Java UI for linuxcnc

Hi,

I added my native testcase, which I used to find out dependencies.
You could use that testcase to check your native build environment.
Just run followed by and you should see the librarys from above.
liblinuxcncini.so.0 is not needed any more, but look for libnml and liblinuxcnchal

Hi,

Tried to run make TestNML but it completes with error...can.t figure out the cause.
See attached log:

vasilemihalca@INV1047:~/Geeking/JCNCScreen$ cd native/
vasilemihalca@INV1047:~/Geeking/JCNCScreen/native$ make TestNML
g++ -c -I. -I/home/vasilemihalca/Geeking/JCNCScreen/native/lc/src -I/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include -I/usr/lib/jvm/java-11-openjdk-amd64/include -I/usr/lib/jvm/java-11-openjdk-amd64/include/linux -DULAPI -g -Wall -Os -fwrapv -Woverloaded-virtual -D_GNU_SOURCE -Wno-psabi -std=gnu++11 -MP -MD -o TestNML.o TestNML.cc
g++ -DLOCALE_DIR=\"/usr/share/locale\" -DPACKAGE=\"linuxcnc\" -L/home/vasilemihalca/Geeking/JCNCScreen/native/lc/lib /home/vasilemihalca/Geeking/JCNCScreen/native/lc/lib/libnml.so.0 -Wl,-rpath,/home/vasilemihalca/Geeking/JCNCScreen/native/lc/lib -Xlinker -Map=libLinuxCNC.map -L/usr/X11R6/lib -lm -lGL -o TestNML TestNML.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/rs274ngc/modal_state.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/tooldata/tooldata_common.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/tooldata/tooldata_mmap.o /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/tooldata/tooldata_db.o
/usr/bin/ld: TestNML.o: in function `init()':
/home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:34: undefined reference to `NML::operator new(unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:34: undefined reference to `RCS_CMD_CHANNEL::RCS_CMD_CHANNEL(int (*)(int, void*, CMS*), char const*, char const*, char const*, int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:35: undefined reference to `NML::valid()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:41: undefined reference to `NML::operator new(unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:41: undefined reference to `NML::NML(int (*)(int, void*, CMS*), char const*, char const*, char const*, int, int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:42: undefined reference to `NML::valid()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:50: undefined reference to `NML::operator new(unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:50: undefined reference to `RCS_STAT_CHANNEL::RCS_STAT_CHANNEL(int (*)(int, void*, CMS*), char const*, char const*, char const*, int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:51: undefined reference to `NML::valid()'
/usr/bin/ld: TestNML.o: in function `RCS_STAT_CHANNEL::get_address()':
/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/stat_msg.hh:41: undefined reference to `NML::get_address()'
/usr/bin/ld: TestNML.o: in function `init()':
/home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:34: undefined reference to `NML::operator delete(void*)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:41: undefined reference to `NML::operator delete(void*)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:50: undefined reference to `NML::operator delete(void*)'
/usr/bin/ld: TestNML.o: in function `fetchMessage(char*)':
/home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:69: undefined reference to `NML::valid()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:70: undefined reference to `NML::read()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:74: undefined reference to `NML::get_address()'
/usr/bin/ld: TestNML.o: in function `sendCommand(RCS_CMD_MSG&)':
/home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:81: undefined reference to `RCS_CMD_CHANNEL::write(RCS_CMD_MSG*)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:86: undefined reference to `NML::peek()'
/usr/bin/ld: TestNML.o: in function `EMC_TASK_CMD_MSG::EMC_TASK_CMD_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:1240: undefined reference to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:1240: undefined reference to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)'
/usr/bin/ld: TestNML.o: in function `EMC_JOINT_CMD_MSG::EMC_JOINT_CMD_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:180: undefined reference to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)'
/usr/bin/ld: TestNML.o: in function `EMC_JOG_CMD_MSG::EMC_JOG_CMD_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:133: undefined reference to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:133: undefined reference to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)'
/usr/bin/ld: TestNML.o:/home/vasilemihalca/Geeking/JCNCScreen/native/lc/include/emc_nml.hh:133: more undefined references to `RCS_CMD_MSG::RCS_CMD_MSG(int, long)' follow
/usr/bin/ld: TestNML.o: in function `main':
/home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:332: undefined reference to `NML::peek()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:337: undefined reference to `NML::peek()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:342: undefined reference to `NML::peek()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/TestNML.cc:347: undefined reference to `NML::peek()'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_OPERATOR_DISPLAY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:866: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `PmCartesian_update(CMS*, PmCartesian*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1095: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1096: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_ABS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:980: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_VECTOR_update(CMS*, CANON_VECTOR*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1326: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1327: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1482: more undefined references to `CMS::update(double&)' follow
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1483: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1484: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1485: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1486: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1487: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1666: more undefined references to `CMS::update(int&)' follow
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AXIS_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1838: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1804: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1805: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1806: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1807: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1808: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1809: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1810: more undefined references to `CMS::update(double&)' follow
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1817: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1818: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1819: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1820: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1821: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1822: more undefined references to `CMS::update(unsigned char&)' follow
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_LOAD_COMP::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2067: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_INCR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2116: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_ON::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2142: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2143: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2144: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_SPEED::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2157: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2158: more undefined references to `CMS::update(double&)' follow
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_TERM_COND::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1568: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_SPINDLESYNC::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1576: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_UNITS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2081: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_OPERATOR_ERROR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2242: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_LUBE_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2474: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EmcPose_update(CMS*, EmcPose*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2569: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2570: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2571: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2572: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2573: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_SET_OFFSET::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1440: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1441: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1443: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1444: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1445: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_LINEAR_MOVE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1528: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1529: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1530: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1531: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1532: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_CIRCULAR_MOVE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1548: undefined reference to `CMS::update(PM_CARTESIAN&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1549: undefined reference to `CMS::update(PM_CARTESIAN&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1550: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1551: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1552: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1553: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1554: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_TOOL_TABLE_update(CMS*, CANON_TOOL_TABLE*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1727: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1729: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1730: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1960: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1961: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1962: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1963: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1964: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1965: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1966: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1967: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1968: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1969: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1973: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1974: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1975: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1976: undefined reference to `CMS::update(double*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1977: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1978: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1979: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_G5X::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2328: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2370: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2371: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2372: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2373: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2374: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2375: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2376: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2377: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2378: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2379: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2380: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2381: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2382: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2383: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2386: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2387: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2388: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2389: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2391: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2392: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2393: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2394: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_HOMING_PARAMS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2651: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2652: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2653: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2654: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2655: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2656: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2657: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2658: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_COOLANT_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2710: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_IO_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:792: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:793: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_POSITION_update(CMS*, CANON_POSITION*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2735: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2736: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2737: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2738: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2739: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_PROBE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2842: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2843: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2844: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2845: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AUX_INPUT_WAIT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2858: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2859: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2860: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_RIGID_TAP::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2876: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2877: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_SET_AOUT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1365: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1366: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1367: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_SET_DOUT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2952: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2953: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2954: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_OPERATOR_DISPLAY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:867: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SYSTEM_CMD::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:878: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_CONSTANT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:946: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `PmCartesian_update(CMS*, PmCartesian*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1097: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_STAT_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1235: undefined reference to `CMS::update(unsigned int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_CMD_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1269: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_UNITS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:933: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_FERROR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1110: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_MIN_POSITION_LIMIT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1123: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_CMD_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1276: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_ABS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:981: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_CONT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1315: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_VECTOR_update(CMS*, CANON_VECTOR*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1328: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_JOINT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1415: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1488: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_MAX_POSITION_LIMIT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1500: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_PREPARE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1014: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_SET_NUMBER::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1459: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_PLAN_RUN::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1589: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_OPERATOR_TEXT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1667: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_DECREASE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1716: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_IO_STAT_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1742: undefined reference to `CMS::update(unsigned int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_EXEC_PLUGIN_CALL::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1768: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_IO_PLUGIN_CALL::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1781: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:903: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AXIS_STAT_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1850: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AXIS_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1839: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_LOAD_TOOL_TABLE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2018: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_SET_STATE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2031: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_STAT_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2054: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1826: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_LOAD_COMP::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2068: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_SET_MODE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2105: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOG_INCR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2117: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_ON::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2145: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_SPEED::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2159: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_ORIENT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2173: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_WAIT_ORIENT_COMPLETE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2185: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_DELAY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:969: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_VELOCITY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1149: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_MOTION_ID::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1174: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_ACCELERATION::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1211: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_CYCLE_TIME::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1248: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_TERM_COND::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1569: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_SPINDLESYNC::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1577: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_SCALE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1874: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_RAPID_SCALE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1882: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_SPINDLE_SCALE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1895: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_FO_ENABLE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1908: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_SO_ENABLE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1921: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_FH_ENABLE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1934: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_AXES::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2005: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_UNITS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2082: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_OPERATOR_ERROR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2243: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_MAX_VELOCITY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2256: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SET_DEBUG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2267: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_BACKLASH::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2315: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_ROTATION::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2345: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_MAX_ACCELERATION::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2451: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_LUBE_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2475: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_SPINDLE_INCREASE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2488: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_MIN_FERROR::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2523: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EmcPose_update(CMS*, EmcPose*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2574: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TOOL_SET_OFFSET::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1446: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_LINEAR_MOVE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1533: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_CIRCULAR_MOVE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1555: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_TOOL_TABLE_update(CMS*, CANON_TOOL_TABLE*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1731: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1980: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2395: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AUX_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1224: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_MAX_VELOCITY::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2626: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_PLAN_OPEN::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2639: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_JOINT_SET_HOMING_PARAMS::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2659: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_MODE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2672: undefined reference to `CMS::update(int*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_PLAN_EXECUTE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2685: undefined reference to `CMS::update(char*, unsigned int)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_COOLANT_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2711: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_SET_TELEOP_ENABLE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2724: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `CANON_POSITION_update(CMS*, CANON_POSITION*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2740: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_PLAN_SET_OPTIONAL_STOP::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2778: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TASK_PLAN_SET_BLOCK_DELETE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2792: undefined reference to `CMS::update(bool&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_STAT_MSG::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2816: undefined reference to `CMS::update(unsigned int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2589: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_STAT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1304: undefined reference to `CMS::update(int&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_PROBE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2846: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_AUX_INPUT_WAIT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2861: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_TRAJ_RIGID_TAP::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2878: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_SET_AOUT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:1368: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_SET_DOUT::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2955: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_MOTION_ADAPTIVE::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2969: undefined reference to `CMS::update(unsigned char&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emc.o: in function `EMC_IO_SET_CYCLE_TIME::update(CMS*)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc.cc:2994: undefined reference to `CMS::update(double&)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o: in function `EMC_JOINT_STAT_MSG::EMC_JOINT_STAT_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:499: undefined reference to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o: in function `EMC_TRAJ_STAT_MSG::EMC_TRAJ_STAT_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:1016: undefined reference to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o: in function `EMC_TASK_STAT_MSG::EMC_TASK_STAT_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:1475: undefined reference to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o: in function `EMC_TOOL_STAT_MSG::EMC_TOOL_STAT_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:1652: undefined reference to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o: in function `EMC_AUX_STAT_MSG::EMC_AUX_STAT_MSG(int, unsigned long)':
/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:1738: undefined reference to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)'
/usr/bin/ld: /home/vasilemihalca/Geeking/JCNCScreen/native/lc/src/objects/emc/nml_intf/emcops.o:/home/vasilemihalca/Geeking/linuxcnc/src/emc/nml_intf/emc_nml.hh:1182: more undefined references to `RCS_STAT_MSG::RCS_STAT_MSG(int, unsigned long)' follow
collect2: error: ld returned 1 exit status
make: *** [Makefile:60: TestNML] Error 1

Hi,

please wrap such endless texts in "code"-tag - improves readability of your posts

All your errors point to not-existing or invalid libnml.
Verify that /home/vasilemihalca/Geeking/JCNCScreen/native/lc/lib/libnml.so.0 is existant and results in something like this:

Here is my result: 

librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f3815c0f000)

Hi,

you're improving your posts. Very nice!
Most forums support BBCode .
.

vmihalca wrote: It seems that I have one missing:

That leads to the question: how did you compile your linuxcnc?
Or better asked: what switches did you add to your ./configure call?

It was quite before I started playing with your java ui.
Don't quite rememeber..
I can recompile it, any idea what options should I use so that it matches yours?

Thanks!

Don't quite rememeber..
I can recompile it ...

That would be a good idea.
But first you should issue a make clean from src-directory.
Well, everything in linuxcnc should be initiated from src-directory.
I wrote the options in a shellscript, so I don't have to remember the options used.
My script is this: you can omit the second line. It bloats the nml-status area, but I didn't found out yet, how to access live tooltable without that parameter.

Any way - I consider my app as master in cnc-control-area, so I can process tooltable-file by myself (already implemented) and keep track of ongoing changes (not implemented yet).

Ah, forgot to mention:
If you use --enable-toolnml for linuxcnc, you have to compile native stuff with

If I ran the following command: 
I get the result attached in the screenshot, I think its an issue with the versions of Tcl and Tk libs since I already have them installed. 
Can you tell me what version do you have for these libs?

I get the result attached in the screenshot, I think its an issue with the versions of Tcl and Tk libs since I already have them installed.

I wonder - how did you compiled linuxcnc last time? Strange

I don't know slack or its package system.
On debian system there's a package called "python-tk" (for python 2.xx) and "python3-tk" for (python 3.xx)
You shouls search your package system for the appropriate package for python 2.xx and install that.