PnCConf with RPI 4 and Mesa 7C81

Mehta_123 wrote:

how to hand edit input output (GPIO) in hal and ini? 
please give me one example.
Thanks!!!!!
 

I am not sure if I undestand your question correct; but:
The *.hal and *.ini-files are plain text-files. you can edit them using any editor (notepad++ for instance).
I attached an excample for a *.hal- and *.ini-file. These excamples are for a RaspberryPi5 using only the GPIO-Port (useing the "Generic driver for any GPIO supported by gpiod" described here: linuxcnc.org/docs/stable/html/drivers/hal_gpio.html )

I hope this is helpfull.

Word of caution, never use Office suits to edit machine files, use only text editors like Marvin mentioned, or GEdit, XED, mousepad, geany, nano, etc