Gscreen - a GTK / Glade / Python based screen

It is a hidden file, in your home directory.

Go to "Places" and click "Home Folder", then click "View" and select "Show Hidden Files".

You should find a file named ".gscreen_preferences", open that up and near the bottom you will see "embedded_keyboard=True", set that to false.



Rick

LAIR82 wrote: It is a hidden file, in your home directory.

Go to "Places" and click "Home Folder", then click "View" and select "Show Hidden Files".

You should find a file named ".gscreen_preferences", open that up and near the bottom you will see "embedded_keyboard=True", set that to false.



Rick

Does this hide the button for keyboard toggle as well?

No, it will not hide the button. If you wish to hide also the button, you will have to edit the glade file and set the visible property of the corresponding button too false.

Norbert

Rick,

Are you running gscreen on a mill or lathe?

Chris,

I have been toying with the idea for porttrait mode. I want to use a 19" or larger touch screen that would allow the bottom section to be the keyboard. Is this even possible?

We have two lathes running Gscreen, and soon to be 3, we will be starting our third retrofit in the next 2-3 weeks hopefully


Thanks

Rick

LAIR82 wrote: We have two lathes running Gscreen, and soon to be 3, we will be starting our third retrofit in the next 2-3 weeks hopefully


Thanks

Rick

Wow! is seems like only yesterday you were introducing your self on the fourm.

What hal pins are availble in gscreen? I am updated from touchy and just replaced the touchy with gscreen and it doesnt like it.

net X-jog-enable gscreen.jog.wheel.x axis.0.jog-enable
net Y-jog-enable gscreen.jog.wheel.y axis.1.jog-enable
net Z-jog-enable gscreen.jog.wheel.z axis.2.jog-enable
#
net cycle-start ppmc.0.din.32.in-not => gscreen.cycle-start and2.2.in0
#
net feed-hold-toggle ppmc.0.din.33.in => toggle.0.in
net feed-hold toggle.0.out => gscreen.single-block and2.2.in1
#
net toggle-abort and2.2.out => gscreen.abort
#
net XPosJog ppmc.0.din.37.in-not gscreen.jog.continuous.x.positive
net XNegJog ppmc.0.din.36.in-not gscreen.jog.continuous.x.negative
net YPosJog ppmc.0.din.38.in-not gscreen.jog.continuous.y.positive
net YNegJog ppmc.0.din.39.in-not gscreen.jog.continuous.y.negative
net ZPosJog ppmc.0.din.40.in-not gscreen.jog.continuous.z.positive
net ZNegJog ppmc.0.din.45.in-not gscreen.jog.continuous.z.negative
#
net ZRetract ppmc.0.din.30.in-not gscreen.quill-up

tjamscad wrote: Chris,

I have been toying with the idea for porttrait mode. I want to use a 19" or larger touch screen that would allow the bottom section to be the keyboard. Is this even possible?

try this (works on my laptop)
go to System / preferences / monitors

on the monitor screen there should be a checkbox for show monitors in panel - check it.
you should see a monitor appear in the panel. click it.
If you graphics card supports it you should see options to rotate the screen.

If that doesn't work then there are probably other ways - that you would need to research on the web.

Chris M

When you first start Gscreen, on the debug page, in the terminal are the current Gscreen pins.
Whether they do what you want .....

Chris M

PS yes the separate panel for controls would be just for testing .

Chris M

How do I add pins if there not there?