Lathe Macros

More
4 years 1 month ago #252842 by andypugh
Replied by andypugh on topic Lathe Macros
I am not clear which version isn't working?

You probably need the old version with LinuxCNC 2.8 and Python 2.

Please Log in to join the conversation.

More
4 years 1 month ago #252843 by andypugh
Replied by andypugh on topic Lathe Macros
I am not clear which version isn't working?

You probably need the old version with LinuxCNC 2.8 and Python 2.

Please Log in to join the conversation.

More
4 years 1 month ago #252905 by virencq
Replied by virencq on topic Lathe Macros
Both are your versions.
Initial version of lathe macros with separate image files works well with 2.9.
Latest have only 1 .svg file.
I am running 2.9 installed as well as master RIP environment. Image is not showing, though input fields shows.
No luck in any of them, I need especially the drill section.

Please Log in to join the conversation.

More
4 years 1 month ago #253053 by andypugh
Replied by andypugh on topic Lathe Macros
If you are using 2.9 then the version in the repository really should work:
github.com/LinuxCNC/linuxcnc/tree/master...occapy/lathe_configs

You need the .svg, ui, .py and .ngc files.

Please Log in to join the conversation.

More
4 years 1 month ago #253093 by virencq
Replied by virencq on topic Lathe Macros
Yes, it's working on PC.
I am using Raspberry PI 4 for my lathe here it's not working.
I have installed RSVG too.

Please Log in to join the conversation.

More
4 years 1 month ago #253095 by andypugh
Replied by andypugh on topic Lathe Macros
What isn't working? What error messages do you see (you might have to start LinuxCNC from the command "linuxcnc" to see them)

Please Log in to join the conversation.

More
4 years 1 month ago #253102 by virencq
Replied by virencq on topic Lathe Macros
What isn't working? What error messages do you see (you might have to start LinuxCNC from the command "linuxcnc" to see them)
Macro Image not showing.
Below is the error message from the terminal.
 

Attachment not found

Please Log in to join the conversation.

More
4 years 1 month ago #253106 by andypugh
Replied by andypugh on topic Lathe Macros
**** GLADE VCP ERROR: With xml file: lathemacro.ui : could not create GladeXML object

Which version of libglade do you have installed? You could see if Synaptic has an update to offer.

Please Log in to join the conversation.

More
4 years 4 weeks ago #253239 by virencq
Replied by virencq on topic Lathe Macros
Checked libglade is updated.
What else to check

Please Log in to join the conversation.

More
4 years 4 weeks ago #253269 by andypugh
Replied by andypugh on topic Lathe Macros
Can you open the .ui file directly in the Glade editor?

Please Log in to join the conversation.

Time to create page: 0.726 seconds
Powered by Kunena Forum