Screen shots of gui designs

I'm using QTDragon Dark and I love it. I modified it to handle Inch/MM everywhere based on the ini setting. I'm using a 1920x1080 touch screen. I lowered the resolution so that the current version fills the screen. I'll be looking forward to trying this.

Thanks
John

This version correctly displays units according to machine units and changes them dynamically when g20 or g21 is used. Feedback on any bugs is appreciated.

Thanks Jim.

JohnnyCNC wrote: Thanks Jim.

+1

What about cool softwares for it. I found this one called MD Python( labdeck.com/python/ ) and it's essentially an advanced VisualTk. A drag and drop Designer but with lots more components and doesn't have glitches like VisualTK.It's free but its got a limited amount of use. The unlimited version MD Python Designer is £15( labdeck.com/python-designer/ ) and if it interests you, I suggest you check out the GUI Designer( labdeck.com/python/python-gui-designer/ ) before anything.

Hello, I am interested in gmoccapy, if I ask, can you help me to write the articles in English on the button in my language? I also want to add another button or something. I could easily do this while working with Mach3, but after I switched to Linuxcnc, I was surprised because it was a topic I did not know ... Thanks in advance ..

mkose wrote: Hello, I am interested in gmoccapy, if I ask, can you help me to write the articles in English on the button in my language?

What is your language?

I think that you just need to make a copy of one of these files:
github.com/LinuxCNC/linuxcnc/tree/master/src/po/gmoccapy
named after your own language, and then change the second string in each section.

Gmoccapy is translated to German, English, Hungarian, French, spanisch, Serbian and Chinese
I woul be glad if you translate to an additional language. Just tell me witch language an will prepare the translation file for you. After translating, just send it back to me and I will integrate that one in LinuxCNC so it will be available for all users.

Norbert

Hi newbynobi, I would be grateful to you for this, I also recommend Gmoccapy in all cnc installations I go to, but they urge me to install Mach3 due to the TURKISH interface I prepared for Mach3, especially since it is not in TURKISH ... Therefore, I need to convert the interface to our language, TURKISH. Thank you in advance for your help.

andypugh wrote:

mkose wrote: Hello, I am interested in gmoccapy, if I ask, can you help me to write the articles in English on the button in my language?

What is your language?

I think that you just need to make a copy of one of these files:
github.com/LinuxCNC/linuxcnc/tree/master/src/po/gmoccapy
named after your own language, and then change the second string in each section.

TURKISH