7i92 pncconf

More
7 years 8 months ago #126917 by pl7i92
7i92 pncconf was created by pl7i92
Will there be a posible pncconf version that can handle the
Bitfiles in Directory or even coustm bitfiles as on readback from the board

Please Log in to join the conversation.

More
7 years 8 months ago #126919 by PCW
Replied by PCW on topic 7i92 pncconf
There's a experimental mode that reads the current IDROM from the bitfile
but I think it needs work...

Please Log in to join the conversation.

More
7 years 8 months ago #126931 by pl7i92
Replied by pl7i92 on topic 7i92 pncconf
thanks is this from BigJohn github

Please Log in to join the conversation.

More
7 years 8 months ago #126937 by PCW
Replied by PCW on topic 7i92 pncconf
No its in pncconf, wriiten by Chris Morely
The "Discovery Option" may only be in master

Please Log in to join the conversation.

More
7 years 8 months ago #126970 by cmorley
Replied by cmorley on topic 7i92 pncconf
Master and must check the 'Show advanced option pages' The you will see it on the Mesa configuration page/tab

As Peter mentions it's clunky and brittle.

Chris M

Please Log in to join the conversation.

More
7 years 7 months ago #129484 by pl7i92
Replied by pl7i92 on topic 7i92 pncconf
so handmade configs are still the best option

Please Log in to join the conversation.

More
7 years 7 months ago #129486 by PCW
Replied by PCW on topic 7i92 pncconf
You can use pncconf 5i25 configurations for the 7I92 by just globally replacing the card name and replacing the driver load line, you don't really need to start completely from scratch.

Please Log in to join the conversation.

More
7 years 7 months ago #129502 by tommylight
Replied by tommylight on topic 7i92 pncconf
Search and replace (ctrl+H) can make that a breeze !

Please Log in to join the conversation.

More
7 years 7 months ago #129659 by pl7i92
Replied by pl7i92 on topic 7i92 pncconf
woudent it be a great Releve to setup a Catagory here ,MAYBE 2nd state under configs
FOR Mesacards Basic
and make a post to start Sticky

Please Log in to join the conversation.

Time to create page: 0.193 seconds
Powered by Kunena Forum