7i76 Step0 and Step1 vs X or Z axis (lathe)

More
6 years 9 months ago #153933 by mooser
7i76 Step0 and Step1 vs X or Z axis (lathe) was created by mooser
Can't get to the LinuxCNC computer right now to check
Does it matter which set (Step0 (pins 1-6) or Step1 (pins 7-12) is the X or Z axis?
I'm wiring the control board and just want to make sure

Thanks
M

Please Log in to join the conversation.

More
6 years 9 months ago #153934 by cmorley
Replied by cmorley on topic 7i76 Step0 and Step1 vs X or Z axis (lathe)
Ether can be ether axis.

Chris

Please Log in to join the conversation.

More
6 years 9 months ago #153935 by mooser
Replied by mooser on topic 7i76 Step0 and Step1 vs X or Z axis (lathe)
Thank you
Just trying to keep the wiring neat :)
M

Please Log in to join the conversation.

Time to create page: 0.158 seconds
Powered by Kunena Forum