LinuxCNC 2.9 RPi - PNCconf error

mor
Offline
Junior Member

3 years 7 months ago #267747 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

Just for your reference:
1. Installed latest RPi OS 64-bit.
2. Installed latest available PREEMPT_RT kernel from kdoren GitHub.
3. Built 2.9 from source.

Thanks again for the support!

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

3 years 7 months ago #267749 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

on the external controls page, click on 'serial vfd'

Please post an image of that page.

Please Log in to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267750 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

Was trying to figure out how to upload an image. Then saw the big "Attachments" button. Braindead right now.

Please Log in to join the conversation.

phillc54
Offline
Platinum Member

3 years 7 months ago #267752 by phillc54

Replied by phillc54 on topic LinuxCNC 2.9 RPi - PNCconf error

While waiting for my RPI to update I ran PNCconf to the end and noticed this error if I selected a 7i96s:

Warning: Spoiler!

I don't see that if I select a 7i96.

Please Log in to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267753 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

I get the error before the Mesa page; see above post with attached image.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

3 years 7 months ago #267755 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

Ok I see the serial port entry is not filled.
let me look into that.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

3 years 7 months ago #267757 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

in src/emc/usr_intf/pncconf/pages.py

modify the function to this:

Code:

    def search_for_serial_device_name(self):
        match = os.popen("""ls /sys/class/tty/*/device/driver | grep 'driver' | cut -d "/" -f 5""").read().split()
        if len(match) <1: return
        model = self.w.gs2_vfd_device_name.get_model()
        model.clear()
        for item in match:
            name = '/dev/%s'%item
            model.append((name,))

Please Log in to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267758 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

I made the changes, do I need to rebuild everything? Sorry if this is a n00b question.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

3 years 7 months ago #267759 by cmorley

Replied by cmorley on topic LinuxCNC 2.9 RPi - PNCconf error

yes you need to run make after.

Please Log in to join the conversation.

mor
Offline
Junior Member

3 years 7 months ago #267760 by mor

Replied by mor on topic LinuxCNC 2.9 RPi - PNCconf error

Okay, it's compiling now. So I just remake the .deb and install all over again?

I'll do that and let you know how it goes. Thanks again for all the help!

Please Log in to join the conversation.

Time to create page: 0.059 seconds

LinuxCNC 2.9 RPi - PNCconf error

Attachment not found