Vismac tible window bar

Hi .
if a sim / vismach / 3axis-tutorial configuration is started, the TK window opens, where the virtual machine is represented. The title of the open window is tk, is it possible to change the name TK to another title?

Thanks

adding "app.title("new name") might work:
github.com/LinuxCNC/linuxcnc/blob/master...hon/vismach.py#L1014

Hi Andy , more thanks it is ok.
Another question .
is there a keyboard command or other to delete the tool path made by the tool?

Thanks

It looks like there should be a HAL pin:

github.com/LinuxCNC/linuxcnc/blob/master...hon/vismach.py#L1025

OK it fuction.

More thanks Andy.

I have another question.
The tool drawing the toolpaph with red color , but not change color if command is G0 or working command(g1 ecc..)
How can change tool drawing color for G0 .

Thanks

Vismach doesn't receive any information about the motion mode, so I would say that this isn't possible without changes to the Vismach code.