pncconf swaps the invert function for step and direction

6 years 3 weeks ago #185124 by PCW

pncconf swaps the invert function for step and direction was created by PCW

If you select invert direction, pncconf inverts the step signal and vice versa

Please Log in to join the conversation.

6 years 3 weeks ago #185140 by cmorley

Replied by cmorley on topic pncconf swaps the invert function for step and direction

thanks for the report. what version of linuxcnc?

Please Log in to join the conversation.

6 years 3 weeks ago #185142 by PCW

Replied by PCW on topic pncconf swaps the invert function for step and direction

I checked 2.9. but I think 2.8 is the same

Please Log in to join the conversation.

6 years 3 weeks ago #185330 by cmorley

Replied by cmorley on topic pncconf swaps the invert function for step and direction

ok I pushed a fix in 2.8 and master.
Seems to work for me now.

Thanks Peter.

Please Log in to join the conversation.

6 years 3 weeks ago #185337 by PCW

Replied by PCW on topic pncconf swaps the invert function for step and direction

Thanks!

Please Log in to join the conversation.

Time to create page: 0.076 seconds