Large File Memory

More
1 year 10 months ago #316644 by kjlty
Large File Memory was created by kjlty
 

Attachment not found

 

Attachment not found

Please Log in to join the conversation.

More
1 year 10 months ago #316645 by kjlty
Replied by kjlty on topic Large File Memory
Hello expert, look at the picture description, can you optimize the memory usage?专家你好，看图片描述，你能优化内存使用吗？ 

Please Log in to join the conversation.

More
1 year 10 months ago #316662 by JT
Replied by JT on topic Large File Memory
(PREVIEW, stop) is some other GUI command, in Flex you uncheck the show program button like I showed above. I have no control over what LinuxCNC does when you open a program, I can only turn off or on the preview.

gnipsel.com/linuxcnc/flexgui/plotter.html#display

JT

Please Log in to join the conversation.

More
1 year 10 months ago #316737 by kjlty
Replied by kjlty on topic Large File Memory
Is there any way to improve the loading speed of G-CODE, reduce the memory footprint, and operate the response speed of G5X? Updating the plot in real time is too much of an impact on the experience, and the GUI is unresponsive.

Please Log in to join the conversation.

More
1 year 10 months ago #316745 by JT
Replied by JT on topic Large File Memory
Sure just delete the plotter.

JT

Please Log in to join the conversation.

More
1 year 10 months ago #316751 by kjlty
Replied by kjlty on topic Large File Memory
Deleting the plot page in QT-Designer has no effect.

Please Log in to join the conversation.

More
1 year 10 months ago #316754 by kjlty
Replied by kjlty on topic Large File Memory
I don't think plotter is a must-have feature, and if you can optimize the responsiveness of the Flex GUI to large files, then it's perfect. Thank you!

Please Log in to join the conversation.

More
1 year 10 months ago #316763 by JT
Replied by JT on topic Large File Memory
Does Axis open that large file without any delay?

JT

Please Log in to join the conversation.

More
1 year 10 months ago #316827 by cmorley
Replied by cmorley on topic Large File Memory
Could be the gcode text preview. The high lighting can be cpu intensive.
Could you post a sample large file that shows the problem?

Please Log in to join the conversation.

More
1 year 10 months ago #316834 by kjlty
Replied by kjlty on topic Large File Memory
AXIS also takes a long time to open it, plus (AXIS, stop) is the same (BUG?), tklinuxcnc response is positive, whether it is loading G-CODE or artifact coordinate offset, but it only has 3 axes.

Please Log in to join the conversation.

Time to create page: 0.097 seconds
Powered by Kunena Forum