Lathe Finish Cut with Radius

16 years 2 months ago #3725 by BigJohnT

Lathe Finish Cut with Radius was created by BigJohnT

This one is for a face cut with a radius at the edge of the diameter and a diameter final cut.

Enjoy
John

Please Log in to join the conversation.

16 years 2 months ago #3726 by BigJohnT

Replied by BigJohnT on topic Re:Lathe Finish Cut with Radius

This is the path created by the subroutine.

John

Please Log in to join the conversation.

Time to create page: 0.304 seconds