[SOLVED] Bug: PnCConf does not set up servo spindle PID feedback correctly.

5 years 9 months ago #196445 by PCW

Replied by PCW on topic [SOLVED] Bug: PnCConf does not set up servo spindle PID feedback correctly.

Code:

net spindle-vel-fb-rpm-abs    => pid.s.feedback

should be

Code:

net spindle-fb-rpm-abs      => pid.s.feedback

Please Log in to join the conversation.

5 years 9 months ago #196447 by Steffen

Replied by Steffen on topic [SOLVED] Bug: PnCConf does not set up servo spindle PID feedback correctly.

it works, thank you very much.

Steffen

Please Log in to join the conversation.

Time to create page: 0.042 seconds