Can’t configure board ip in pncconf

More
4 years 1 month ago #252212 by joshuahuman
Can’t configure board ip in pncconf was created by joshuahuman
I’m trying to set up my Mesa 7i76e in pncconf and the box to enter the Mesa ip is missing. If I continue I can’t  get any output from the Mesa board when trying to configure the motors and when I try to run the configuration it crashes. This is on a fresh install of 2.8.0 and i’m able to ping the Mesa board no problem.

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #252213 by tommylight
Replied by tommylight on topic Can’t configure board ip in pncconf
Click on "accept component changes".

Please Log in to join the conversation.

More
4 years 1 month ago #252214 by joshuahuman
Replied by joshuahuman on topic Can’t configure board ip in pncconf
I have and it still doesn’t add a box for the IP address.

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #252217 by cmorley
Replied by cmorley on topic Can’t configure board ip in pncconf
If it's truly linuxcnc 2.8.0 - I would upgrade to 2.8.3

Please Log in to join the conversation.

More
4 years 1 month ago #252218 by tommylight
Replied by tommylight on topic Can’t configure board ip in pncconf
Scroll down, you have a very small screen.

Please Log in to join the conversation.

More
4 years 1 month ago #252220 by joshuahuman
Replied by joshuahuman on topic Can’t configure board ip in pncconf
I can’t I tried with a trackpad and a mouse. Also I’m not able to resize the window by dragging or by using the menu in the top left.

Please Log in to join the conversation.

More
4 years 1 month ago #252221 by tommylight
Replied by tommylight on topic Can’t configure board ip in pncconf
Can you drag the thin line that the red arrow is pointing to?

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #252222 by joshuahuman
Replied by joshuahuman on topic Can’t configure board ip in pncconf
Just tried it nothing happens.

Please Log in to join the conversation.

More
4 years 1 month ago #252224 by tommylight
Replied by tommylight on topic Can’t configure board ip in pncconf
Out of ideas, and out to bed, it is almost 4 AM here. :)

Please Log in to join the conversation.

More
4 years 1 month ago #252226 by joshuahuman
Replied by joshuahuman on topic Can’t configure board ip in pncconf
Thanks for trying I guess I’ll try doing another fresh install.

Please Log in to join the conversation.

Time to create page: 0.731 seconds
Powered by Kunena Forum