using the o conditional statement " if"

More
8 years 7 months ago #107116 by jensor
using the o conditional statement " if" was created by jensor
I haven't been able to nest the conditional "if" command such as:

o100 IF [#5 EQ 12]
o200 IF [#8 EQ 1]
code
o200 ENDIF
code
o100 ENDIF

Is it possible to nest conditionals?

Please Log in to join the conversation.

More
8 years 7 months ago #107119 by andypugh
Replied by andypugh on topic using the o conditional statement " if"
Yes, it is possible and your code ought to work.

What error do you see?

Please Log in to join the conversation.

More
8 years 7 months ago #107201 by jensor
Replied by jensor on topic using the o conditional statement " if"
My mistake Error was: bad '[' character used

Sorry, But thanks for your response.

Please Log in to join the conversation.

More
8 years 7 months ago #107300 by andypugh
Replied by andypugh on topic using the o conditional statement " if"
Does it say what line the error is on?

Please Log in to join the conversation.

More
8 years 7 months ago #107340 by jensor
Replied by jensor on topic using the o conditional statement " if"
Pretty obvious for the error now isn't it.

[X#2/2] Y[#2/2]

Seems like it is so difficult to spot programming errors.

Please Log in to join the conversation.

More
8 years 7 months ago #107341 by andypugh
Replied by andypugh on topic using the o conditional statement " if"
I was really just checking that the problem was solved. I had assumed that it was, but on re-reading the post it wasn't 100% clear.

Please Log in to join the conversation.

Time to create page: 0.085 seconds
Powered by Kunena Forum