Mesa 7i96 ETH + Mesa 7i80 ETH

Thanks.. my bad. Needed 1 more 0 to the address gpio.048 the correct. One more question. I use linear scales to axes. A-AN B-BN channels. Its working fine. But i have an MPG encoder. Only A and B channel. Is it work only A and B signal? Without AN amd BN.

1. 7I97 encoder inputs can be jumpers to accept single ended (A,B,Z only) or differential
inputs (A,/A, B,/B, Z,/Z)

2. You can use 7I97 isolated inputs 0..7 to support up to 4 MPG encoders. These
have the advantage that they support 1X mode which is desirable for standard
100 PPR MPGs