subroutine_path doesn't match

More
10 years 4 weeks ago #81126 by Michou09
subroutine_path doesn't match was created by Michou09
if i put a subroutine in directory nc_files, all is ok
but if i try to change for another one, specified in SUBROUTINE_PATH of ini file, it doesn't work
I can understand why

Please Log in to join the conversation.

More
10 years 4 weeks ago #81129 by Rick G
Replied by Rick G on topic subroutine_path doesn't match
Are you sure you have entered the directories with the proper format?

linuxcnc.org/docs/html/gui/ngcgui.html

5.5. INI File Path Specifications
linuxcnc.org/docs/html/gui/ngcgui.html#_..._path_specifications

Rick G

Please Log in to join the conversation.

More
10 years 4 weeks ago #81142 by Michou09
Replied by Michou09 on topic subroutine_path doesn't match
Thanks for your fast answer

I tried to use many locations for my subroutines; no result

In my ini file, i have no reference to ngcgui ;

I use the latest version of linuxcnc (2.7)

In the previous one, i hadn't this trouble.

Is it the solution ?

MG

Please Log in to join the conversation.

More
10 years 4 weeks ago #81146 by BigJohnT
Replied by BigJohnT on topic subroutine_path doesn't match
We need to know what GUI, version of LinuxCNC and what operating system your using.

JT

Please Log in to join the conversation.

More
10 years 4 weeks ago #81148 by Michou09
Replied by Michou09 on topic subroutine_path doesn't match
On my new computer, i have installed Debian linuxcnc-2.7 wheezy
GUI is AXIS 2.7.7
all match on my milling machine, except the problem of subroutines, who must be located on directory /home/michou/linuxcnc/nc_files

Please Log in to join the conversation.

More
10 years 4 weeks ago #81154 by BigJohnT
Replied by BigJohnT on topic subroutine_path doesn't match
Either a typo or you put the entry in the wrong section of the ini file. Zip your configuration directory and attach it if you can't find the error.

JT

Please Log in to join the conversation.

More
10 years 4 weeks ago #81180 by Michou09
Replied by Michou09 on topic subroutine_path doesn't match
here is the gzip

Attachment not found

Please Log in to join the conversation.

More
9 years 9 months ago #86352 by bkt
Replied by bkt on topic subroutine_path doesn't match
The error was found?? I've the same problem .... for solve not use subroutine_path but onlu m_user_codes path for Mcustom ... and put subroutine into program prefix ..... bur was nice to can use subroutine_path.

regards
Giorgio

Please Log in to join the conversation.

Time to create page: 0.106 seconds
Powered by Kunena Forum