GScreen limit switch issue

More
4 years 8 months ago #234568 by cmorley
Replied by cmorley on topic GScreen limit switch issue
Yes please post your original file.
I guess the file I based my changes to was newer then what you are using.

Please Log in to join the conversation.

More
4 years 8 months ago #234612 by Ivan_The_Red
Replied by Ivan_The_Red on topic GScreen limit switch issue
Thanks for continuing with this,i've attached my emc_interface.py file below so you can take a look at it and if you have any luck with it then Ill give it a shot.
Enjoy the weekend....cheers

Please Log in to join the conversation.

More
4 years 8 months ago #234615 by cmorley
Replied by cmorley on topic GScreen limit switch issue
Ok here is your modified file:
 

Please Log in to join the conversation.

More
4 years 8 months ago #234639 by Ivan_The_Red
Replied by Ivan_The_Red on topic GScreen limit switch issue
the scrolling error seems to be fixed but theres another problem ..... when you turn the machine back on, the axis that tripped the limit switch takes off and wont stop until you hit estop or power the machine back off.

Please Log in to join the conversation.

More
4 years 8 months ago #234665 by cmorley
Replied by cmorley on topic GScreen limit switch issue
ok here is another try.

Chris

Please Log in to join the conversation.

More
4 years 8 months ago #234698 by Ivan_The_Red
Replied by Ivan_The_Red on topic GScreen limit switch issue
hi Chris, that worked perfectly....no more scrolling error messages and the axis stays put when the machines powered back up.

Can I venmo you a token of my appreciation? this isnt the first time youve taken time to help me out.

Please Log in to join the conversation.

More
4 years 8 months ago #234716 by cmorley
Replied by cmorley on topic GScreen limit switch issue
Excellent!

I had to look up what Venmo was lol.
I appreciate the offer, but I'm just glad we got it fixed.
Happy machining.

Chris

Please Log in to join the conversation.

More
4 years 8 months ago #234782 by Ivan_The_Red
Replied by Ivan_The_Red on topic GScreen limit switch issue
Well, thanks again for your help.

Please Log in to join the conversation.

Time to create page: 0.232 seconds
Powered by Kunena Forum