Mesa 7i96 and LinuxCNC 2.8 PnCConf

6 years 1 month ago #180232 by PCW

Replied by PCW on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf

I would suggest connecting V- to frame ground

Please Log in to join the conversation.

6 years 1 month ago #180234 by Aldenflorio

Replied by Aldenflorio on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf

What doe you mean frame ground? (I’m not too familiar with electronics

Please Log in to join the conversation.

6 years 1 month ago #180239 by PCW

Replied by PCW on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf

Earth ground (same as the shield)

Please Log in to join the conversation.

6 years 1 month ago #180240 by Aldenflorio

Replied by Aldenflorio on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf

Ok, so run a wire from V- to ground? I don’t think I’ve heard that before

Please Log in to join the conversation.

Time to create page: 0.108 seconds