Mesa connection issue

Here are the files

Try this:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 10.10.10.100
netmask 255.255.255.0

It's still giving the unreachable error

looks like there's still an error in your interfaces file

What's in it now?

It looks like it somehow changed.

Maybe you forgot to edit it as root (with sudo)
(since that's your previous file edit)

Ok, the /etc/network/interfaces.d/setup is edited as you instructed. But, I mistakenly edited the /etc/network/interfaces file. What should that file look like?
Still get the unreachable error.

I dont think the setup file should be changed, its the interfaces file that should be changed

Here is my interfaces file:

# interfaces(5) file used by ifup( and ifdown(
auto lo
iface lo inet loopback

auto eno1
iface eno1 inet static
address 10.10.10.100
hardware-irq-coalesce-rx-usecs 0


Note that your Ethenet device name is eth0 not eno1 and you probably don't need the coalesce settings
so you should have something like:

# interfaces(5) file used by ifup( and ifdown(
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 10.10.10.100

PCW wrote:
# interfaces(5) file used by ifup( and ifdown(
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 10.10.10.100

I have the same thing in the interface file. But,
netmask 255.255.255.0
at the bottom.

What should my setup file be?

On my system, the interfaces.d/ directory is empty

Can you copy your interfaces file here again? It may have a typo
Also note that the interfaces file only gets read when the link goes up or down