If, endif and Return in Subroutine

Hello all Knowing Linuxcnc Users!

I am Trying to Use the if - endif with the subroutine Return in subroutines. I want to use it with Parameters and calculating that i must not user the repeat function.

I have already read the Limit of Boxes in Linuxcnc. But there i am not in the near of the Limit.


Here is the sample code witch i have written with the Documentation of Linuxcnc

I Have tried multiple configurations of if and endif. When i Try o1104 Repeat and Endrepeat then the Contour will be done correctly multiple times.

I hope someone could help me to get this working.

Sorry for my bad english i try my best.

Thank you for Reading and have a nice day
Roland

Hi

Very hard to be clear, because this sub does not actually do anything. (ie whatever it decides based upon the value of #3 is not acted upon, because that param is not passed to Z so it never plunges regardless of the value)

The main problem at present is the nesting of one sub declaration inside another and both subs calling themselves.

If all you want is to check the plunge depth and stop it at a certain point, this could be done inside a loop in the main program much more simply, or with a small and very simple sub.

Probably need some more info and the code using the sub to see what you want to achieve

regards

I think you probably want to use WHILE and ENDWHILE

andypugh wrote: I think you probably want to use WHILE and ENDWHILE

Indeed,

This whole section of code, should never occur inside another sub

and could simply be replaced by

although it is arguable that the only sub you need is 01103 and the whole thing could be in the main body of code

regards

Dear Arc and Andy! I am so happy that you understand my not Native English :blush:

Thank you Andy for your Inspiration!

Big Thanks to ArcEye for the Example for and NOOB as mine
I Try your code and modified it so it works perfectly for me.

Now my Programs are near to Heidenhain Parameter Programs.

*Whisper to ArcEye- next time i will make a new try to get you Pedant working on my Ho-made Machine. Is there a Easy way to get an Optical encoder on it for jog the axis?*

Thank you for your big help

if i could i want to give you 400 Karma:)