Stepper info

More
3 years 10 months ago #260118 by Aldenflorio
Stepper info was created by Aldenflorio
I plan on using these  Motors with these  drivers . How do I figure out the stepper info and how the dip switches are suppose to be? Along with that I plan on using a 3:1 gear reduction ratio. How do I figure out what to set the entire motor page age

Please Log in to join the conversation.

More
3 years 10 months ago #260147 by andypugh
Replied by andypugh on topic Stepper info
Just pick a pulse-per-rev that gives you the speed you need from the step generator that you are using.

Please Log in to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum