
Chris M

Please Log in to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum