Lathe Taper OD

16 years 2 months ago #3791 by BigJohnT

Lathe Taper OD was created by BigJohnT

This one cuts a taper on the OD of a part.

Don't forget to rename to ngc.

John

Please Log in to join the conversation.

16 years 1 month ago #4276 by BigJohnT

Replied by BigJohnT on topic Re:Lathe Taper OD

If anyone wants the updated one let me know and I'll upload it.

John

Please Log in to join the conversation.

16 years 1 month ago #4355 by BigJohnT

Replied by BigJohnT on topic Re:Lathe Taper OD

Here is the corrected one.

John

Please Log in to join the conversation.

16 years 1 week ago #4729 by BigJohnT

Replied by BigJohnT on topic Re:Lathe Taper OD

A slightly improved one... using tool table tool diameter and cutter comp.

John

Please Log in to join the conversation.

Time to create page: 0.086 seconds