7i96s why this, what next?

More
4 years 1 month ago #252098 by Masiwood123
7i96s why this, what next? was created by Masiwood123

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #252103 by PCW
Replied by PCW on topic 7i96s why this, what next?
The 7I96S requires LinuxCNC 2.9 (or the upcoming LinuxCNC2.8.4)

Please Log in to join the conversation.

More
4 years 1 month ago #252105 by Masiwood123
Replied by Masiwood123 on topic 7i96s why this, what next?
I i have installed 2.9. according to the instructions of JT debian 11.4 and followed all the instructions, I also changed the name in the ini file to 7i96s.0 and made a couple of configurations in each of them there is this error..

Please Log in to join the conversation.

More
4 years 1 month ago #252108 by PCW
Replied by PCW on topic 7i96s why this, what next?
You must have an old version of LinuxCNC 2.9 (April 2022 or earlier),
that is, before the 7I96S was added.

Please Log in to join the conversation.

More
4 years 1 month ago #252111 by Masiwood123
Replied by Masiwood123 on topic 7i96s why this, what next?
ok i will try to reinstall but i don't know from which source? i fin 

Attachment not found

d it ``build'' with so many sources available so confusing, i used this source from JT

Please Log in to join the conversation.

More
4 years 1 month ago #252125 by PCW
Replied by PCW on topic 7i96s why this, what next?
If you are using a deb you can get the latest here:

packages.debian.org/source/unstable/linuxcnc

(This is from Sept 9)

If you are building from source, just use the lastest master

Please Log in to join the conversation.

More
4 years 1 month ago #252149 by Masiwood123
Replied by Masiwood123 on topic 7i96s why this, what next?
this solved the problem, now it recognizes 7i96s, and loads the configuration without error, however until item A in the configuration it won't accept forward..only xyz?
 

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #252151 by Masiwood123
Replied by Masiwood123 on topic 7i96s why this, what next?
SOlved stepper scale was the problem

Please Log in to join the conversation.

Time to create page: 0.406 seconds
Powered by Kunena Forum