Whats wrong with my .xml file?

in pncconf the 5i25 shows up only as 5i25-Internal Data.No problem, there is a thread about this issue and I followed the instruction there. Then I copied all .xml files from the firmware folder provided from Mesanet and all was well.Really a lot of firmware to chose from. Next step was running mesaflash --device 5i25 --readhmid --xml and copying the output into a file and then load it to lib/firmware/hm2/5i25.Since then, pncconf gives me an error message like this when I try to pick a firmware;.raceback (most recent call last):  File "/usr/bin/pncconf", line 2027, in on_mesa_boardname_changed    self.fill_firmware(boardnum)  File "/usr/bin/pncconf", line 2045, in fill_firmware    if not d[self._p._BOARDTITLE] == title:continueTypeError: 'NoneType' object has no attribute '__getitem__'no idea what that means,but I think my .xml file is somewhat wrong can somebody help me?BTW.merry Christmas 
edit I changed the xml file

At a guess it might not be finding the file where it expects to find it:

github.com/LinuxCNC/linuxcnc/blob/2.8/sr...onf/pncconf.py#L2038

The error message hints that "d" is empty at that point.

What version of LinuxCNC are you using? the line referenced is not 2045 in either master or 2.8.

I am running 2.8.2

Andreas_Rackow wrote:

I am running 2.8.2

OK, I fired up 2.8.2 and tried to use your xml file. 

The problem is that the xml contains a number of empty "secondaryfunctionname" tags, like

If you do a find and replace to 

Then it seems to work. 

Ok, that sounds like a hint.
I try that.

Problem solved. This thread did for me.
forum.linuxcnc.org/39-pncconf/39650-mesa...patible-with-pncconf

thank you