LinuxCNC 2.9.0 configuration problem

More
6 years 7 months ago #160519 by cmorley
Replied by cmorley on topic LinuxCNC 2.9.0 configuration problem
Seems to indicate there is a problem with language translations.
What language is your computer set for?

Chris

Please Log in to join the conversation.

More
6 years 7 months ago #160538 by Hamada
Replied by Hamada on topic LinuxCNC 2.9.0 configuration problem
I'm using English

Attachment not found

Please Log in to join the conversation.

More
6 years 7 months ago #160887 by Arro
Replied by Arro on topic LinuxCNC 2.9.0 configuration problem
Seems to be a python issue, as if some settings of python are not accepted

I'm not python expert, but I suggest to check your python 2.7 installation

Please Log in to join the conversation.

More
6 years 7 months ago #161317 by Hamada
Replied by Hamada on topic LinuxCNC 2.9.0 configuration problem
It is working now, I ignored encoder setup on previous page so problem happen on scale calculation on next page

Please Log in to join the conversation.

Time to create page: 0.040 seconds
Powered by Kunena Forum