Only one Y Stepper is working

More
3 years 1 month ago #279740 by Elias B.
Replied by Elias B. on topic Only one Y Stepper is working
I have the MLM8-3002NA in the NPN configuration, these are inductive switches. They are all working as far as I see. On their top is a red light which ignites in case of activation.

Please Log in to join the conversation.

More
3 years 1 month ago #279741 by tommylight
Replied by tommylight on topic Only one Y Stepper is working
PNP or NPN switches?

Please Log in to join the conversation.

More
3 years 1 month ago #279742 by Elias B.
Replied by Elias B. on topic Only one Y Stepper is working
NPN

Please Log in to join the conversation.

More
3 years 1 month ago #279748 by tommylight
Replied by tommylight on topic Only one Y Stepper is working
Probably will need resistors for each sensor, from +24V to each input on Mesa/sensor out.
7i76 or 7i76D?

Please Log in to join the conversation.

More
3 years 1 month ago #279750 by Elias B.
Replied by Elias B. on topic Only one Y Stepper is working
7i76

Please Log in to join the conversation.

More
3 years 1 month ago #279751 by Elias B.
Replied by Elias B. on topic Only one Y Stepper is working
This is the exact error i am getting, which joint it will be is random
cdn.discordapp.com/attachments/114788872...6712411/IMG_6345.jpg
Image is to big for an upload.

Please Log in to join the conversation.

More
3 years 1 month ago #279753 by Elias B.
Replied by Elias B. on topic Only one Y Stepper is working
Found the issue, the output voltage is exactly the threshold of the 7i76

Please Log in to join the conversation.

Time to create page: 0.048 seconds
Powered by Kunena Forum