m6 remap

More
3 years 7 months ago #266484 by michelmorad2
m6 remap was created by michelmorad2
hello everyone 
I want to wirte an o-code to remap m6 , I have 4 (input sensor) and 2 (output for motor ) 
every input have tool , the programme should do , when i write m6 t1 the motor should turn (output 1 ) and when the input sensor 1 get high the motor should stop and then turn back (output 2 ) for 5 second  .
can any one help me please .
 

Please Log in to join the conversation.

More
3 years 7 months ago #266489 by smc.collins
Replied by smc.collins on topic m6 remap
you have a tool changer or turret ?

Please Log in to join the conversation.

More
3 years 7 months ago #266490 by michelmorad2
Replied by michelmorad2 on topic m6 remap
 I have turret (tool post )
 

Please Log in to join the conversation.

More
3 years 7 months ago #266513 by smc.collins
Replied by smc.collins on topic m6 remap
more information about the mechanism ?

Please Log in to join the conversation.

Time to create page: 0.123 seconds
Powered by Kunena Forum