Keine USB-Ports bzw keine Tastatur/Maus

Nov 10 09:35:30 CNC kernel: imklog 5.8.11, log source = /proc/kmsg started. Nov 10 09:35:30 CNC rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2628" x-info="http://www.rsyslog.com"] start Nov 10 09:35:30 CNC kernel: [ 0.000000] Initializing cgroup subsys cpuset Nov 10 09:35:30 CNC kernel: [ 0.000000] Initializing cgroup subsys cpu Nov 10 09:35:30 CNC kernel: [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-provided physical RAM map: Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 0000000004000000 - 000000000400a000 (ACPI NVS) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 000000000400a000 - 0000000009d00000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 0000000009d00000 - 000000000a000000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 000000000a000000 - 000000000b000000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 000000000b000000 - 000000000b020000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 000000000b020000 - 00000000da0c4000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000da0c4000 - 00000000db5c0000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000db5c0000 - 00000000db5e1000 (ACPI data) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000db5e1000 - 00000000dba92000 (ACPI NVS) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000dba92000 - 00000000dc858000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000dc858000 - 00000000df000000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000df000000 - 00000000e0000000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fea00000 - 00000000fea10000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000feb80000 - 00000000fec02000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fec30000 - 00000000fec31000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fedc2000 - 00000000fedd0000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fedd4000 - 00000000fedd6000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000081f380000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Nov 10 09:35:30 CNC kernel: [ 0.000000] SMBIOS 2.8 present. Nov 10 09:35:30 CNC kernel: [ 0.000000] DMI: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6001 02/09/2018 Nov 10 09:35:30 CNC kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Nov 10 09:35:30 CNC kernel: [ 0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x100000 Nov 10 09:35:30 CNC kernel: [ 0.000000] MTRR default type: uncachable Nov 10 09:35:30 CNC kernel: [ 0.000000] MTRR fixed ranges enabled: Nov 10 09:35:30 CNC kernel: [ 0.000000] 00000-9FFFF write-back Nov 10 09:35:30 CNC kernel: [ 0.000000] A0000-BFFFF write-through Nov 10 09:35:30 CNC kernel: [ 0.000000] C0000-FFFFF write-protect Nov 10 09:35:30 CNC kernel: [ 0.000000] MTRR variable ranges enabled: Nov 10 09:35:30 CNC kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back Nov 10 09:35:30 CNC kernel: [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back Nov 10 09:35:30 CNC kernel: [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back Nov 10 09:35:30 CNC kernel: [ 0.000000] 3 disabled Nov 10 09:35:30 CNC kernel: [ 0.000000] 4 disabled Nov 10 09:35:30 CNC kernel: [ 0.000000] 5 disabled Nov 10 09:35:30 CNC kernel: [ 0.000000] 6 disabled Nov 10 09:35:30 CNC kernel: [ 0.000000] 7 disabled Nov 10 09:35:30 CNC kernel: [ 0.000000] TOM2: 0000000820000000 aka 33280M Nov 10 09:35:30 CNC kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Nov 10 09:35:30 CNC kernel: [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) Nov 10 09:35:30 CNC kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 Nov 10 09:35:30 CNC kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Nov 10 09:35:30 CNC kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Nov 10 09:35:30 CNC kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Nov 10 09:35:30 CNC kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Nov 10 09:35:30 CNC kernel: [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] Nov 10 09:35:30 CNC kernel: [ 0.000000] RAMDISK: 36417000 - 37203000 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: RSDP 000f05b0 00024 (v02 ALASKA) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: XSDT db5c6098 000A4 (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: FACP db5cf488 00114 (v06 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI Warning: FADT (revision 6) is longer than ACPI 5.0 version, truncating length 276 to 268 (20120320/tbfadt-294) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: DSDT db5c61d0 092B1 (v02 ALASKA A M I 01072009 INTL 20120913) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: FACS dba7ae00 00040 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: APIC db5cf5a0 000DE (v03 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: FPDT db5cf680 00044 (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: FIDT db5cf6c8 0009C (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5cf768 08C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5d8400 02314 (v01 AMD AMD CPU 00000001 AMD 00000001) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: CRAT db5da718 00F50 (v01 AMD AMD CRAT 00000001 AMD 00000001) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: CDIT db5db668 00029 (v01 AMD AMD CDIT 00000001 AMD 00000001) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5db698 02DA5 (v01 AMD AMD AOD 00000001 INTL 20120913) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: MCFG db5de440 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5de748 01993 (v01 AMD AmdTable 00000001 INTL 20120913) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: HPET db5de4d8 00038 (v01 ALASKA A M I 01072009 AMI 00000005) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5de510 00024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: UEFI db5de538 00042 (v01 00000000 00000000) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IVRS db5de580 000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: SSDT db5de650 000F8 (v01 AMD AMD PT 00001000 INTL 20120913) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 10 09:35:30 CNC kernel: [ 0.000000] 2680MB HIGHMEM available. Nov 10 09:35:30 CNC kernel: [ 0.000000] 887MB LOWMEM available. Nov 10 09:35:30 CNC kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Nov 10 09:35:30 CNC kernel: [ 0.000000] low ram: 0 - 377fe000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Zone PFN ranges: Nov 10 09:35:30 CNC kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Nov 10 09:35:30 CNC kernel: [ 0.000000] HighMem 0x000377fe -> 0x000df000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Movable zone start PFN for each node Nov 10 09:35:30 CNC kernel: [ 0.000000] Early memory PFN ranges Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009d Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x00000100 -> 0x00004000 Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x0000400a -> 0x00009d00 Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x0000a000 -> 0x0000b000 Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x0000b020 -> 0x000da0c4 Nov 10 09:35:30 CNC kernel: [ 0.000000] 0: 0x000dc858 -> 0x000df000 Nov 10 09:35:30 CNC kernel: [ 0.000000] On node 0 totalpages: 902351 Nov 10 09:35:30 CNC kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4837200 Nov 10 09:35:30 CNC kernel: [ 0.000000] DMA zone: 32 pages used for memmap Nov 10 09:35:30 CNC kernel: [ 0.000000] DMA zone: 0 pages reserved Nov 10 09:35:30 CNC kernel: [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 Nov 10 09:35:30 CNC kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Nov 10 09:35:30 CNC kernel: [ 0.000000] Normal zone: 220676 pages, LIFO batch:31 Nov 10 09:35:30 CNC kernel: [ 0.000000] HighMem zone: 5361 pages used for memmap Nov 10 09:35:30 CNC kernel: [ 0.000000] HighMem zone: 670589 pages, LIFO batch:31 Nov 10 09:35:30 CNC kernel: [ 0.000000] Using APIC driver default Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x8 ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x9 ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0xa ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xb ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 12/0xc ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 13/0xd ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 14/0xe ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 15/0xf ignored. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IOAPIC (id[0x11] address[0xfec00000] gsi_base[0]) Nov 10 09:35:30 CNC kernel: [ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IOAPIC (id[0x12] address[0xfec01000] gsi_base[24]) Nov 10 09:35:30 CNC kernel: [ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IRQ0 used by override. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IRQ2 used by override. Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: IRQ9 used by override. Nov 10 09:35:30 CNC kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Nov 10 09:35:30 CNC kernel: [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 Nov 10 09:35:30 CNC kernel: [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 Nov 10 09:35:30 CNC kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs Nov 10 09:35:30 CNC kernel: [ 0.000000] nr_irqs_gsi: 72 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 0000000004000000 - 000000000400a000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 0000000009d00000 - 000000000a000000 Nov 10 09:35:30 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000b000000 - 000000000b020000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Nov 10 09:35:30 CNC kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Nov 10 09:35:30 CNC kernel: [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7762000 s48384 r0 d21248 u69632 Nov 10 09:35:30 CNC kernel: [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 Nov 10 09:35:30 CNC kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Nov 10 09:35:30 CNC kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 895214 Nov 10 09:35:30 CNC kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=89cd3693-0013-4b3c-a2cf-24160b7c0f6e ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 Nov 10 09:35:30 CNC kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Nov 10 09:35:30 CNC kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 10 09:35:30 CNC kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 10 09:35:30 CNC kernel: [ 0.000000] Initializing CPU#0 Nov 10 09:35:30 CNC kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Nov 10 09:35:30 CNC kernel: [ 0.000000] allocated 7307136 bytes of page_cgroup Nov 10 09:35:30 CNC kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Nov 10 09:35:30 CNC kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:000df000) Nov 10 09:35:30 CNC kernel: [ 0.000000] Memory: 3552184k/3653632k available (3495k kernel code, 57220k reserved, 1237k data, 416k init, 2703800k highmem) Nov 10 09:35:30 CNC kernel: [ 0.000000] virtual kernel memory layout: Nov 10 09:35:30 CNC kernel: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) Nov 10 09:35:30 CNC kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Nov 10 09:35:30 CNC kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Nov 10 09:35:30 CNC kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Nov 10 09:35:30 CNC kernel: [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) Nov 10 09:35:30 CNC kernel: [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) Nov 10 09:35:30 CNC kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) Nov 10 09:35:30 CNC kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Nov 10 09:35:30 CNC kernel: [ 0.000000] Preemptible hierarchical RCU implementation. Nov 10 09:35:30 CNC kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Nov 10 09:35:30 CNC kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:1288 16 Nov 10 09:35:30 CNC kernel: [ 0.000000] CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Extended CMOS year: 2000 Nov 10 09:35:30 CNC kernel: [ 0.000000] Interrupt pipeline (release #3) Nov 10 09:35:30 CNC kernel: [ 0.000000] spurious 8259A interrupt: IRQ7. Nov 10 09:35:30 CNC kernel: [ 0.000000] Console: colour VGA+ 80x25 Nov 10 09:35:30 CNC kernel: [ 0.000000] console [tty0] enabled Nov 10 09:35:30 CNC kernel: [ 0.000000] hpet clockevent registered Nov 10 09:35:30 CNC kernel: [ 0.000000] Fast TSC calibration failed Nov 10 09:35:30 CNC kernel: [ 0.008000] TSC: PIT calibration matches HPET. 1 loops Nov 10 09:35:30 CNC kernel: [ 0.008000] Detected 3592.676 MHz processor. Nov 10 09:35:30 CNC kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.35 BogoMIPS (lpj=14370704) Nov 10 09:35:30 CNC kernel: [ 0.000003] pid_max: default: 32768 minimum: 301 Nov 10 09:35:30 CNC kernel: [ 0.000023] Security Framework initialized Nov 10 09:35:30 CNC kernel: [ 0.000026] AppArmor: AppArmor disabled by boot time parameter Nov 10 09:35:30 CNC kernel: [ 0.000034] Mount-cache hash table entries: 512 Nov 10 09:35:30 CNC kernel: [ 0.000131] Initializing cgroup subsys cpuacct Nov 10 09:35:30 CNC kernel: [ 0.000132] Initializing cgroup subsys memory Nov 10 09:35:30 CNC kernel: [ 0.000135] Initializing cgroup subsys devices Nov 10 09:35:30 CNC kernel: [ 0.000136] Initializing cgroup subsys freezer Nov 10 09:35:30 CNC kernel: [ 0.000137] Initializing cgroup subsys net_cls Nov 10 09:35:30 CNC kernel: [ 0.000138] Initializing cgroup subsys blkio Nov 10 09:35:30 CNC kernel: [ 0.000141] Initializing cgroup subsys perf_event Nov 10 09:35:30 CNC kernel: [ 0.000155] CPU: Physical Processor ID: 0 Nov 10 09:35:30 CNC kernel: [ 0.000156] CPU: Processor Core ID: 0 Nov 10 09:35:30 CNC kernel: [ 0.005708] mce: CPU supports 23 MCE banks Nov 10 09:35:30 CNC kernel: [ 0.005732] LVT offset 1 assigned for vector 0xf9 Nov 10 09:35:30 CNC kernel: [ 0.005783] ACPI: Core revision 20120320 Nov 10 09:35:30 CNC kernel: [ 0.041267] Enabling APIC mode: Flat. Using 2 I/O APICs Nov 10 09:35:30 CNC kernel: [ 0.042081] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Nov 10 09:35:30 CNC kernel: [ 0.081763] CPU0: AMD Ryzen 7 1800X Eight-Core Processor stepping 01 Nov 10 09:35:30 CNC kernel: [ 0.189509] Performance Events: no PMU driver, software events only. Nov 10 09:35:30 CNC kernel: [ 0.201535] NMI watchdog: disabled (cpu0): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.213899] CPU 1 irqstacks, hard=f3cb6000 soft=f3cb8000 Nov 10 09:35:30 CNC kernel: [ 0.213901] Booting Node 0, Processors #1 Nov 10 09:35:30 CNC kernel: [ 0.223841] Initializing CPU#1 Nov 10 09:35:30 CNC kernel: [ 0.232505] NMI watchdog: disabled (cpu1): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.237545] CPU 2 irqstacks, hard=f3cc8000 soft=f3cca000 Nov 10 09:35:30 CNC kernel: [ 0.237547] #2 Nov 10 09:35:30 CNC kernel: [ 0.247485] Initializing CPU#2 Nov 10 09:35:30 CNC kernel: [ 0.256143] NMI watchdog: disabled (cpu2): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.261545] CPU 3 irqstacks, hard=f3cfc000 soft=f3cfe000 Nov 10 09:35:30 CNC kernel: [ 0.261546] #3 Nov 10 09:35:30 CNC kernel: [ 0.271487] Initializing CPU#3 Nov 10 09:35:30 CNC kernel: [ 0.280144] NMI watchdog: disabled (cpu3): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.285546] CPU 4 irqstacks, hard=f3d0e000 soft=f3d10000 Nov 10 09:35:30 CNC kernel: [ 0.285547] #4 Nov 10 09:35:30 CNC kernel: [ 0.295489] Initializing CPU#4 Nov 10 09:35:30 CNC kernel: [ 0.304144] NMI watchdog: disabled (cpu4): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.309546] CPU 5 irqstacks, hard=f3d20000 soft=f3d22000 Nov 10 09:35:30 CNC kernel: [ 0.309548] #5 Nov 10 09:35:30 CNC kernel: [ 0.319490] Initializing CPU#5 Nov 10 09:35:30 CNC kernel: [ 0.328145] NMI watchdog: disabled (cpu5): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.333547] CPU 6 irqstacks, hard=f3d34000 soft=f3d36000 Nov 10 09:35:30 CNC kernel: [ 0.333549] #6 Nov 10 09:35:30 CNC kernel: [ 0.343490] Initializing CPU#6 Nov 10 09:35:30 CNC kernel: [ 0.352146] NMI watchdog: disabled (cpu6): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.357548] CPU 7 irqstacks, hard=f3d62000 soft=f3d64000 Nov 10 09:35:30 CNC kernel: [ 0.357550] #7 Ok. Nov 10 09:35:30 CNC kernel: [ 0.367492] Initializing CPU#7 Nov 10 09:35:30 CNC kernel: [ 0.376146] NMI watchdog: disabled (cpu7): hardware events not enabled Nov 10 09:35:30 CNC kernel: [ 0.376161] Brought up 8 CPUs Nov 10 09:35:30 CNC kernel: [ 0.376162] Total of 8 processors activated (57482.81 BogoMIPS). Nov 10 09:35:30 CNC kernel: [ 0.377020] devtmpfs: initialized Nov 10 09:35:30 CNC kernel: [ 0.377153] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) Nov 10 09:35:30 CNC kernel: [ 0.377156] PM: Registering ACPI NVS region [mem 0xdb5e1000-0xdba91fff] (4919296 bytes) Nov 10 09:35:30 CNC kernel: [ 0.377285] dummy: Nov 10 09:35:30 CNC kernel: [ 0.377328] NET: Registered protocol family 16 Nov 10 09:35:30 CNC kernel: [ 0.377577] ACPI: bus type pci registered Nov 10 09:35:30 CNC kernel: [ 0.377609] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) Nov 10 09:35:30 CNC kernel: [ 0.377611] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 Nov 10 09:35:30 CNC kernel: [ 0.377612] PCI: Using MMCONFIG for extended config space Nov 10 09:35:30 CNC kernel: [ 0.377613] PCI: Using configuration type 1 for base access Nov 10 09:35:30 CNC kernel: [ 0.377739] mtrr: your CPUs had inconsistent variable MTRR settings Nov 10 09:35:30 CNC kernel: [ 0.377740] mtrr: probably your BIOS does not setup all CPUs. Nov 10 09:35:30 CNC kernel: [ 0.377740] mtrr: corrected configuration. Nov 10 09:35:30 CNC kernel: [ 0.378043] bio: create slab <bio-0> at 0 Nov 10 09:35:30 CNC kernel: [ 0.378120] ACPI: Added _OSI(Module Device) Nov 10 09:35:30 CNC kernel: [ 0.378121] ACPI: Added _OSI(Processor Device) Nov 10 09:35:30 CNC kernel: [ 0.378122] ACPI: Added _OSI(3.0 _SCP Extensions) Nov 10 09:35:30 CNC kernel: [ 0.378123] ACPI: Added _OSI(Processor Aggregator Device) Nov 10 09:35:30 CNC kernel: [ 0.379878] ACPI: EC: Look up EC in DSDT Nov 10 09:35:30 CNC kernel: [ 0.381582] ACPI: Executed 2 blocks of module-level executable AML code Nov 10 09:35:30 CNC kernel: [ 0.386470] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Nov 10 09:35:30 CNC kernel: [ 0.388521] ACPI: Interpreter enabled Nov 10 09:35:30 CNC kernel: [ 0.388527] ACPI: (supports S0 S3 S4 S5) Nov 10 09:35:30 CNC kernel: [ 0.388540] ACPI: Using IOAPIC for interrupt routing Nov 10 09:35:30 CNC kernel: [ 0.393490] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62 Nov 10 09:35:30 CNC kernel: [ 0.393657] ACPI: No dock devices found. Nov 10 09:35:30 CNC kernel: [ 0.393660] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Nov 10 09:35:30 CNC kernel: [ 0.393875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Nov 10 09:35:30 CNC kernel: [ 0.394130] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] Nov 10 09:35:30 CNC kernel: [ 0.394132] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] Nov 10 09:35:30 CNC kernel: [ 0.394134] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] Nov 10 09:35:30 CNC kernel: [ 0.394135] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.394137] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Nov 10 09:35:30 CNC kernel: [ 0.394138] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] Nov 10 09:35:30 CNC kernel: [ 0.394140] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfec2ffff] Nov 10 09:35:30 CNC kernel: [ 0.394141] pci_root PNP0A08:00: host bridge window [mem 0xfee00000-0xffffffff] Nov 10 09:35:30 CNC kernel: [ 0.394162] PCI host bridge to bus 0000:00 Nov 10 09:35:30 CNC kernel: [ 0.394163] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] Nov 10 09:35:30 CNC kernel: [ 0.394164] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] Nov 10 09:35:30 CNC kernel: [ 0.394166] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] Nov 10 09:35:30 CNC kernel: [ 0.394167] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.394169] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Nov 10 09:35:30 CNC kernel: [ 0.394170] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] Nov 10 09:35:30 CNC kernel: [ 0.394172] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff] Nov 10 09:35:30 CNC kernel: [ 0.394174] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff] Nov 10 09:35:30 CNC kernel: [ 0.394181] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394208] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 Nov 10 09:35:30 CNC kernel: [ 0.394265] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394291] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.394351] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.394386] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394420] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394443] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.394509] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.394552] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394591] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.394611] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.395076] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.395115] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395135] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.395191] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.395265] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 Nov 10 09:35:30 CNC kernel: [ 0.395422] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 Nov 10 09:35:30 CNC kernel: [ 0.395584] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395596] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395608] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395620] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395633] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395645] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395658] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.395670] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 Nov 10 09:35:30 CNC kernel: [ 0.396084] pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330 Nov 10 09:35:30 CNC kernel: [ 0.396097] pci 0000:01:00.0: reg 10: [mem 0xf75a0000-0xf75a7fff 64bit] Nov 10 09:35:30 CNC kernel: [ 0.396148] pci 0000:01:00.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.396174] pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601 Nov 10 09:35:30 CNC kernel: [ 0.396213] pci 0000:01:00.1: reg 24: [mem 0xf7580000-0xf759ffff] Nov 10 09:35:30 CNC kernel: [ 0.396221] pci 0000:01:00.1: reg 30: [mem 0xf7500000-0xf757ffff pref] Nov 10 09:35:30 CNC kernel: [ 0.396242] pci 0000:01:00.1: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.396265] pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.396316] pci 0000:01:00.2: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.401547] pci 0000:00:01.3: PCI bridge to [bus 01-09] Nov 10 09:35:30 CNC kernel: [ 0.401551] pci 0000:00:01.3: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.401554] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff] Nov 10 09:35:30 CNC kernel: [ 0.401608] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.401666] pci 0000:02:00.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.401698] pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.401755] pci 0000:02:02.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.401783] pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.401840] pci 0000:02:03.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.401868] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.401923] pci 0000:02:04.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.401952] pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.402007] pci 0000:02:05.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.402037] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.402092] pci 0000:02:06.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.402123] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:35:30 CNC kernel: [ 0.402177] pci 0000:02:07.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.402218] pci 0000:01:00.2: PCI bridge to [bus 02-09] Nov 10 09:35:30 CNC kernel: [ 0.402222] pci 0000:01:00.2: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.402225] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.402306] pci 0000:03:00.0: [1b21:1343] type 00 class 0x0c0330 Nov 10 09:35:30 CNC kernel: [ 0.402330] pci 0000:03:00.0: reg 10: [mem 0xf7400000-0xf7407fff 64bit] Nov 10 09:35:30 CNC kernel: [ 0.402464] pci 0000:03:00.0: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.409550] pci 0000:02:00.0: PCI bridge to [bus 03-03] Nov 10 09:35:30 CNC kernel: [ 0.409559] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.409638] pci 0000:04:00.0: [8086:1539] type 00 class 0x020000 Nov 10 09:35:30 CNC kernel: [ 0.409664] pci 0000:04:00.0: reg 10: [mem 0xf7300000-0xf731ffff] Nov 10 09:35:30 CNC kernel: [ 0.409697] pci 0000:04:00.0: reg 18: [io 0xe000-0xe01f] Nov 10 09:35:30 CNC kernel: [ 0.409714] pci 0000:04:00.0: reg 1c: [mem 0xf7320000-0xf7323fff] Nov 10 09:35:30 CNC kernel: [ 0.409822] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.417553] pci 0000:02:02.0: PCI bridge to [bus 04-04] Nov 10 09:35:30 CNC kernel: [ 0.417560] pci 0000:02:02.0: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.417563] pci 0000:02:02.0: bridge window [mem 0xf7300000-0xf73fffff] Nov 10 09:35:30 CNC kernel: [ 0.417611] pci 0000:02:03.0: PCI bridge to [bus 05-05] Nov 10 09:35:30 CNC kernel: [ 0.417662] pci 0000:02:04.0: PCI bridge to [bus 06-06] Nov 10 09:35:30 CNC kernel: [ 0.417714] pci 0000:02:05.0: PCI bridge to [bus 07-07] Nov 10 09:35:30 CNC kernel: [ 0.417765] pci 0000:02:06.0: PCI bridge to [bus 08-08] Nov 10 09:35:30 CNC kernel: [ 0.417844] pci 0000:09:00.0: [544d:6178] type 00 class 0x048000 Nov 10 09:35:30 CNC kernel: [ 0.417867] pci 0000:09:00.0: reg 10: [mem 0xf7200000-0xf723ffff] Nov 10 09:35:30 CNC kernel: [ 0.425553] pci 0000:02:07.0: PCI bridge to [bus 09-09] Nov 10 09:35:30 CNC kernel: [ 0.425562] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff] Nov 10 09:35:30 CNC kernel: [ 0.425692] pci 0000:0a:00.0: [10de:13c2] type 00 class 0x030000 Nov 10 09:35:30 CNC kernel: [ 0.425706] pci 0000:0a:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] Nov 10 09:35:30 CNC kernel: [ 0.425720] pci 0000:0a:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Nov 10 09:35:30 CNC kernel: [ 0.425734] pci 0000:0a:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref] Nov 10 09:35:30 CNC kernel: [ 0.425743] pci 0000:0a:00.0: reg 24: [io 0xd000-0xd07f] Nov 10 09:35:30 CNC kernel: [ 0.425752] pci 0000:0a:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref] Nov 10 09:35:30 CNC kernel: [ 0.425816] pci 0000:0a:00.1: [10de:0fbb] type 00 class 0x040300 Nov 10 09:35:30 CNC kernel: [ 0.425828] pci 0000:0a:00.1: reg 10: [mem 0xf7080000-0xf7083fff] Nov 10 09:35:30 CNC kernel: [ 0.433553] pci 0000:00:03.1: PCI bridge to [bus 0a-0a] Nov 10 09:35:30 CNC kernel: [ 0.433559] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff] Nov 10 09:35:30 CNC kernel: [ 0.433562] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] Nov 10 09:35:30 CNC kernel: [ 0.433566] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:35:30 CNC kernel: [ 0.433646] pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000 Nov 10 09:35:30 CNC kernel: [ 0.433700] pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000 Nov 10 09:35:30 CNC kernel: [ 0.433713] pci 0000:0b:00.2: reg 18: [mem 0xf7700000-0xf77fffff] Nov 10 09:35:30 CNC kernel: [ 0.433724] pci 0000:0b:00.2: reg 24: [mem 0xf7800000-0xf7801fff] Nov 10 09:35:30 CNC kernel: [ 0.433757] pci 0000:0b:00.3: [1022:145c] type 00 class 0x0c0330 Nov 10 09:35:30 CNC kernel: [ 0.433765] pci 0000:0b:00.3: reg 10: [mem 0xf7600000-0xf76fffff 64bit] Nov 10 09:35:30 CNC kernel: [ 0.433796] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.433817] pci 0000:00:07.1: PCI bridge to [bus 0b-0b] Nov 10 09:35:30 CNC kernel: [ 0.433821] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff] Nov 10 09:35:30 CNC kernel: [ 0.434176] pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000 Nov 10 09:35:30 CNC kernel: [ 0.434228] pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601 Nov 10 09:35:30 CNC kernel: [ 0.434251] pci 0000:0c:00.2: reg 24: [mem 0xf7908000-0xf7908fff] Nov 10 09:35:30 CNC kernel: [ 0.434269] pci 0000:0c:00.2: PME# supported from D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.434285] pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300 Nov 10 09:35:30 CNC kernel: [ 0.434291] pci 0000:0c:00.3: reg 10: [mem 0xf7900000-0xf7907fff] Nov 10 09:35:30 CNC kernel: [ 0.434325] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold Nov 10 09:35:30 CNC kernel: [ 0.434346] pci 0000:00:08.1: PCI bridge to [bus 0c-0c] Nov 10 09:35:30 CNC kernel: [ 0.434350] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff] Nov 10 09:35:30 CNC kernel: [ 0.434361] pci_bus 0000:00: on NUMA node 0 Nov 10 09:35:30 CNC kernel: [ 0.434363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 10 09:35:30 CNC kernel: [ 0.434432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP8._PRT] Nov 10 09:35:30 CNC kernel: [ 0.434463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP17._PRT] Nov 10 09:35:30 CNC kernel: [ 0.434488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP18._PRT] Nov 10 09:35:30 CNC kernel: [ 0.434520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP2._PRT] Nov 10 09:35:30 CNC kernel: [ 0.434658] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) Nov 10 09:35:30 CNC kernel: [ 0.438535] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438570] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438599] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438638] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438671] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438698] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438724] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438750] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:35:30 CNC kernel: [ 0.438806] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none Nov 10 09:35:30 CNC kernel: [ 0.438808] vgaarb: loaded Nov 10 09:35:30 CNC kernel: [ 0.438809] vgaarb: bridge control possible 0000:0a:00.0 Nov 10 09:35:30 CNC kernel: [ 0.438823] PCI: Using ACPI for IRQ routing Nov 10 09:35:30 CNC kernel: [ 0.442890] PCI: pci_cache_line_size set to 64 bytes Nov 10 09:35:30 CNC kernel: [ 0.442974] reserve RAM buffer: 000000000009d400 - 000000000009ffff Nov 10 09:35:30 CNC kernel: [ 0.442975] reserve RAM buffer: 0000000009d00000 - 000000000bffffff Nov 10 09:35:30 CNC kernel: [ 0.442976] reserve RAM buffer: 000000000b000000 - 000000000bffffff Nov 10 09:35:30 CNC kernel: [ 0.442978] reserve RAM buffer: 00000000da0c4000 - 00000000dbffffff Nov 10 09:35:30 CNC kernel: [ 0.442979] reserve RAM buffer: 00000000df000000 - 00000000dfffffff Nov 10 09:35:30 CNC kernel: [ 0.443051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Nov 10 09:35:30 CNC kernel: [ 0.443053] hpet0: 3 comparators, 32-bit 14.318180 MHz counter Nov 10 09:35:30 CNC kernel: [ 0.445082] Switching to clocksource hpet Nov 10 09:35:30 CNC kernel: [ 0.445366] pnp: PnP ACPI init Nov 10 09:35:30 CNC kernel: [ 0.445371] ACPI: bus type pnp registered Nov 10 09:35:30 CNC kernel: [ 0.445509] pnp 00:00: [bus 00-ff] Nov 10 09:35:30 CNC kernel: [ 0.445510] pnp 00:00: [io 0x0cf8-0x0cff] Nov 10 09:35:30 CNC kernel: [ 0.445512] pnp 00:00: [io 0x0000-0x03af window] Nov 10 09:35:30 CNC kernel: [ 0.445513] pnp 00:00: [io 0x03e0-0x0cf7 window] Nov 10 09:35:30 CNC kernel: [ 0.445514] pnp 00:00: [io 0x03b0-0x03df window] Nov 10 09:35:30 CNC kernel: [ 0.445515] pnp 00:00: [io 0x0d00-0xefff window] Nov 10 09:35:30 CNC kernel: [ 0.445516] pnp 00:00: [mem 0x000a0000-0x000bffff window] Nov 10 09:35:30 CNC kernel: [ 0.445517] pnp 00:00: [mem 0x000c0000-0x000dffff window] Nov 10 09:35:30 CNC kernel: [ 0.445531] pnp 00:00: [mem 0xe0000000-0xfec2ffff window] Nov 10 09:35:30 CNC kernel: [ 0.445532] pnp 00:00: [mem 0xfee00000-0xffffffff window] Nov 10 09:35:30 CNC kernel: [ 0.445533] pnp 00:00: [mem 0x00000000 window] Nov 10 09:35:30 CNC kernel: [ 0.445562] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Nov 10 09:35:30 CNC kernel: [ 0.445584] pnp 00:01: [mem 0xf8000000-0xfbffffff] Nov 10 09:35:30 CNC kernel: [ 0.445609] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445611] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Nov 10 09:35:30 CNC kernel: [ 0.445646] pnp 00:02: [mem 0xfeb80000-0xfebfffff] Nov 10 09:35:30 CNC kernel: [ 0.445669] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445670] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:35:30 CNC kernel: [ 0.445731] pnp 00:03: [mem 0xfd800000-0xfdffffff] Nov 10 09:35:30 CNC kernel: [ 0.445732] pnp 00:03: [mem 0x00000000-0xffffffff disabled] Nov 10 09:35:30 CNC kernel: [ 0.445761] system 00:03: [mem 0xfd800000-0xfdffffff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445762] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:35:30 CNC kernel: [ 0.445774] pnp 00:04: [dma 4] Nov 10 09:35:30 CNC kernel: [ 0.445775] pnp 00:04: [io 0x0000-0x000f] Nov 10 09:35:30 CNC kernel: [ 0.445776] pnp 00:04: [io 0x0081-0x0083] Nov 10 09:35:30 CNC kernel: [ 0.445777] pnp 00:04: [io 0x0087] Nov 10 09:35:30 CNC kernel: [ 0.445778] pnp 00:04: [io 0x0089-0x008b] Nov 10 09:35:30 CNC kernel: [ 0.445779] pnp 00:04: [io 0x008f] Nov 10 09:35:30 CNC kernel: [ 0.445780] pnp 00:04: [io 0x00c0-0x00df] Nov 10 09:35:30 CNC kernel: [ 0.445797] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) Nov 10 09:35:30 CNC kernel: [ 0.445814] pnp 00:05: [io 0x0070-0x0071] Nov 10 09:35:30 CNC kernel: [ 0.445831] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) Nov 10 09:35:30 CNC kernel: [ 0.445836] pnp 00:06: [io 0x0061] Nov 10 09:35:30 CNC kernel: [ 0.445852] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) Nov 10 09:35:30 CNC kernel: [ 0.445932] pnp 00:07: [io 0x0000-0xffffffff disabled] Nov 10 09:35:30 CNC kernel: [ 0.445933] pnp 00:07: [io 0x02a0-0x02af] Nov 10 09:35:30 CNC kernel: [ 0.445934] pnp 00:07: [io 0x0230-0x023f] Nov 10 09:35:30 CNC kernel: [ 0.445935] pnp 00:07: [io 0x0290-0x029f] Nov 10 09:35:30 CNC kernel: [ 0.445966] system 00:07: [io 0x02a0-0x02af] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445967] system 00:07: [io 0x0230-0x023f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445969] system 00:07: [io 0x0290-0x029f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.445970] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:35:30 CNC kernel: [ 0.446088] pnp 00:08: [io 0x0010-0x001f] Nov 10 09:35:30 CNC kernel: [ 0.446090] pnp 00:08: [io 0x0022-0x003f] Nov 10 09:35:30 CNC kernel: [ 0.446091] pnp 00:08: [io 0x0063] Nov 10 09:35:30 CNC kernel: [ 0.446091] pnp 00:08: [io 0x0065] Nov 10 09:35:30 CNC kernel: [ 0.446092] pnp 00:08: [io 0x0067-0x006f] Nov 10 09:35:30 CNC kernel: [ 0.446093] pnp 00:08: [io 0x0072-0x007f] Nov 10 09:35:30 CNC kernel: [ 0.446094] pnp 00:08: [io 0x0080] Nov 10 09:35:30 CNC kernel: [ 0.446095] pnp 00:08: [io 0x0084-0x0086] Nov 10 09:35:30 CNC kernel: [ 0.446096] pnp 00:08: [io 0x0088] Nov 10 09:35:30 CNC kernel: [ 0.446097] pnp 00:08: [io 0x008c-0x008e] Nov 10 09:35:30 CNC kernel: [ 0.446098] pnp 00:08: [io 0x0090-0x009f] Nov 10 09:35:30 CNC kernel: [ 0.446099] pnp 00:08: [io 0x00a2-0x00bf] Nov 10 09:35:30 CNC kernel: [ 0.446100] pnp 00:08: [io 0x00b1] Nov 10 09:35:30 CNC kernel: [ 0.446101] pnp 00:08: [io 0x00e0-0x00ef] Nov 10 09:35:30 CNC kernel: [ 0.446102] pnp 00:08: [io 0x04d0-0x04d1] Nov 10 09:35:30 CNC kernel: [ 0.446103] pnp 00:08: [io 0x040b] Nov 10 09:35:30 CNC kernel: [ 0.446104] pnp 00:08: [io 0x04d6] Nov 10 09:35:30 CNC kernel: [ 0.446105] pnp 00:08: [io 0x0c00-0x0c01] Nov 10 09:35:30 CNC kernel: [ 0.446106] pnp 00:08: [io 0x0c14] Nov 10 09:35:30 CNC kernel: [ 0.446107] pnp 00:08: [io 0x0c50-0x0c51] Nov 10 09:35:30 CNC kernel: [ 0.446108] pnp 00:08: [io 0x0c52] Nov 10 09:35:30 CNC kernel: [ 0.446109] pnp 00:08: [io 0x0c6c] Nov 10 09:35:30 CNC kernel: [ 0.446110] pnp 00:08: [io 0x0c6f] Nov 10 09:35:30 CNC kernel: [ 0.446111] pnp 00:08: [io 0x0cd0-0x0cd1] Nov 10 09:35:30 CNC kernel: [ 0.446112] pnp 00:08: [io 0x0cd2-0x0cd3] Nov 10 09:35:30 CNC kernel: [ 0.446114] pnp 00:08: [io 0x0cd4-0x0cd5] Nov 10 09:35:30 CNC kernel: [ 0.446115] pnp 00:08: [io 0x0cd6-0x0cd7] Nov 10 09:35:30 CNC kernel: [ 0.446116] pnp 00:08: [io 0x0cd8-0x0cdf] Nov 10 09:35:30 CNC kernel: [ 0.446117] pnp 00:08: [io 0x0800-0x089f] Nov 10 09:35:30 CNC kernel: [ 0.446118] pnp 00:08: [io 0x0b00-0x0b0f] Nov 10 09:35:30 CNC kernel: [ 0.446119] pnp 00:08: [io 0x0b20-0x0b3f] Nov 10 09:35:30 CNC kernel: [ 0.446120] pnp 00:08: [io 0x0900-0x090f] Nov 10 09:35:30 CNC kernel: [ 0.446121] pnp 00:08: [io 0x0910-0x091f] Nov 10 09:35:30 CNC kernel: [ 0.446122] pnp 00:08: [io 0x0060-0x005f disabled] Nov 10 09:35:30 CNC kernel: [ 0.446123] pnp 00:08: [io 0x0064-0x0063 disabled] Nov 10 09:35:30 CNC kernel: [ 0.446125] pnp 00:08: [mem 0xfec00000-0xfec00fff] Nov 10 09:35:30 CNC kernel: [ 0.446126] pnp 00:08: [mem 0xfec01000-0xfec01fff] Nov 10 09:35:30 CNC kernel: [ 0.446127] pnp 00:08: [mem 0xfedc0000-0xfedc0fff] Nov 10 09:35:30 CNC kernel: [ 0.446128] pnp 00:08: [mem 0xfee00000-0xfee00fff] Nov 10 09:35:30 CNC kernel: [ 0.446129] pnp 00:08: [mem 0xfed80000-0xfed8ffff] Nov 10 09:35:30 CNC kernel: [ 0.446131] pnp 00:08: [mem 0xfec10000-0xfec10fff] Nov 10 09:35:30 CNC kernel: [ 0.446132] pnp 00:08: [mem 0x00000000-0xffffffff disabled] Nov 10 09:35:30 CNC kernel: [ 0.446133] pnp 00:08: [mem 0xff000000-0xffffffff] Nov 10 09:35:30 CNC kernel: [ 0.446196] system 00:08: [io 0x04d0-0x04d1] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446197] system 00:08: [io 0x040b] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446199] system 00:08: [io 0x04d6] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446200] system 00:08: [io 0x0c00-0x0c01] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446202] system 00:08: [io 0x0c14] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446203] system 00:08: [io 0x0c50-0x0c51] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446205] system 00:08: [io 0x0c52] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446206] system 00:08: [io 0x0c6c] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446208] system 00:08: [io 0x0c6f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446209] system 00:08: [io 0x0cd0-0x0cd1] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446210] system 00:08: [io 0x0cd2-0x0cd3] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446212] system 00:08: [io 0x0cd4-0x0cd5] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446213] system 00:08: [io 0x0cd6-0x0cd7] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446215] system 00:08: [io 0x0cd8-0x0cdf] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446216] system 00:08: [io 0x0800-0x089f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446218] system 00:08: [io 0x0b00-0x0b0f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446219] system 00:08: [io 0x0b20-0x0b3f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446221] system 00:08: [io 0x0900-0x090f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446222] system 00:08: [io 0x0910-0x091f] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446224] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved Nov 10 09:35:30 CNC kernel: [ 0.446226] system 00:08: [mem 0xfec01000-0xfec01fff] could not be reserved Nov 10 09:35:30 CNC kernel: [ 0.446228] system 00:08: [mem 0xfedc0000-0xfedc0fff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446229] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446231] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446232] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446234] system 00:08: [mem 0xff000000-0xffffffff] has been reserved Nov 10 09:35:30 CNC kernel: [ 0.446236] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:35:30 CNC kernel: [ 0.446552] pnp 00:09: [irq 0 disabled] Nov 10 09:35:30 CNC kernel: [ 0.446559] pnp 00:09: [irq 8] Nov 10 09:35:30 CNC kernel: [ 0.446560] pnp 00:09: [mem 0xfed00000-0xfed003ff] Nov 10 09:35:30 CNC kernel: [ 0.446585] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) Nov 10 09:35:30 CNC kernel: [ 0.446590] pnp: PnP ACPI: found 10 devices Nov 10 09:35:30 CNC kernel: [ 0.446591] ACPI: ACPI bus type pnp unregistered Nov 10 09:35:30 CNC kernel: [ 0.446592] PnPBIOS: Disabled by ACPI PNP Nov 10 09:35:30 CNC kernel: [ 0.482439] pci 0000:02:00.0: PCI bridge to [bus 03-03] Nov 10 09:35:30 CNC kernel: [ 0.482443] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.482450] pci 0000:02:02.0: PCI bridge to [bus 04-04] Nov 10 09:35:30 CNC kernel: [ 0.482452] pci 0000:02:02.0: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482455] pci 0000:02:02.0: bridge window [mem 0xf7300000-0xf73fffff] Nov 10 09:35:30 CNC kernel: [ 0.482462] pci 0000:02:03.0: PCI bridge to [bus 05-05] Nov 10 09:35:30 CNC kernel: [ 0.482471] pci 0000:02:04.0: PCI bridge to [bus 06-06] Nov 10 09:35:30 CNC kernel: [ 0.482480] pci 0000:02:05.0: PCI bridge to [bus 07-07] Nov 10 09:35:30 CNC kernel: [ 0.482489] pci 0000:02:06.0: PCI bridge to [bus 08-08] Nov 10 09:35:30 CNC kernel: [ 0.482498] pci 0000:02:07.0: PCI bridge to [bus 09-09] Nov 10 09:35:30 CNC kernel: [ 0.482501] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff] Nov 10 09:35:30 CNC kernel: [ 0.482508] pci 0000:01:00.2: PCI bridge to [bus 02-09] Nov 10 09:35:30 CNC kernel: [ 0.482509] pci 0000:01:00.2: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482513] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.482519] pci 0000:00:01.3: PCI bridge to [bus 01-09] Nov 10 09:35:30 CNC kernel: [ 0.482520] pci 0000:00:01.3: bridge window [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482523] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff] Nov 10 09:35:30 CNC kernel: [ 0.482526] pci 0000:00:03.1: PCI bridge to [bus 0a-0a] Nov 10 09:35:30 CNC kernel: [ 0.482528] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff] Nov 10 09:35:30 CNC kernel: [ 0.482531] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] Nov 10 09:35:30 CNC kernel: [ 0.482533] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:35:30 CNC kernel: [ 0.482537] pci 0000:00:07.1: PCI bridge to [bus 0b-0b] Nov 10 09:35:30 CNC kernel: [ 0.482539] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff] Nov 10 09:35:30 CNC kernel: [ 0.482543] pci 0000:00:08.1: PCI bridge to [bus 0c-0c] Nov 10 09:35:30 CNC kernel: [ 0.482545] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff] Nov 10 09:35:30 CNC kernel: [ 0.482614] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] Nov 10 09:35:30 CNC kernel: [ 0.482615] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] Nov 10 09:35:30 CNC kernel: [ 0.482616] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] Nov 10 09:35:30 CNC kernel: [ 0.482617] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482618] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] Nov 10 09:35:30 CNC kernel: [ 0.482619] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] Nov 10 09:35:30 CNC kernel: [ 0.482620] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff] Nov 10 09:35:30 CNC kernel: [ 0.482621] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff] Nov 10 09:35:30 CNC kernel: [ 0.482622] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482623] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf75fffff] Nov 10 09:35:30 CNC kernel: [ 0.482625] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482626] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.482627] pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf74fffff] Nov 10 09:35:30 CNC kernel: [ 0.482628] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] Nov 10 09:35:30 CNC kernel: [ 0.482629] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff] Nov 10 09:35:30 CNC kernel: [ 0.482630] pci_bus 0000:09: resource 1 [mem 0xf7200000-0xf72fffff] Nov 10 09:35:30 CNC kernel: [ 0.482631] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] Nov 10 09:35:30 CNC kernel: [ 0.482632] pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff] Nov 10 09:35:30 CNC kernel: [ 0.482633] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:35:30 CNC kernel: [ 0.482634] pci_bus 0000:0b: resource 1 [mem 0xf7600000-0xf78fffff] Nov 10 09:35:30 CNC kernel: [ 0.482635] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf79fffff] Nov 10 09:35:30 CNC kernel: [ 0.482837] NET: Registered protocol family 2 Nov 10 09:35:30 CNC kernel: [ 0.482878] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 10 09:35:30 CNC kernel: [ 0.482995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Nov 10 09:35:30 CNC kernel: [ 0.483109] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Nov 10 09:35:30 CNC kernel: [ 0.483166] TCP: Hash tables configured (established 131072 bind 65536) Nov 10 09:35:30 CNC kernel: [ 0.483167] TCP: reno registered Nov 10 09:35:30 CNC kernel: [ 0.483168] UDP hash table entries: 512 (order: 2, 16384 bytes) Nov 10 09:35:30 CNC kernel: [ 0.483171] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Nov 10 09:35:30 CNC kernel: [ 0.483233] NET: Registered protocol family 1 Nov 10 09:35:30 CNC kernel: [ 0.483331] pci 0000:0a:00.0: Boot video device Nov 10 09:35:30 CNC kernel: [ 0.483476] PCI: CLS 64 bytes, default 64 Nov 10 09:35:30 CNC kernel: [ 0.483497] Unpacking initramfs... Nov 10 09:35:30 CNC kernel: [ 0.641058] Freeing initrd memory: 14256k freed Nov 10 09:35:30 CNC kernel: [ 0.643495] audit: initializing netlink socket (disabled) Nov 10 09:35:30 CNC kernel: [ 0.643507] type=2000 audit(1541842501.512:1): initialized Nov 10 09:35:30 CNC kernel: [ 0.651108] highmem bounce pool size: 64 pages Nov 10 09:35:30 CNC kernel: [ 0.651111] HugeTLB registered 4 MB page size, pre-allocated 0 pages Nov 10 09:35:30 CNC kernel: [ 0.651353] VFS: Disk quotas dquot_6.5.2 Nov 10 09:35:30 CNC kernel: [ 0.651379] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 10 09:35:30 CNC kernel: [ 0.651426] msgmni has been set to 1684 Nov 10 09:35:30 CNC kernel: [ 0.651547] alg: No test for stdrng (krng) Nov 10 09:35:30 CNC kernel: [ 0.651572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Nov 10 09:35:30 CNC kernel: [ 0.651574] io scheduler noop registered Nov 10 09:35:30 CNC kernel: [ 0.651575] io scheduler deadline registered Nov 10 09:35:30 CNC kernel: [ 0.651603] io scheduler cfq registered (default) Nov 10 09:35:30 CNC kernel: [ 0.652128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Nov 10 09:35:30 CNC kernel: [ 0.652136] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Nov 10 09:35:30 CNC kernel: [ 0.652138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Nov 10 09:35:30 CNC kernel: [ 0.652508] GHES: HEST is not enabled! Nov 10 09:35:30 CNC kernel: [ 0.652513] isapnp: Scanning for PnP cards... Nov 10 09:35:30 CNC kernel: [ 1.006482] isapnp: No Plug & Play device found Nov 10 09:35:30 CNC kernel: [ 1.006522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Nov 10 09:35:30 CNC kernel: [ 1.027276] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 10 09:35:30 CNC kernel: [ 1.027623] Linux agpgart interface v0.103 Nov 10 09:35:30 CNC kernel: [ 1.027723] i8042: PNP: No PS/2 controller found. Probing ports directly. Nov 10 09:35:30 CNC kernel: [ 1.028194] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 10 09:35:30 CNC kernel: [ 1.028202] serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 10 09:35:30 CNC kernel: [ 1.028423] mousedev: PS/2 mouse device common for all mice Nov 10 09:35:30 CNC kernel: [ 1.028482] rtc_cmos 00:05: RTC can wake from S4 Nov 10 09:35:30 CNC kernel: [ 1.028670] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Nov 10 09:35:30 CNC kernel: [ 1.028724] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Nov 10 09:35:30 CNC kernel: [ 1.028807] TCP: cubic registered Nov 10 09:35:30 CNC kernel: [ 1.028887] NET: Registered protocol family 10 Nov 10 09:35:30 CNC kernel: [ 1.029025] Mobile IPv6 Nov 10 09:35:30 CNC kernel: [ 1.029026] NET: Registered protocol family 17 Nov 10 09:35:30 CNC kernel: [ 1.029028] Registering the dns_resolver key type Nov 10 09:35:30 CNC kernel: [ 1.029052] Using IPI No-Shortcut mode Nov 10 09:35:30 CNC kernel: [ 1.029121] PM: Hibernation image not present or could not be loaded. Nov 10 09:35:30 CNC kernel: [ 1.029126] registered taskstats version 1 Nov 10 09:35:30 CNC kernel: [ 1.029850] rtc_cmos 00:05: setting system clock to 2018-11-10 09:35:02 UTC (1541842502) Nov 10 09:35:30 CNC kernel: [ 1.029937] Freeing unused kernel memory: 416k freed Nov 10 09:35:30 CNC kernel: [ 1.030027] Write protecting the kernel text: 3496k Nov 10 09:35:30 CNC kernel: [ 1.030044] Write protecting the kernel read-only data: 984k Nov 10 09:35:30 CNC kernel: [ 1.045528] usbcore: registered new interface driver usbfs Nov 10 09:35:30 CNC kernel: [ 1.045545] usbcore: registered new interface driver hub Nov 10 09:35:30 CNC kernel: [ 1.046186] usbcore: registered new device driver usb Nov 10 09:35:30 CNC kernel: [ 1.046559] xhci_hcd 0000:01:00.0: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.046575] SCSI subsystem initialized Nov 10 09:35:30 CNC kernel: [ 1.046577] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Nov 10 09:35:30 CNC kernel: [ 1.047325] libata version 3.00 loaded. Nov 10 09:35:30 CNC kernel: [ 1.057085] microcode: CPU0: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.064008] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.064098] microcode: CPU1: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.064992] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.065078] microcode: CPU2: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.066418] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.066502] microcode: CPU3: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.067417] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.067504] microcode: CPU4: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.068649] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.068740] microcode: CPU5: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.069697] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.069796] microcode: CPU6: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.070728] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.070825] microcode: CPU7: patch_level=0x08001129 Nov 10 09:35:30 CNC kernel: [ 1.071745] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:35:30 CNC kernel: [ 1.071856] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba Nov 10 09:35:30 CNC kernel: [ 1.101965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:35:30 CNC kernel: [ 1.101967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.101968] usb usb1: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.101969] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.101970] usb usb1: SerialNumber: 0000:01:00.0 Nov 10 09:35:30 CNC kernel: [ 1.102147] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.102149] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.102164] hub 1-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.102177] hub 1-0:1.0: 14 ports detected Nov 10 09:35:30 CNC kernel: [ 1.102261] xhci_hcd 0000:01:00.0: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.102264] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Nov 10 09:35:30 CNC kernel: [ 1.102288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:35:30 CNC kernel: [ 1.102289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.102290] usb usb2: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.102291] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.102292] usb usb2: SerialNumber: 0000:01:00.0 Nov 10 09:35:30 CNC kernel: [ 1.102338] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.102339] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.102353] hub 2-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.102361] hub 2-0:1.0: 8 ports detected Nov 10 09:35:30 CNC kernel: [ 1.102460] ahci 0000:01:00.1: version 3.0 Nov 10 09:35:30 CNC kernel: [ 1.102481] xhci_hcd 0000:03:00.0: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.102488] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 Nov 10 09:35:30 CNC kernel: [ 1.102515] ahci: SSS flag set, parallel bus scan disabled Nov 10 09:35:30 CNC kernel: [ 1.102562] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode Nov 10 09:35:30 CNC kernel: [ 1.102565] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs apst Nov 10 09:35:30 CNC kernel: [ 1.103263] scsi0 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103373] scsi1 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103441] scsi2 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103506] scsi3 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103586] scsi4 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103638] scsi5 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103691] scsi6 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103739] scsi7 : ahci Nov 10 09:35:30 CNC kernel: [ 1.103778] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103781] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103783] ata3: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580200 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103785] ata4: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580280 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103788] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103790] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103792] ata7: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580400 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103794] ata8: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580480 irq 33 Nov 10 09:35:30 CNC kernel: [ 1.103861] ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Nov 10 09:35:30 CNC kernel: [ 1.103863] ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Nov 10 09:35:30 CNC kernel: [ 1.103974] scsi8 : ahci Nov 10 09:35:30 CNC kernel: [ 1.104017] ata9: SATA max UDMA/133 abar m4096@0xf7908000 port 0xf7908100 irq 42 Nov 10 09:35:30 CNC kernel: [ 1.161450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:35:30 CNC kernel: [ 1.161452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.161453] usb usb3: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.161454] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.161455] usb usb3: SerialNumber: 0000:03:00.0 Nov 10 09:35:30 CNC kernel: [ 1.161512] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.161513] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.161526] hub 3-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.161531] hub 3-0:1.0: 2 ports detected Nov 10 09:35:30 CNC kernel: [ 1.161569] xhci_hcd 0000:03:00.0: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.161572] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 Nov 10 09:35:30 CNC kernel: [ 1.161597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:35:30 CNC kernel: [ 1.161598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.161599] usb usb4: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.161600] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.161601] usb usb4: SerialNumber: 0000:03:00.0 Nov 10 09:35:30 CNC kernel: [ 1.161645] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.161646] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.161659] hub 4-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.161664] hub 4-0:1.0: 2 ports detected Nov 10 09:35:30 CNC kernel: [ 1.165514] xhci_hcd 0000:0b:00.3: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.165519] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5 Nov 10 09:35:30 CNC kernel: [ 1.165640] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:35:30 CNC kernel: [ 1.165642] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.165643] usb usb5: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.165644] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.165645] usb usb5: SerialNumber: 0000:0b:00.3 Nov 10 09:35:30 CNC kernel: [ 1.165695] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.165696] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.165711] hub 5-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.165715] hub 5-0:1.0: 4 ports detected Nov 10 09:35:30 CNC kernel: [ 1.165767] xhci_hcd 0000:0b:00.3: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.165770] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6 Nov 10 09:35:30 CNC kernel: [ 1.165780] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:35:30 CNC kernel: [ 1.165781] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:35:30 CNC kernel: [ 1.165782] usb usb6: Product: xHCI Host Controller Nov 10 09:35:30 CNC kernel: [ 1.165784] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:35:30 CNC kernel: [ 1.165785] usb usb6: SerialNumber: 0000:0b:00.3 Nov 10 09:35:30 CNC kernel: [ 1.165832] xHCI xhci_add_endpoint called for root hub Nov 10 09:35:30 CNC kernel: [ 1.165833] xHCI xhci_check_bandwidth called for root hub Nov 10 09:35:30 CNC kernel: [ 1.165847] hub 6-0:1.0: USB hub found Nov 10 09:35:30 CNC kernel: [ 1.165851] hub 6-0:1.0: 4 ports detected Nov 10 09:35:30 CNC kernel: [ 1.421786] ata9: SATA link down (SStatus 0 SControl 300) Nov 10 09:35:30 CNC kernel: [ 1.593782] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:35:30 CNC kernel: [ 1.596018] ata1.00: supports DRM functions and may not be fully accessible Nov 10 09:35:30 CNC kernel: [ 1.596041] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133 Nov 10 09:35:30 CNC kernel: [ 1.596043] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA Nov 10 09:35:30 CNC kernel: [ 1.596208] ata1.00: supports DRM functions and may not be fully accessible Nov 10 09:35:30 CNC kernel: [ 1.596231] ata1.00: configured for UDMA/133 Nov 10 09:35:30 CNC kernel: [ 1.596505] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 Nov 10 09:35:30 CNC kernel: [ 1.641792] Refined TSC clocksource calibration: 3593.248 MHz. Nov 10 09:35:30 CNC kernel: [ 1.641797] Switching to clocksource tsc Nov 10 09:35:30 CNC kernel: [ 2.085837] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 10 09:35:30 CNC kernel: [ 2.088827] ata2.00: ATAPI: ATAPI iHBS112 2, PL06, max UDMA/100 Nov 10 09:35:30 CNC kernel: [ 2.091082] ata2.00: configured for UDMA/100 Nov 10 09:35:30 CNC kernel: [ 2.096219] scsi 1:0:0:0: CD-ROM ATAPI iHBS112 2 PL06 PQ: 0 ANSI: 5 Nov 10 09:35:30 CNC kernel: [ 2.585843] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:35:30 CNC kernel: [ 2.597487] ata3.00: ATA-8: OCZ-VERTEX3, 2.22, max UDMA/133 Nov 10 09:35:30 CNC kernel: [ 2.597490] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:35:30 CNC kernel: [ 2.607471] ata3.00: configured for UDMA/133 Nov 10 09:35:30 CNC kernel: [ 2.607567] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.22 PQ: 0 ANSI: 5 Nov 10 09:35:30 CNC kernel: [ 3.097916] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:35:30 CNC kernel: [ 3.098453] ata4.00: ATA-9: WDC WD60EZRX-00MVLB1, 80.00A80, max UDMA/133 Nov 10 09:35:30 CNC kernel: [ 3.098455] ata4.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:35:30 CNC kernel: [ 3.098979] ata4.00: configured for UDMA/133 Nov 10 09:35:30 CNC kernel: [ 3.099252] scsi 3:0:0:0: Direct-Access ATA WDC WD60EZRX-00M 80.0 PQ: 0 ANSI: 5 Nov 10 09:35:30 CNC kernel: [ 3.417925] ata5: SATA link down (SStatus 0 SControl 300) Nov 10 09:35:30 CNC kernel: [ 3.909953] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:35:30 CNC kernel: [ 3.910286] ata6.00: ATA-9: M4-CT064M4SSD2, 070H, max UDMA/100 Nov 10 09:35:30 CNC kernel: [ 3.910288] ata6.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:35:30 CNC kernel: [ 3.910663] ata6.00: configured for UDMA/100 Nov 10 09:35:30 CNC kernel: [ 3.910949] scsi 5:0:0:0: Direct-Access ATA M4-CT064M4SSD2 070H PQ: 0 ANSI: 5 Nov 10 09:35:30 CNC kernel: [ 4.229980] ata7: SATA link down (SStatus 0 SControl 300) Nov 10 09:35:30 CNC kernel: [ 4.550005] ata8: SATA link down (SStatus 0 SControl 300) Nov 10 09:35:30 CNC kernel: [ 4.552765] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) Nov 10 09:35:30 CNC kernel: [ 4.552790] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) Nov 10 09:35:30 CNC kernel: [ 4.552806] sd 0:0:0:0: [sda] Write Protect is off Nov 10 09:35:30 CNC kernel: [ 4.552808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 10 09:35:30 CNC kernel: [ 4.552817] sd 3:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) Nov 10 09:35:30 CNC kernel: [ 4.552820] sd 3:0:0:0: [sdc] 4096-byte physical blocks Nov 10 09:35:30 CNC kernel: [ 4.552824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:35:30 CNC kernel: [ 4.552827] sd 5:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) Nov 10 09:35:30 CNC kernel: [ 4.552835] sd 2:0:0:0: [sdb] Write Protect is off Nov 10 09:35:30 CNC kernel: [ 4.552837] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Nov 10 09:35:30 CNC kernel: [ 4.552850] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:35:30 CNC kernel: [ 4.552856] sd 3:0:0:0: [sdc] Write Protect is off Nov 10 09:35:30 CNC kernel: [ 4.552858] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Nov 10 09:35:30 CNC kernel: [ 4.552872] sd 5:0:0:0: [sdd] Write Protect is off Nov 10 09:35:30 CNC kernel: [ 4.552874] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:35:30 CNC kernel: [ 4.552878] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Nov 10 09:35:30 CNC kernel: [ 4.552891] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:35:30 CNC kernel: [ 4.553299] sdd: sdd1 sdd2 < sdd5 > Nov 10 09:35:30 CNC kernel: [ 4.553460] sd 5:0:0:0: [sdd] Attached SCSI disk Nov 10 09:35:30 CNC kernel: [ 4.553727] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 10 09:35:30 CNC kernel: [ 4.553750] scsi 1:0:0:0: Attached scsi generic sg1 type 5 Nov 10 09:35:30 CNC kernel: [ 4.553770] sd 2:0:0:0: Attached scsi generic sg2 type 0 Nov 10 09:35:30 CNC kernel: [ 4.553788] sd 3:0:0:0: Attached scsi generic sg3 type 0 Nov 10 09:35:30 CNC kernel: [ 4.553807] sd 5:0:0:0: Attached scsi generic sg4 type 0 Nov 10 09:35:30 CNC kernel: [ 4.555194] sda: sda1 sda2 Nov 10 09:35:30 CNC kernel: [ 4.555388] sd 0:0:0:0: [sda] Attached SCSI disk Nov 10 09:35:30 CNC kernel: [ 4.555925] sdb: sdb1 sdb2 sdb3 Nov 10 09:35:30 CNC kernel: [ 4.556103] sd 2:0:0:0: [sdb] Attached SCSI disk Nov 10 09:35:30 CNC kernel: [ 5.046474] sdc: sdc1 Nov 10 09:35:30 CNC kernel: [ 5.046794] sd 3:0:0:0: [sdc] Attached SCSI disk Nov 10 09:35:30 CNC kernel: [ 5.055574] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Nov 10 09:35:30 CNC kernel: [ 5.055577] cdrom: Uniform CD-ROM driver Revision: 3.20 Nov 10 09:35:30 CNC kernel: [ 5.055639] sr 1:0:0:0: Attached scsi CD-ROM sr0 Nov 10 09:35:30 CNC kernel: [ 6.302061] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:35:30 CNC kernel: [ 6.302070] hub 1-0:1.0: couldn't allocate port 5 usb_device Nov 10 09:35:30 CNC kernel: [ 11.302397] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:35:30 CNC kernel: [ 11.302402] hub 1-0:1.0: couldn't allocate port 11 usb_device Nov 10 09:35:30 CNC kernel: [ 16.302889] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:35:30 CNC kernel: [ 16.302895] hub 1-0:1.0: couldn't allocate port 12 usb_device Nov 10 09:35:30 CNC kernel: [ 21.303168] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:35:30 CNC kernel: [ 21.303174] hub 1-0:1.0: couldn't allocate port 13 usb_device Nov 10 09:35:30 CNC kernel: [ 26.303471] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot Nov 10 09:35:30 CNC kernel: [ 26.303482] hub 3-0:1.0: couldn't allocate port 2 usb_device Nov 10 09:35:30 CNC kernel: [ 26.355247] PM: Starting manual resume from disk Nov 10 09:35:30 CNC kernel: [ 26.355249] PM: Hibernation image partition 8:53 present Nov 10 09:35:30 CNC kernel: [ 26.355250] PM: Looking for hibernation image. Nov 10 09:35:30 CNC kernel: [ 26.355403] PM: Image not found (code -22) Nov 10 09:35:30 CNC kernel: [ 26.355404] PM: Hibernation image not present or could not be loaded. Nov 10 09:35:30 CNC kernel: [ 26.360450] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) Nov 10 09:35:30 CNC kernel: [ 26.415592] usb 5-3: new full-speed USB device number 2 using xhci_hcd Nov 10 09:35:30 CNC kernel: [ 26.457772] usb 5-3: New USB device found, idVendor=1a86, idProduct=7523 Nov 10 09:35:30 CNC kernel: [ 26.457775] usb 5-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Nov 10 09:35:30 CNC kernel: [ 26.457777] usb 5-3: Product: USB2.0-Serial Nov 10 09:35:30 CNC kernel: [ 27.277917] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Nov 10 09:35:30 CNC kernel: [ 27.277924] ACPI: Power Button [PWRB] Nov 10 09:35:30 CNC kernel: [ 27.277971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Nov 10 09:35:30 CNC kernel: [ 27.277974] ACPI: Power Button [PWRF] Nov 10 09:35:30 CNC kernel: [ 27.278899] wmi: Mapper loaded Nov 10 09:35:30 CNC kernel: [ 27.297274] [drm] Initialized drm 1.1.0 20060810 Nov 10 09:35:30 CNC kernel: [ 27.303503] hda_intel: Disabling MSI Nov 10 09:35:30 CNC kernel: [ 27.308113] MXM: GUID detected in BIOS Nov 10 09:35:30 CNC kernel: [ 27.314047] asus_wmi: ASUS WMI generic driver loaded Nov 10 09:35:30 CNC kernel: [ 27.314697] asus_wmi: Initialization: 0x0 Nov 10 09:35:30 CNC kernel: [ 27.314716] asus_wmi: BIOS WMI version: 0.9 Nov 10 09:35:30 CNC kernel: [ 27.314749] asus_wmi: SFUN value: 0x0 Nov 10 09:35:30 CNC kernel: [ 27.315060] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2 Nov 10 09:35:30 CNC kernel: [ 27.321124] usbcore: registered new interface driver usbserial Nov 10 09:35:30 CNC kernel: [ 27.321135] usbcore: registered new interface driver usbserial_generic Nov 10 09:35:30 CNC kernel: [ 27.321145] USB Serial support registered for generic Nov 10 09:35:30 CNC kernel: [ 27.321155] usbserial: USB Serial Driver core Nov 10 09:35:30 CNC kernel: [ 27.321788] usbcore: registered new interface driver ch341 Nov 10 09:35:30 CNC kernel: [ 27.321799] USB Serial support registered for ch341-uart Nov 10 09:35:30 CNC kernel: [ 27.321806] ch341 5-3:1.0: ch341-uart converter detected Nov 10 09:35:30 CNC kernel: [ 27.348884] usb 5-3: ch341-uart converter now attached to ttyUSB0 Nov 10 09:35:30 CNC kernel: [ 27.688180] [drm] nouveau 0000:0a:00.0: Detected an NV20 generation card (0x124020a1) Nov 10 09:35:30 CNC kernel: [ 27.688941] [drm] nouveau 0000:0a:00.0: Checking PRAMIN for VBIOS Nov 10 09:35:30 CNC kernel: [ 27.688945] [drm] nouveau 0000:0a:00.0: ... BIOS signature not found Nov 10 09:35:30 CNC kernel: [ 27.688946] [drm] nouveau 0000:0a:00.0: Checking PROM for VBIOS Nov 10 09:35:30 CNC kernel: [ 27.811621] [drm] nouveau 0000:0a:00.0: ... appears to be valid Nov 10 09:35:30 CNC kernel: [ 27.811622] [drm] nouveau 0000:0a:00.0: Using VBIOS from PROM Nov 10 09:35:30 CNC kernel: [ 27.811624] [drm] nouveau 0000:0a:00.0: BIT BIOS found Nov 10 09:35:30 CNC kernel: [ 27.811626] [drm] nouveau 0000:0a:00.0: Bios version 84.04.36.00 Nov 10 09:35:30 CNC kernel: [ 27.811628] [drm] nouveau 0000:0a:00.0: TMDS table version 2.0 Nov 10 09:35:30 CNC kernel: [ 27.811629] [drm] nouveau 0000:0a:00.0: Do not understand BIT U table Nov 10 09:35:30 CNC kernel: [ 27.811698] [drm] nouveau 0000:0a:00.0: DCB version 0x41 unknown Nov 10 09:35:30 CNC kernel: [ 27.959715] Adding 2579452k swap on /dev/sdd5. Priority:-1 extents:1 across:2579452k SS Nov 10 09:35:30 CNC kernel: [ 27.966060] EXT4-fs (sdd1): re-mounted. Opts: (null) Nov 10 09:35:30 CNC kernel: [ 27.995267] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro Nov 10 09:35:30 CNC kernel: [ 28.004249] loop: module loaded Nov 10 09:35:30 CNC kernel: [ 28.259961] RPC: Registered named UNIX socket transport module. Nov 10 09:35:30 CNC kernel: [ 28.259963] RPC: Registered udp transport module. Nov 10 09:35:30 CNC kernel: [ 28.259964] RPC: Registered tcp transport module. Nov 10 09:35:30 CNC kernel: [ 28.259965] RPC: Registered tcp NFSv4.1 backchannel transport module. Nov 10 09:35:30 CNC kernel: [ 28.262728] FS-Cache: Loaded Nov 10 09:35:30 CNC kernel: [ 28.265921] NFS: Registering the id_resolver key type Nov 10 09:35:30 CNC kernel: [ 28.265930] FS-Cache: Netfs 'nfs' registered for caching Nov 10 09:35:30 CNC kernel: [ 28.268332] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Nov 10 09:35:30 CNC acpid: starting up with netlink and the input layer Nov 10 09:35:30 CNC anacron[2772]: Anacron 2.3 started on 2018-11-10 Nov 10 09:35:30 CNC anacron[2772]: Will run job `cron.daily' in 5 min. Nov 10 09:35:30 CNC anacron[2772]: Will run job `cron.weekly' in 10 min. Nov 10 09:35:30 CNC anacron[2772]: Will run job `cron.monthly' in 15 min. Nov 10 09:35:30 CNC anacron[2772]: Jobs will be executed sequentially Nov 10 09:35:30 CNC /usr/sbin/cron[2805]: (CRON) INFO (pidfile fd = 3) Nov 10 09:35:30 CNC /usr/sbin/cron[2842]: (CRON) STARTUP (fork ok) Nov 10 09:35:30 CNC /usr/sbin/cron[2842]: (CRON) INFO (Running @reboot jobs) Nov 10 09:35:30 CNC acpid: 44 rules loaded Nov 10 09:35:30 CNC acpid: waiting for events: event logging is off Nov 10 09:35:30 CNC avahi-daemon[3233]: Found user 'avahi' (UID 106) and group 'avahi' (GID 116). Nov 10 09:35:30 CNC avahi-daemon[3233]: Successfully dropped root privileges. Nov 10 09:35:30 CNC avahi-daemon[3233]: avahi-daemon 0.6.31 starting up. Nov 10 09:35:30 CNC bluetoothd[3246]: Bluetooth daemon 4.99 Nov 10 09:35:30 CNC avahi-daemon[3233]: Successfully called chroot(). Nov 10 09:35:30 CNC avahi-daemon[3233]: Successfully dropped remaining capabilities. Nov 10 09:35:30 CNC avahi-daemon[3233]: Loading service file /services/udisks.service. Nov 10 09:35:30 CNC bluetoothd[3246]: Starting SDP server Nov 10 09:35:30 CNC avahi-daemon[3233]: Network interface enumeration completed. Nov 10 09:35:30 CNC avahi-daemon[3233]: Registering HINFO record with values 'I686'/'LINUX'. Nov 10 09:35:30 CNC avahi-daemon[3233]: Server startup complete. Host name is CNC.local. Local service cookie is 3783133908. Nov 10 09:35:30 CNC avahi-daemon[3233]: Service "CNC" (/services/udisks.service) successfully established. Nov 10 09:35:30 CNC bluetoothd[3246]: Failed to init alert plugin Nov 10 09:35:30 CNC bluetoothd[3246]: Failed to init time plugin Nov 10 09:35:30 CNC kernel: [ 28.623789] Bluetooth: Core ver 2.16 Nov 10 09:35:30 CNC kernel: [ 28.623799] NET: Registered protocol family 31 Nov 10 09:35:30 CNC kernel: [ 28.623801] Bluetooth: HCI device and connection manager initialized Nov 10 09:35:30 CNC kernel: [ 28.623802] Bluetooth: HCI socket layer initialized Nov 10 09:35:30 CNC kernel: [ 28.623804] Bluetooth: L2CAP socket layer initialized Nov 10 09:35:30 CNC kernel: [ 28.623806] Bluetooth: SCO socket layer initialized Nov 10 09:35:30 CNC kernel: [ 28.628298] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Nov 10 09:35:30 CNC kernel: [ 28.628300] Bluetooth: BNEP filters: protocol multicast Nov 10 09:35:30 CNC bluetoothd[3246]: Failed to init gatt_example plugin Nov 10 09:35:30 CNC kernel: [ 28.632772] Bluetooth: RFCOMM TTY layer initialized Nov 10 09:35:30 CNC kernel: [ 28.632775] Bluetooth: RFCOMM socket layer initialized Nov 10 09:35:30 CNC kernel: [ 28.632776] Bluetooth: RFCOMM ver 1.11 Nov 10 09:35:30 CNC NetworkManager[3369]: <info> NetworkManager (version 0.9.4.0) is starting... Nov 10 09:35:30 CNC NetworkManager[3369]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Nov 10 09:35:30 CNC kernel: [ 28.639730] lp: driver loaded but no devices found Nov 10 09:35:30 CNC kernel: [ 28.641561] ppdev: user-space parallel port driver Nov 10 09:35:30 CNC udev-configure-printer: add /module/lp Nov 10 09:35:30 CNC udev-configure-printer: Failed to get parent Nov 10 09:35:30 CNC dbus[2988]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper) Nov 10 09:35:30 CNC polkitd[3452]: started daemon version 0.105 using authority implementation `local' version `0.105' Nov 10 09:35:30 CNC dbus[2988]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: init! Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: update_system_hostname Nov 10 09:35:30 CNC NetworkManager[3369]: SCPluginIfupdown: management mode: unmanaged Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: end _init. Nov 10 09:35:30 CNC NetworkManager[3369]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Nov 10 09:35:30 CNC NetworkManager[3369]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Nov 10 09:35:30 CNC NetworkManager[3369]: Ifupdown: get unmanaged devices count: 0 Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: (161529528) ... get_connections. Nov 10 09:35:30 CNC NetworkManager[3369]: SCPlugin-Ifupdown: (161529528) ... get_connections (managed=false): return empty list. Nov 10 09:35:30 CNC NetworkManager[3369]: keyfile: parsing Wired connection 1 ... Nov 10 09:35:30 CNC NetworkManager[3369]: keyfile: read connection 'Wired connection 1' Nov 10 09:35:30 CNC NetworkManager[3369]: Ifupdown: get unmanaged devices count: 0 Nov 10 09:35:30 CNC NetworkManager[3369]: <info> trying to start the modem manager... Nov 10 09:35:30 CNC dbus[2988]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper) Nov 10 09:35:30 CNC NetworkManager[3369]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 10 09:35:30 CNC NetworkManager[3369]: <info> monitoring ifupdown state file '/run/network/ifstate'. Nov 10 09:35:30 CNC NetworkManager[3369]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 10 09:35:30 CNC NetworkManager[3369]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 10 09:35:30 CNC NetworkManager[3369]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 10 09:35:30 CNC NetworkManager[3369]: <info> Networking is enabled by state file Nov 10 09:35:30 CNC modem-manager[3490]: <info> ModemManager (version 0.5.2.0) starting... Nov 10 09:35:30 CNC dbus[2988]: [system] Successfully activated service 'org.freedesktop.ModemManager' Nov 10 09:35:30 CNC NetworkManager[3369]: <info> modem-manager is now available Nov 10 09:35:30 CNC acpid: client connected from 3439[0:0] Nov 10 09:35:30 CNC acpid: 1 client rule loaded Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Generic Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Samsung Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Ericsson MBM Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Huawei Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Novatel Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin SimTech Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Nokia Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Option Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin ZTE Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Sierra Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Gobi Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin X22X Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Longcheer Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin AnyData Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin MotoC Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Wavecom Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Linktop Nov 10 09:35:30 CNC modem-manager[3490]: <info> Loaded plugin Option High-Speed Nov 10 09:35:31 CNC dbus[2988]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper) Nov 10 09:35:31 CNC dbus[2988]: [system] Successfully activated service 'org.freedesktop.ConsoleKit' Nov 10 09:35:31 CNC kernel: [ 29.551339] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input3 Nov 10 09:35:31 CNC dbus[2988]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Nov 10 09:35:31 CNC dbus[2988]: [system] Successfully activated service 'org.freedesktop.UDisks' Nov 10 09:35:31 CNC dbus[2988]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper) Nov 10 09:35:31 CNC dbus[2988]: [system] Successfully activated service 'org.freedesktop.UPower' Nov 10 09:35:31 CNC anacron[3821]: Anacron 2.3 started on 2018-11-10 Nov 10 09:35:31 CNC anacron[3821]: Will run job `cron.daily' in 5 min. Nov 10 09:35:31 CNC anacron[3821]: Will run job `cron.weekly' in 10 min. Nov 10 09:35:31 CNC anacron[3821]: Will run job `cron.monthly' in 15 min. Nov 10 09:35:31 CNC anacron[3821]: Jobs will be executed sequentially Nov 10 09:35:32 CNC dbus[2988]: [system] Activating service name='org.debian.apt' (using servicehelper) Nov 10 09:35:33 CNC AptDaemon: INFO: Initializing daemon Nov 10 09:35:33 CNC dbus[2988]: [system] Successfully activated service 'org.debian.apt' Nov 10 09:47:00 CNC kernel: imklog 5.8.11, log source = /proc/kmsg started. Nov 10 09:47:00 CNC rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2635" x-info="http://www.rsyslog.com"] start Nov 10 09:47:00 CNC kernel: [ 0.000000] Initializing cgroup subsys cpuset Nov 10 09:47:00 CNC kernel: [ 0.000000] Initializing cgroup subsys cpu Nov 10 09:47:00 CNC kernel: [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-provided physical RAM map: Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 0000000004000000 - 000000000400a000 (ACPI NVS) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 000000000400a000 - 0000000009d00000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 0000000009d00000 - 000000000a000000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 000000000a000000 - 000000000b000000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 000000000b000000 - 000000000b020000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 000000000b020000 - 00000000da0c4000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000da0c4000 - 00000000db5c0000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000db5c0000 - 00000000db5e1000 (ACPI data) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000db5e1000 - 00000000dba92000 (ACPI NVS) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000dba92000 - 00000000dc858000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000dc858000 - 00000000df000000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000df000000 - 00000000e0000000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fea00000 - 00000000fea10000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000feb80000 - 00000000fec02000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fec30000 - 00000000fec31000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fedc2000 - 00000000fedd0000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fedd4000 - 00000000fedd6000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000081f380000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Nov 10 09:47:00 CNC kernel: [ 0.000000] SMBIOS 2.8 present. Nov 10 09:47:00 CNC kernel: [ 0.000000] DMI: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6001 02/09/2018 Nov 10 09:47:00 CNC kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Nov 10 09:47:00 CNC kernel: [ 0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x100000 Nov 10 09:47:00 CNC kernel: [ 0.000000] MTRR default type: uncachable Nov 10 09:47:00 CNC kernel: [ 0.000000] MTRR fixed ranges enabled: Nov 10 09:47:00 CNC kernel: [ 0.000000] 00000-9FFFF write-back Nov 10 09:47:00 CNC kernel: [ 0.000000] A0000-BFFFF write-through Nov 10 09:47:00 CNC kernel: [ 0.000000] C0000-FFFFF write-protect Nov 10 09:47:00 CNC kernel: [ 0.000000] MTRR variable ranges enabled: Nov 10 09:47:00 CNC kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back Nov 10 09:47:00 CNC kernel: [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back Nov 10 09:47:00 CNC kernel: [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back Nov 10 09:47:00 CNC kernel: [ 0.000000] 3 disabled Nov 10 09:47:00 CNC kernel: [ 0.000000] 4 disabled Nov 10 09:47:00 CNC kernel: [ 0.000000] 5 disabled Nov 10 09:47:00 CNC kernel: [ 0.000000] 6 disabled Nov 10 09:47:00 CNC kernel: [ 0.000000] 7 disabled Nov 10 09:47:00 CNC kernel: [ 0.000000] TOM2: 0000000820000000 aka 33280M Nov 10 09:47:00 CNC kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Nov 10 09:47:00 CNC kernel: [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) Nov 10 09:47:00 CNC kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 Nov 10 09:47:00 CNC kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Nov 10 09:47:00 CNC kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Nov 10 09:47:00 CNC kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Nov 10 09:47:00 CNC kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Nov 10 09:47:00 CNC kernel: [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] Nov 10 09:47:00 CNC kernel: [ 0.000000] RAMDISK: 36417000 - 37203000 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: RSDP 000f05b0 00024 (v02 ALASKA) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: XSDT db5c6098 000A4 (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: FACP db5cf488 00114 (v06 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI Warning: FADT (revision 6) is longer than ACPI 5.0 version, truncating length 276 to 268 (20120320/tbfadt-294) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: DSDT db5c61d0 092B1 (v02 ALASKA A M I 01072009 INTL 20120913) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: FACS dba7ae00 00040 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: APIC db5cf5a0 000DE (v03 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: FPDT db5cf680 00044 (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: FIDT db5cf6c8 0009C (v01 ALASKA A M I 01072009 AMI 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5cf768 08C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5d8400 02314 (v01 AMD AMD CPU 00000001 AMD 00000001) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: CRAT db5da718 00F50 (v01 AMD AMD CRAT 00000001 AMD 00000001) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: CDIT db5db668 00029 (v01 AMD AMD CDIT 00000001 AMD 00000001) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5db698 02DA5 (v01 AMD AMD AOD 00000001 INTL 20120913) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: MCFG db5de440 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5de748 01993 (v01 AMD AmdTable 00000001 INTL 20120913) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: HPET db5de4d8 00038 (v01 ALASKA A M I 01072009 AMI 00000005) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5de510 00024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: UEFI db5de538 00042 (v01 00000000 00000000) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IVRS db5de580 000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: SSDT db5de650 000F8 (v01 AMD AMD PT 00001000 INTL 20120913) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 10 09:47:00 CNC kernel: [ 0.000000] 2680MB HIGHMEM available. Nov 10 09:47:00 CNC kernel: [ 0.000000] 887MB LOWMEM available. Nov 10 09:47:00 CNC kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Nov 10 09:47:00 CNC kernel: [ 0.000000] low ram: 0 - 377fe000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Zone PFN ranges: Nov 10 09:47:00 CNC kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Nov 10 09:47:00 CNC kernel: [ 0.000000] HighMem 0x000377fe -> 0x000df000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Movable zone start PFN for each node Nov 10 09:47:00 CNC kernel: [ 0.000000] Early memory PFN ranges Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009d Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x00000100 -> 0x00004000 Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x0000400a -> 0x00009d00 Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x0000a000 -> 0x0000b000 Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x0000b020 -> 0x000da0c4 Nov 10 09:47:00 CNC kernel: [ 0.000000] 0: 0x000dc858 -> 0x000df000 Nov 10 09:47:00 CNC kernel: [ 0.000000] On node 0 totalpages: 902351 Nov 10 09:47:00 CNC kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4837200 Nov 10 09:47:00 CNC kernel: [ 0.000000] DMA zone: 32 pages used for memmap Nov 10 09:47:00 CNC kernel: [ 0.000000] DMA zone: 0 pages reserved Nov 10 09:47:00 CNC kernel: [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 Nov 10 09:47:00 CNC kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Nov 10 09:47:00 CNC kernel: [ 0.000000] Normal zone: 220676 pages, LIFO batch:31 Nov 10 09:47:00 CNC kernel: [ 0.000000] HighMem zone: 5361 pages used for memmap Nov 10 09:47:00 CNC kernel: [ 0.000000] HighMem zone: 670589 pages, LIFO batch:31 Nov 10 09:47:00 CNC kernel: [ 0.000000] Using APIC driver default Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x8 ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x9 ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0xa ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xb ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 12/0xc ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 13/0xd ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 14/0xe ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 15/0xf ignored. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IOAPIC (id[0x11] address[0xfec00000] gsi_base[0]) Nov 10 09:47:00 CNC kernel: [ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IOAPIC (id[0x12] address[0xfec01000] gsi_base[24]) Nov 10 09:47:00 CNC kernel: [ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IRQ0 used by override. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IRQ2 used by override. Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: IRQ9 used by override. Nov 10 09:47:00 CNC kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Nov 10 09:47:00 CNC kernel: [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 Nov 10 09:47:00 CNC kernel: [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 Nov 10 09:47:00 CNC kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs Nov 10 09:47:00 CNC kernel: [ 0.000000] nr_irqs_gsi: 72 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 0000000004000000 - 000000000400a000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 0000000009d00000 - 000000000a000000 Nov 10 09:47:00 CNC kernel: [ 0.000000] PM: Registered nosave memory: 000000000b000000 - 000000000b020000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Nov 10 09:47:00 CNC kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Nov 10 09:47:00 CNC kernel: [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7762000 s48384 r0 d21248 u69632 Nov 10 09:47:00 CNC kernel: [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 Nov 10 09:47:00 CNC kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Nov 10 09:47:00 CNC kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 895214 Nov 10 09:47:00 CNC kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=89cd3693-0013-4b3c-a2cf-24160b7c0f6e ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 Nov 10 09:47:00 CNC kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Nov 10 09:47:00 CNC kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 10 09:47:00 CNC kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 10 09:47:00 CNC kernel: [ 0.000000] Initializing CPU#0 Nov 10 09:47:00 CNC kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Nov 10 09:47:00 CNC kernel: [ 0.000000] allocated 7307136 bytes of page_cgroup Nov 10 09:47:00 CNC kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Nov 10 09:47:00 CNC kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:000df000) Nov 10 09:47:00 CNC kernel: [ 0.000000] Memory: 3552184k/3653632k available (3495k kernel code, 57220k reserved, 1237k data, 416k init, 2703800k highmem) Nov 10 09:47:00 CNC kernel: [ 0.000000] virtual kernel memory layout: Nov 10 09:47:00 CNC kernel: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) Nov 10 09:47:00 CNC kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Nov 10 09:47:00 CNC kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Nov 10 09:47:00 CNC kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Nov 10 09:47:00 CNC kernel: [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) Nov 10 09:47:00 CNC kernel: [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) Nov 10 09:47:00 CNC kernel: [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) Nov 10 09:47:00 CNC kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Nov 10 09:47:00 CNC kernel: [ 0.000000] Preemptible hierarchical RCU implementation. Nov 10 09:47:00 CNC kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Nov 10 09:47:00 CNC kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:1288 16 Nov 10 09:47:00 CNC kernel: [ 0.000000] CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Extended CMOS year: 2000 Nov 10 09:47:00 CNC kernel: [ 0.000000] Interrupt pipeline (release #3) Nov 10 09:47:00 CNC kernel: [ 0.000000] spurious 8259A interrupt: IRQ7. Nov 10 09:47:00 CNC kernel: [ 0.000000] Console: colour VGA+ 80x25 Nov 10 09:47:00 CNC kernel: [ 0.000000] console [tty0] enabled Nov 10 09:47:00 CNC kernel: [ 0.000000] hpet clockevent registered Nov 10 09:47:00 CNC kernel: [ 0.000000] Fast TSC calibration failed Nov 10 09:47:00 CNC kernel: [ 0.004000] TSC: PIT calibration matches HPET. 1 loops Nov 10 09:47:00 CNC kernel: [ 0.004000] Detected 3592.830 MHz processor. Nov 10 09:47:00 CNC kernel: [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.66 BogoMIPS (lpj=14371320) Nov 10 09:47:00 CNC kernel: [ 0.000003] pid_max: default: 32768 minimum: 301 Nov 10 09:47:00 CNC kernel: [ 0.000025] Security Framework initialized Nov 10 09:47:00 CNC kernel: [ 0.000028] AppArmor: AppArmor disabled by boot time parameter Nov 10 09:47:00 CNC kernel: [ 0.000036] Mount-cache hash table entries: 512 Nov 10 09:47:00 CNC kernel: [ 0.000138] Initializing cgroup subsys cpuacct Nov 10 09:47:00 CNC kernel: [ 0.000139] Initializing cgroup subsys memory Nov 10 09:47:00 CNC kernel: [ 0.000143] Initializing cgroup subsys devices Nov 10 09:47:00 CNC kernel: [ 0.000144] Initializing cgroup subsys freezer Nov 10 09:47:00 CNC kernel: [ 0.000145] Initializing cgroup subsys net_cls Nov 10 09:47:00 CNC kernel: [ 0.000146] Initializing cgroup subsys blkio Nov 10 09:47:00 CNC kernel: [ 0.000149] Initializing cgroup subsys perf_event Nov 10 09:47:00 CNC kernel: [ 0.000165] CPU: Physical Processor ID: 0 Nov 10 09:47:00 CNC kernel: [ 0.000166] CPU: Processor Core ID: 0 Nov 10 09:47:00 CNC kernel: [ 0.005746] mce: CPU supports 23 MCE banks Nov 10 09:47:00 CNC kernel: [ 0.005770] LVT offset 1 assigned for vector 0xf9 Nov 10 09:47:00 CNC kernel: [ 0.005823] ACPI: Core revision 20120320 Nov 10 09:47:00 CNC kernel: [ 0.041681] Enabling APIC mode: Flat. Using 2 I/O APICs Nov 10 09:47:00 CNC kernel: [ 0.042496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Nov 10 09:47:00 CNC kernel: [ 0.082179] CPU0: AMD Ryzen 7 1800X Eight-Core Processor stepping 01 Nov 10 09:47:00 CNC kernel: [ 0.186894] Performance Events: no PMU driver, software events only. Nov 10 09:47:00 CNC kernel: [ 0.198920] NMI watchdog: disabled (cpu0): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.211283] CPU 1 irqstacks, hard=f3cb6000 soft=f3cb8000 Nov 10 09:47:00 CNC kernel: [ 0.211285] Booting Node 0, Processors #1 Nov 10 09:47:00 CNC kernel: [ 0.221226] Initializing CPU#1 Nov 10 09:47:00 CNC kernel: [ 0.229891] NMI watchdog: disabled (cpu1): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.235528] CPU 2 irqstacks, hard=f3cc8000 soft=f3cca000 Nov 10 09:47:00 CNC kernel: [ 0.235530] #2 Nov 10 09:47:00 CNC kernel: [ 0.245463] Initializing CPU#2 Nov 10 09:47:00 CNC kernel: [ 0.254127] NMI watchdog: disabled (cpu2): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.258929] CPU 3 irqstacks, hard=f3cfc000 soft=f3cfe000 Nov 10 09:47:00 CNC kernel: [ 0.258931] #3 Nov 10 09:47:00 CNC kernel: [ 0.268872] Initializing CPU#3 Nov 10 09:47:00 CNC kernel: [ 0.277429] NMI watchdog: disabled (cpu3): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.282929] CPU 4 irqstacks, hard=f3d0e000 soft=f3d10000 Nov 10 09:47:00 CNC kernel: [ 0.282931] #4 Nov 10 09:47:00 CNC kernel: [ 0.292872] Initializing CPU#4 Nov 10 09:47:00 CNC kernel: [ 0.301530] NMI watchdog: disabled (cpu4): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.306933] CPU 5 irqstacks, hard=f3d20000 soft=f3d22000 Nov 10 09:47:00 CNC kernel: [ 0.306935] #5 Nov 10 09:47:00 CNC kernel: [ 0.316877] Initializing CPU#5 Nov 10 09:47:00 CNC kernel: [ 0.325534] NMI watchdog: disabled (cpu5): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.330934] CPU 6 irqstacks, hard=f3d34000 soft=f3d36000 Nov 10 09:47:00 CNC kernel: [ 0.330936] #6 Nov 10 09:47:00 CNC kernel: [ 0.340878] Initializing CPU#6 Nov 10 09:47:00 CNC kernel: [ 0.349534] NMI watchdog: disabled (cpu6): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.354926] CPU 7 irqstacks, hard=f3d62000 soft=f3d64000 Nov 10 09:47:00 CNC kernel: [ 0.354928] #7 Ok. Nov 10 09:47:00 CNC kernel: [ 0.364871] Initializing CPU#7 Nov 10 09:47:00 CNC kernel: [ 0.373526] NMI watchdog: disabled (cpu7): hardware events not enabled Nov 10 09:47:00 CNC kernel: [ 0.373542] Brought up 8 CPUs Nov 10 09:47:00 CNC kernel: [ 0.373543] Total of 8 processors activated (57485.28 BogoMIPS). Nov 10 09:47:00 CNC kernel: [ 0.374344] devtmpfs: initialized Nov 10 09:47:00 CNC kernel: [ 0.374476] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) Nov 10 09:47:00 CNC kernel: [ 0.374479] PM: Registering ACPI NVS region [mem 0xdb5e1000-0xdba91fff] (4919296 bytes) Nov 10 09:47:00 CNC kernel: [ 0.374607] dummy: Nov 10 09:47:00 CNC kernel: [ 0.374650] NET: Registered protocol family 16 Nov 10 09:47:00 CNC kernel: [ 0.374898] ACPI: bus type pci registered Nov 10 09:47:00 CNC kernel: [ 0.374934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) Nov 10 09:47:00 CNC kernel: [ 0.374936] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 Nov 10 09:47:00 CNC kernel: [ 0.374937] PCI: Using MMCONFIG for extended config space Nov 10 09:47:00 CNC kernel: [ 0.374937] PCI: Using configuration type 1 for base access Nov 10 09:47:00 CNC kernel: [ 0.375064] mtrr: your CPUs had inconsistent variable MTRR settings Nov 10 09:47:00 CNC kernel: [ 0.375065] mtrr: probably your BIOS does not setup all CPUs. Nov 10 09:47:00 CNC kernel: [ 0.375065] mtrr: corrected configuration. Nov 10 09:47:00 CNC kernel: [ 0.375370] bio: create slab <bio-0> at 0 Nov 10 09:47:00 CNC kernel: [ 0.375446] ACPI: Added _OSI(Module Device) Nov 10 09:47:00 CNC kernel: [ 0.375448] ACPI: Added _OSI(Processor Device) Nov 10 09:47:00 CNC kernel: [ 0.375449] ACPI: Added _OSI(3.0 _SCP Extensions) Nov 10 09:47:00 CNC kernel: [ 0.375450] ACPI: Added _OSI(Processor Aggregator Device) Nov 10 09:47:00 CNC kernel: [ 0.377223] ACPI: EC: Look up EC in DSDT Nov 10 09:47:00 CNC kernel: [ 0.378898] ACPI: Executed 2 blocks of module-level executable AML code Nov 10 09:47:00 CNC kernel: [ 0.383804] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Nov 10 09:47:00 CNC kernel: [ 0.385955] ACPI: Interpreter enabled Nov 10 09:47:00 CNC kernel: [ 0.385961] ACPI: (supports S0 S3 S4 S5) Nov 10 09:47:00 CNC kernel: [ 0.385974] ACPI: Using IOAPIC for interrupt routing Nov 10 09:47:00 CNC kernel: [ 0.391075] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62 Nov 10 09:47:00 CNC kernel: [ 0.391236] ACPI: No dock devices found. Nov 10 09:47:00 CNC kernel: [ 0.391240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Nov 10 09:47:00 CNC kernel: [ 0.391454] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Nov 10 09:47:00 CNC kernel: [ 0.391690] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] Nov 10 09:47:00 CNC kernel: [ 0.391692] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] Nov 10 09:47:00 CNC kernel: [ 0.391693] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] Nov 10 09:47:00 CNC kernel: [ 0.391694] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.391696] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Nov 10 09:47:00 CNC kernel: [ 0.391697] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] Nov 10 09:47:00 CNC kernel: [ 0.391699] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfec2ffff] Nov 10 09:47:00 CNC kernel: [ 0.391700] pci_root PNP0A08:00: host bridge window [mem 0xfee00000-0xffffffff] Nov 10 09:47:00 CNC kernel: [ 0.391717] PCI host bridge to bus 0000:00 Nov 10 09:47:00 CNC kernel: [ 0.391718] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] Nov 10 09:47:00 CNC kernel: [ 0.391719] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] Nov 10 09:47:00 CNC kernel: [ 0.391720] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] Nov 10 09:47:00 CNC kernel: [ 0.391721] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.391723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Nov 10 09:47:00 CNC kernel: [ 0.391724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] Nov 10 09:47:00 CNC kernel: [ 0.391725] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff] Nov 10 09:47:00 CNC kernel: [ 0.391727] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff] Nov 10 09:47:00 CNC kernel: [ 0.391734] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.391759] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 Nov 10 09:47:00 CNC kernel: [ 0.391813] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.391838] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.392046] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.392082] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392116] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392140] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.392207] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.392250] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392290] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392311] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.392365] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.392404] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392425] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.392481] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.392556] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 Nov 10 09:47:00 CNC kernel: [ 0.392713] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 Nov 10 09:47:00 CNC kernel: [ 0.392874] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392887] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392900] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392913] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392926] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392939] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392952] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.392964] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 Nov 10 09:47:00 CNC kernel: [ 0.393070] pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330 Nov 10 09:47:00 CNC kernel: [ 0.393083] pci 0000:01:00.0: reg 10: [mem 0xf75a0000-0xf75a7fff 64bit] Nov 10 09:47:00 CNC kernel: [ 0.393133] pci 0000:01:00.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.393160] pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601 Nov 10 09:47:00 CNC kernel: [ 0.393199] pci 0000:01:00.1: reg 24: [mem 0xf7580000-0xf759ffff] Nov 10 09:47:00 CNC kernel: [ 0.393206] pci 0000:01:00.1: reg 30: [mem 0xf7500000-0xf757ffff pref] Nov 10 09:47:00 CNC kernel: [ 0.393227] pci 0000:01:00.1: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.393249] pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.393300] pci 0000:01:00.2: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.398933] pci 0000:00:01.3: PCI bridge to [bus 01-09] Nov 10 09:47:00 CNC kernel: [ 0.398938] pci 0000:00:01.3: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.398941] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff] Nov 10 09:47:00 CNC kernel: [ 0.398995] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399054] pci 0000:02:00.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399087] pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399144] pci 0000:02:02.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399173] pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399230] pci 0000:02:03.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399260] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399315] pci 0000:02:04.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399344] pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399399] pci 0000:02:05.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399430] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399485] pci 0000:02:06.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399516] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400 Nov 10 09:47:00 CNC kernel: [ 0.399570] pci 0000:02:07.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.399611] pci 0000:01:00.2: PCI bridge to [bus 02-09] Nov 10 09:47:00 CNC kernel: [ 0.399616] pci 0000:01:00.2: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.399619] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.400050] pci 0000:03:00.0: [1b21:1343] type 00 class 0x0c0330 Nov 10 09:47:00 CNC kernel: [ 0.400074] pci 0000:03:00.0: reg 10: [mem 0xf7400000-0xf7407fff 64bit] Nov 10 09:47:00 CNC kernel: [ 0.400209] pci 0000:03:00.0: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.406937] pci 0000:02:00.0: PCI bridge to [bus 03-03] Nov 10 09:47:00 CNC kernel: [ 0.406945] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.407026] pci 0000:04:00.0: [8086:1539] type 00 class 0x020000 Nov 10 09:47:00 CNC kernel: [ 0.407051] pci 0000:04:00.0: reg 10: [mem 0xf7300000-0xf731ffff] Nov 10 09:47:00 CNC kernel: [ 0.407084] pci 0000:04:00.0: reg 18: [io 0xe000-0xe01f] Nov 10 09:47:00 CNC kernel: [ 0.407102] pci 0000:04:00.0: reg 1c: [mem 0xf7320000-0xf7323fff] Nov 10 09:47:00 CNC kernel: [ 0.407209] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.414940] pci 0000:02:02.0: PCI bridge to [bus 04-04] Nov 10 09:47:00 CNC kernel: [ 0.414946] pci 0000:02:02.0: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.414950] pci 0000:02:02.0: bridge window [mem 0xf7300000-0xf73fffff] Nov 10 09:47:00 CNC kernel: [ 0.414998] pci 0000:02:03.0: PCI bridge to [bus 05-05] Nov 10 09:47:00 CNC kernel: [ 0.415050] pci 0000:02:04.0: PCI bridge to [bus 06-06] Nov 10 09:47:00 CNC kernel: [ 0.415102] pci 0000:02:05.0: PCI bridge to [bus 07-07] Nov 10 09:47:00 CNC kernel: [ 0.415153] pci 0000:02:06.0: PCI bridge to [bus 08-08] Nov 10 09:47:00 CNC kernel: [ 0.415232] pci 0000:09:00.0: [544d:6178] type 00 class 0x048000 Nov 10 09:47:00 CNC kernel: [ 0.415256] pci 0000:09:00.0: reg 10: [mem 0xf7200000-0xf723ffff] Nov 10 09:47:00 CNC kernel: [ 0.422940] pci 0000:02:07.0: PCI bridge to [bus 09-09] Nov 10 09:47:00 CNC kernel: [ 0.422948] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff] Nov 10 09:47:00 CNC kernel: [ 0.423282] pci 0000:0a:00.0: [10de:13c2] type 00 class 0x030000 Nov 10 09:47:00 CNC kernel: [ 0.423296] pci 0000:0a:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] Nov 10 09:47:00 CNC kernel: [ 0.423310] pci 0000:0a:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Nov 10 09:47:00 CNC kernel: [ 0.423324] pci 0000:0a:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref] Nov 10 09:47:00 CNC kernel: [ 0.423333] pci 0000:0a:00.0: reg 24: [io 0xd000-0xd07f] Nov 10 09:47:00 CNC kernel: [ 0.423342] pci 0000:0a:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref] Nov 10 09:47:00 CNC kernel: [ 0.423405] pci 0000:0a:00.1: [10de:0fbb] type 00 class 0x040300 Nov 10 09:47:00 CNC kernel: [ 0.423418] pci 0000:0a:00.1: reg 10: [mem 0xf7080000-0xf7083fff] Nov 10 09:47:00 CNC kernel: [ 0.430940] pci 0000:00:03.1: PCI bridge to [bus 0a-0a] Nov 10 09:47:00 CNC kernel: [ 0.430945] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff] Nov 10 09:47:00 CNC kernel: [ 0.430949] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] Nov 10 09:47:00 CNC kernel: [ 0.430953] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:47:00 CNC kernel: [ 0.431286] pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000 Nov 10 09:47:00 CNC kernel: [ 0.431339] pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000 Nov 10 09:47:00 CNC kernel: [ 0.431352] pci 0000:0b:00.2: reg 18: [mem 0xf7700000-0xf77fffff] Nov 10 09:47:00 CNC kernel: [ 0.431364] pci 0000:0b:00.2: reg 24: [mem 0xf7800000-0xf7801fff] Nov 10 09:47:00 CNC kernel: [ 0.431396] pci 0000:0b:00.3: [1022:145c] type 00 class 0x0c0330 Nov 10 09:47:00 CNC kernel: [ 0.431404] pci 0000:0b:00.3: reg 10: [mem 0xf7600000-0xf76fffff 64bit] Nov 10 09:47:00 CNC kernel: [ 0.431435] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.431456] pci 0000:00:07.1: PCI bridge to [bus 0b-0b] Nov 10 09:47:00 CNC kernel: [ 0.431460] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff] Nov 10 09:47:00 CNC kernel: [ 0.431536] pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000 Nov 10 09:47:00 CNC kernel: [ 0.431591] pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601 Nov 10 09:47:00 CNC kernel: [ 0.431615] pci 0000:0c:00.2: reg 24: [mem 0xf7908000-0xf7908fff] Nov 10 09:47:00 CNC kernel: [ 0.431635] pci 0000:0c:00.2: PME# supported from D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.431652] pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300 Nov 10 09:47:00 CNC kernel: [ 0.431658] pci 0000:0c:00.3: reg 10: [mem 0xf7900000-0xf7907fff] Nov 10 09:47:00 CNC kernel: [ 0.431692] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold Nov 10 09:47:00 CNC kernel: [ 0.431713] pci 0000:00:08.1: PCI bridge to [bus 0c-0c] Nov 10 09:47:00 CNC kernel: [ 0.431717] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff] Nov 10 09:47:00 CNC kernel: [ 0.431728] pci_bus 0000:00: on NUMA node 0 Nov 10 09:47:00 CNC kernel: [ 0.431731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 10 09:47:00 CNC kernel: [ 0.431798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP8._PRT] Nov 10 09:47:00 CNC kernel: [ 0.431828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP17._PRT] Nov 10 09:47:00 CNC kernel: [ 0.431853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP18._PRT] Nov 10 09:47:00 CNC kernel: [ 0.431885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP2._PRT] Nov 10 09:47:00 CNC kernel: [ 0.432020] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) Nov 10 09:47:00 CNC kernel: [ 0.435931] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.435967] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.435996] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436034] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436069] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436096] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436122] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436148] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 Nov 10 09:47:00 CNC kernel: [ 0.436204] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none Nov 10 09:47:00 CNC kernel: [ 0.436206] vgaarb: loaded Nov 10 09:47:00 CNC kernel: [ 0.436207] vgaarb: bridge control possible 0000:0a:00.0 Nov 10 09:47:00 CNC kernel: [ 0.436221] PCI: Using ACPI for IRQ routing Nov 10 09:47:00 CNC kernel: [ 0.440288] PCI: pci_cache_line_size set to 64 bytes Nov 10 09:47:00 CNC kernel: [ 0.440372] reserve RAM buffer: 000000000009d400 - 000000000009ffff Nov 10 09:47:00 CNC kernel: [ 0.440373] reserve RAM buffer: 0000000009d00000 - 000000000bffffff Nov 10 09:47:00 CNC kernel: [ 0.440374] reserve RAM buffer: 000000000b000000 - 000000000bffffff Nov 10 09:47:00 CNC kernel: [ 0.440376] reserve RAM buffer: 00000000da0c4000 - 00000000dbffffff Nov 10 09:47:00 CNC kernel: [ 0.440377] reserve RAM buffer: 00000000df000000 - 00000000dfffffff Nov 10 09:47:00 CNC kernel: [ 0.440450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Nov 10 09:47:00 CNC kernel: [ 0.440453] hpet0: 3 comparators, 32-bit 14.318180 MHz counter Nov 10 09:47:00 CNC kernel: [ 0.442484] Switching to clocksource hpet Nov 10 09:47:00 CNC kernel: [ 0.442542] pnp: PnP ACPI init Nov 10 09:47:00 CNC kernel: [ 0.442547] ACPI: bus type pnp registered Nov 10 09:47:00 CNC kernel: [ 0.442684] pnp 00:00: [bus 00-ff] Nov 10 09:47:00 CNC kernel: [ 0.442685] pnp 00:00: [io 0x0cf8-0x0cff] Nov 10 09:47:00 CNC kernel: [ 0.442687] pnp 00:00: [io 0x0000-0x03af window] Nov 10 09:47:00 CNC kernel: [ 0.442688] pnp 00:00: [io 0x03e0-0x0cf7 window] Nov 10 09:47:00 CNC kernel: [ 0.442689] pnp 00:00: [io 0x03b0-0x03df window] Nov 10 09:47:00 CNC kernel: [ 0.442690] pnp 00:00: [io 0x0d00-0xefff window] Nov 10 09:47:00 CNC kernel: [ 0.442691] pnp 00:00: [mem 0x000a0000-0x000bffff window] Nov 10 09:47:00 CNC kernel: [ 0.442692] pnp 00:00: [mem 0x000c0000-0x000dffff window] Nov 10 09:47:00 CNC kernel: [ 0.442693] pnp 00:00: [mem 0xe0000000-0xfec2ffff window] Nov 10 09:47:00 CNC kernel: [ 0.442694] pnp 00:00: [mem 0xfee00000-0xffffffff window] Nov 10 09:47:00 CNC kernel: [ 0.442696] pnp 00:00: [mem 0x00000000 window] Nov 10 09:47:00 CNC kernel: [ 0.442724] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Nov 10 09:47:00 CNC kernel: [ 0.442746] pnp 00:01: [mem 0xf8000000-0xfbffffff] Nov 10 09:47:00 CNC kernel: [ 0.442771] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.442773] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Nov 10 09:47:00 CNC kernel: [ 0.442808] pnp 00:02: [mem 0xfeb80000-0xfebfffff] Nov 10 09:47:00 CNC kernel: [ 0.442830] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.442832] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:47:00 CNC kernel: [ 0.442893] pnp 00:03: [mem 0xfd800000-0xfdffffff] Nov 10 09:47:00 CNC kernel: [ 0.442894] pnp 00:03: [mem 0x00000000-0xffffffff disabled] Nov 10 09:47:00 CNC kernel: [ 0.442935] system 00:03: [mem 0xfd800000-0xfdffffff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.442937] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:47:00 CNC kernel: [ 0.442949] pnp 00:04: [dma 4] Nov 10 09:47:00 CNC kernel: [ 0.442950] pnp 00:04: [io 0x0000-0x000f] Nov 10 09:47:00 CNC kernel: [ 0.442951] pnp 00:04: [io 0x0081-0x0083] Nov 10 09:47:00 CNC kernel: [ 0.442952] pnp 00:04: [io 0x0087] Nov 10 09:47:00 CNC kernel: [ 0.442953] pnp 00:04: [io 0x0089-0x008b] Nov 10 09:47:00 CNC kernel: [ 0.442954] pnp 00:04: [io 0x008f] Nov 10 09:47:00 CNC kernel: [ 0.442955] pnp 00:04: [io 0x00c0-0x00df] Nov 10 09:47:00 CNC kernel: [ 0.442972] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) Nov 10 09:47:00 CNC kernel: [ 0.442990] pnp 00:05: [io 0x0070-0x0071] Nov 10 09:47:00 CNC kernel: [ 0.443006] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) Nov 10 09:47:00 CNC kernel: [ 0.443011] pnp 00:06: [io 0x0061] Nov 10 09:47:00 CNC kernel: [ 0.443028] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) Nov 10 09:47:00 CNC kernel: [ 0.443107] pnp 00:07: [io 0x0000-0xffffffff disabled] Nov 10 09:47:00 CNC kernel: [ 0.443109] pnp 00:07: [io 0x02a0-0x02af] Nov 10 09:47:00 CNC kernel: [ 0.443110] pnp 00:07: [io 0x0230-0x023f] Nov 10 09:47:00 CNC kernel: [ 0.443111] pnp 00:07: [io 0x0290-0x029f] Nov 10 09:47:00 CNC kernel: [ 0.443141] system 00:07: [io 0x02a0-0x02af] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443143] system 00:07: [io 0x0230-0x023f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443144] system 00:07: [io 0x0290-0x029f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443145] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:47:00 CNC kernel: [ 0.443264] pnp 00:08: [io 0x0010-0x001f] Nov 10 09:47:00 CNC kernel: [ 0.443265] pnp 00:08: [io 0x0022-0x003f] Nov 10 09:47:00 CNC kernel: [ 0.443266] pnp 00:08: [io 0x0063] Nov 10 09:47:00 CNC kernel: [ 0.443267] pnp 00:08: [io 0x0065] Nov 10 09:47:00 CNC kernel: [ 0.443268] pnp 00:08: [io 0x0067-0x006f] Nov 10 09:47:00 CNC kernel: [ 0.443269] pnp 00:08: [io 0x0072-0x007f] Nov 10 09:47:00 CNC kernel: [ 0.443270] pnp 00:08: [io 0x0080] Nov 10 09:47:00 CNC kernel: [ 0.443270] pnp 00:08: [io 0x0084-0x0086] Nov 10 09:47:00 CNC kernel: [ 0.443271] pnp 00:08: [io 0x0088] Nov 10 09:47:00 CNC kernel: [ 0.443272] pnp 00:08: [io 0x008c-0x008e] Nov 10 09:47:00 CNC kernel: [ 0.443273] pnp 00:08: [io 0x0090-0x009f] Nov 10 09:47:00 CNC kernel: [ 0.443274] pnp 00:08: [io 0x00a2-0x00bf] Nov 10 09:47:00 CNC kernel: [ 0.443275] pnp 00:08: [io 0x00b1] Nov 10 09:47:00 CNC kernel: [ 0.443276] pnp 00:08: [io 0x00e0-0x00ef] Nov 10 09:47:00 CNC kernel: [ 0.443277] pnp 00:08: [io 0x04d0-0x04d1] Nov 10 09:47:00 CNC kernel: [ 0.443278] pnp 00:08: [io 0x040b] Nov 10 09:47:00 CNC kernel: [ 0.443279] pnp 00:08: [io 0x04d6] Nov 10 09:47:00 CNC kernel: [ 0.443281] pnp 00:08: [io 0x0c00-0x0c01] Nov 10 09:47:00 CNC kernel: [ 0.443281] pnp 00:08: [io 0x0c14] Nov 10 09:47:00 CNC kernel: [ 0.443282] pnp 00:08: [io 0x0c50-0x0c51] Nov 10 09:47:00 CNC kernel: [ 0.443283] pnp 00:08: [io 0x0c52] Nov 10 09:47:00 CNC kernel: [ 0.443284] pnp 00:08: [io 0x0c6c] Nov 10 09:47:00 CNC kernel: [ 0.443285] pnp 00:08: [io 0x0c6f] Nov 10 09:47:00 CNC kernel: [ 0.443286] pnp 00:08: [io 0x0cd0-0x0cd1] Nov 10 09:47:00 CNC kernel: [ 0.443287] pnp 00:08: [io 0x0cd2-0x0cd3] Nov 10 09:47:00 CNC kernel: [ 0.443288] pnp 00:08: [io 0x0cd4-0x0cd5] Nov 10 09:47:00 CNC kernel: [ 0.443289] pnp 00:08: [io 0x0cd6-0x0cd7] Nov 10 09:47:00 CNC kernel: [ 0.443290] pnp 00:08: [io 0x0cd8-0x0cdf] Nov 10 09:47:00 CNC kernel: [ 0.443291] pnp 00:08: [io 0x0800-0x089f] Nov 10 09:47:00 CNC kernel: [ 0.443291] pnp 00:08: [io 0x0b00-0x0b0f] Nov 10 09:47:00 CNC kernel: [ 0.443292] pnp 00:08: [io 0x0b20-0x0b3f] Nov 10 09:47:00 CNC kernel: [ 0.443293] pnp 00:08: [io 0x0900-0x090f] Nov 10 09:47:00 CNC kernel: [ 0.443294] pnp 00:08: [io 0x0910-0x091f] Nov 10 09:47:00 CNC kernel: [ 0.443295] pnp 00:08: [io 0x0060-0x005f disabled] Nov 10 09:47:00 CNC kernel: [ 0.443296] pnp 00:08: [io 0x0064-0x0063 disabled] Nov 10 09:47:00 CNC kernel: [ 0.443297] pnp 00:08: [mem 0xfec00000-0xfec00fff] Nov 10 09:47:00 CNC kernel: [ 0.443298] pnp 00:08: [mem 0xfec01000-0xfec01fff] Nov 10 09:47:00 CNC kernel: [ 0.443299] pnp 00:08: [mem 0xfedc0000-0xfedc0fff] Nov 10 09:47:00 CNC kernel: [ 0.443300] pnp 00:08: [mem 0xfee00000-0xfee00fff] Nov 10 09:47:00 CNC kernel: [ 0.443301] pnp 00:08: [mem 0xfed80000-0xfed8ffff] Nov 10 09:47:00 CNC kernel: [ 0.443302] pnp 00:08: [mem 0xfec10000-0xfec10fff] Nov 10 09:47:00 CNC kernel: [ 0.443303] pnp 00:08: [mem 0x00000000-0xffffffff disabled] Nov 10 09:47:00 CNC kernel: [ 0.443305] pnp 00:08: [mem 0xff000000-0xffffffff] Nov 10 09:47:00 CNC kernel: [ 0.443359] system 00:08: [io 0x04d0-0x04d1] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443360] system 00:08: [io 0x040b] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443362] system 00:08: [io 0x04d6] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443363] system 00:08: [io 0x0c00-0x0c01] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443364] system 00:08: [io 0x0c14] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443365] system 00:08: [io 0x0c50-0x0c51] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443367] system 00:08: [io 0x0c52] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443368] system 00:08: [io 0x0c6c] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443369] system 00:08: [io 0x0c6f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443370] system 00:08: [io 0x0cd0-0x0cd1] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443372] system 00:08: [io 0x0cd2-0x0cd3] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443373] system 00:08: [io 0x0cd4-0x0cd5] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443374] system 00:08: [io 0x0cd6-0x0cd7] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443375] system 00:08: [io 0x0cd8-0x0cdf] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443376] system 00:08: [io 0x0800-0x089f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443378] system 00:08: [io 0x0b00-0x0b0f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443379] system 00:08: [io 0x0b20-0x0b3f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443381] system 00:08: [io 0x0900-0x090f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443382] system 00:08: [io 0x0910-0x091f] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443384] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved Nov 10 09:47:00 CNC kernel: [ 0.443385] system 00:08: [mem 0xfec01000-0xfec01fff] could not be reserved Nov 10 09:47:00 CNC kernel: [ 0.443387] system 00:08: [mem 0xfedc0000-0xfedc0fff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443388] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443389] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443391] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443392] system 00:08: [mem 0xff000000-0xffffffff] has been reserved Nov 10 09:47:00 CNC kernel: [ 0.443394] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 10 09:47:00 CNC kernel: [ 0.443689] pnp 00:09: [irq 0 disabled] Nov 10 09:47:00 CNC kernel: [ 0.443696] pnp 00:09: [irq 8] Nov 10 09:47:00 CNC kernel: [ 0.443697] pnp 00:09: [mem 0xfed00000-0xfed003ff] Nov 10 09:47:00 CNC kernel: [ 0.443723] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) Nov 10 09:47:00 CNC kernel: [ 0.443729] pnp: PnP ACPI: found 10 devices Nov 10 09:47:00 CNC kernel: [ 0.443730] ACPI: ACPI bus type pnp unregistered Nov 10 09:47:00 CNC kernel: [ 0.443731] PnPBIOS: Disabled by ACPI PNP Nov 10 09:47:00 CNC kernel: [ 0.479614] pci 0000:02:00.0: PCI bridge to [bus 03-03] Nov 10 09:47:00 CNC kernel: [ 0.479618] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.479625] pci 0000:02:02.0: PCI bridge to [bus 04-04] Nov 10 09:47:00 CNC kernel: [ 0.479627] pci 0000:02:02.0: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479631] pci 0000:02:02.0: bridge window [mem 0xf7300000-0xf73fffff] Nov 10 09:47:00 CNC kernel: [ 0.479637] pci 0000:02:03.0: PCI bridge to [bus 05-05] Nov 10 09:47:00 CNC kernel: [ 0.479646] pci 0000:02:04.0: PCI bridge to [bus 06-06] Nov 10 09:47:00 CNC kernel: [ 0.479655] pci 0000:02:05.0: PCI bridge to [bus 07-07] Nov 10 09:47:00 CNC kernel: [ 0.479664] pci 0000:02:06.0: PCI bridge to [bus 08-08] Nov 10 09:47:00 CNC kernel: [ 0.479673] pci 0000:02:07.0: PCI bridge to [bus 09-09] Nov 10 09:47:00 CNC kernel: [ 0.479676] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff] Nov 10 09:47:00 CNC kernel: [ 0.479682] pci 0000:01:00.2: PCI bridge to [bus 02-09] Nov 10 09:47:00 CNC kernel: [ 0.479684] pci 0000:01:00.2: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479688] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.479694] pci 0000:00:01.3: PCI bridge to [bus 01-09] Nov 10 09:47:00 CNC kernel: [ 0.479695] pci 0000:00:01.3: bridge window [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479697] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff] Nov 10 09:47:00 CNC kernel: [ 0.479701] pci 0000:00:03.1: PCI bridge to [bus 0a-0a] Nov 10 09:47:00 CNC kernel: [ 0.479703] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff] Nov 10 09:47:00 CNC kernel: [ 0.479706] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] Nov 10 09:47:00 CNC kernel: [ 0.479708] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:47:00 CNC kernel: [ 0.479712] pci 0000:00:07.1: PCI bridge to [bus 0b-0b] Nov 10 09:47:00 CNC kernel: [ 0.479714] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff] Nov 10 09:47:00 CNC kernel: [ 0.479717] pci 0000:00:08.1: PCI bridge to [bus 0c-0c] Nov 10 09:47:00 CNC kernel: [ 0.479720] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff] Nov 10 09:47:00 CNC kernel: [ 0.479788] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] Nov 10 09:47:00 CNC kernel: [ 0.479789] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] Nov 10 09:47:00 CNC kernel: [ 0.479790] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] Nov 10 09:47:00 CNC kernel: [ 0.479791] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479792] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] Nov 10 09:47:00 CNC kernel: [ 0.479793] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] Nov 10 09:47:00 CNC kernel: [ 0.479794] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff] Nov 10 09:47:00 CNC kernel: [ 0.479795] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff] Nov 10 09:47:00 CNC kernel: [ 0.479797] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479798] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf75fffff] Nov 10 09:47:00 CNC kernel: [ 0.479799] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479800] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.479801] pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf74fffff] Nov 10 09:47:00 CNC kernel: [ 0.479802] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] Nov 10 09:47:00 CNC kernel: [ 0.479803] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff] Nov 10 09:47:00 CNC kernel: [ 0.479804] pci_bus 0000:09: resource 1 [mem 0xf7200000-0xf72fffff] Nov 10 09:47:00 CNC kernel: [ 0.479805] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] Nov 10 09:47:00 CNC kernel: [ 0.479806] pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff] Nov 10 09:47:00 CNC kernel: [ 0.479807] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] Nov 10 09:47:00 CNC kernel: [ 0.479808] pci_bus 0000:0b: resource 1 [mem 0xf7600000-0xf78fffff] Nov 10 09:47:00 CNC kernel: [ 0.479809] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf79fffff] Nov 10 09:47:00 CNC kernel: [ 0.480120] NET: Registered protocol family 2 Nov 10 09:47:00 CNC kernel: [ 0.480162] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 10 09:47:00 CNC kernel: [ 0.480280] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Nov 10 09:47:00 CNC kernel: [ 0.480394] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Nov 10 09:47:00 CNC kernel: [ 0.480451] TCP: Hash tables configured (established 131072 bind 65536) Nov 10 09:47:00 CNC kernel: [ 0.480452] TCP: reno registered Nov 10 09:47:00 CNC kernel: [ 0.480453] UDP hash table entries: 512 (order: 2, 16384 bytes) Nov 10 09:47:00 CNC kernel: [ 0.480456] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Nov 10 09:47:00 CNC kernel: [ 0.480518] NET: Registered protocol family 1 Nov 10 09:47:00 CNC kernel: [ 0.480616] pci 0000:0a:00.0: Boot video device Nov 10 09:47:00 CNC kernel: [ 0.480760] PCI: CLS 64 bytes, default 64 Nov 10 09:47:00 CNC kernel: [ 0.480781] Unpacking initramfs... Nov 10 09:47:00 CNC kernel: [ 0.639394] Freeing initrd memory: 14256k freed Nov 10 09:47:00 CNC kernel: [ 0.641827] audit: initializing netlink socket (disabled) Nov 10 09:47:00 CNC kernel: [ 0.641839] type=2000 audit(1541843192.504:1): initialized Nov 10 09:47:00 CNC kernel: [ 0.649356] highmem bounce pool size: 64 pages Nov 10 09:47:00 CNC kernel: [ 0.649358] HugeTLB registered 4 MB page size, pre-allocated 0 pages Nov 10 09:47:00 CNC kernel: [ 0.649604] VFS: Disk quotas dquot_6.5.2 Nov 10 09:47:00 CNC kernel: [ 0.649630] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 10 09:47:00 CNC kernel: [ 0.649676] msgmni has been set to 1684 Nov 10 09:47:00 CNC kernel: [ 0.649806] alg: No test for stdrng (krng) Nov 10 09:47:00 CNC kernel: [ 0.649832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Nov 10 09:47:00 CNC kernel: [ 0.649834] io scheduler noop registered Nov 10 09:47:00 CNC kernel: [ 0.649835] io scheduler deadline registered Nov 10 09:47:00 CNC kernel: [ 0.649862] io scheduler cfq registered (default) Nov 10 09:47:00 CNC kernel: [ 0.650383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Nov 10 09:47:00 CNC kernel: [ 0.650391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Nov 10 09:47:00 CNC kernel: [ 0.650392] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Nov 10 09:47:00 CNC kernel: [ 0.650772] GHES: HEST is not enabled! Nov 10 09:47:00 CNC kernel: [ 0.650778] isapnp: Scanning for PnP cards... Nov 10 09:47:00 CNC kernel: [ 1.004827] isapnp: No Plug & Play device found Nov 10 09:47:00 CNC kernel: [ 1.004868] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Nov 10 09:47:00 CNC kernel: [ 1.025624] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 10 09:47:00 CNC kernel: [ 1.026105] Linux agpgart interface v0.103 Nov 10 09:47:00 CNC kernel: [ 1.026213] i8042: PNP: No PS/2 controller found. Probing ports directly. Nov 10 09:47:00 CNC kernel: [ 1.026682] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 10 09:47:00 CNC kernel: [ 1.026693] serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 10 09:47:00 CNC kernel: [ 1.026767] mousedev: PS/2 mouse device common for all mice Nov 10 09:47:00 CNC kernel: [ 1.026828] rtc_cmos 00:05: RTC can wake from S4 Nov 10 09:47:00 CNC kernel: [ 1.027007] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Nov 10 09:47:00 CNC kernel: [ 1.027060] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Nov 10 09:47:00 CNC kernel: [ 1.027145] TCP: cubic registered Nov 10 09:47:00 CNC kernel: [ 1.027230] NET: Registered protocol family 10 Nov 10 09:47:00 CNC kernel: [ 1.027375] Mobile IPv6 Nov 10 09:47:00 CNC kernel: [ 1.027376] NET: Registered protocol family 17 Nov 10 09:47:00 CNC kernel: [ 1.027379] Registering the dns_resolver key type Nov 10 09:47:00 CNC kernel: [ 1.027402] Using IPI No-Shortcut mode Nov 10 09:47:00 CNC kernel: [ 1.027474] PM: Hibernation image not present or could not be loaded. Nov 10 09:47:00 CNC kernel: [ 1.027479] registered taskstats version 1 Nov 10 09:47:00 CNC kernel: [ 1.028035] rtc_cmos 00:05: setting system clock to 2018-11-10 09:46:33 UTC (1541843193) Nov 10 09:47:00 CNC kernel: [ 1.028121] Freeing unused kernel memory: 416k freed Nov 10 09:47:00 CNC kernel: [ 1.028211] Write protecting the kernel text: 3496k Nov 10 09:47:00 CNC kernel: [ 1.028231] Write protecting the kernel read-only data: 984k Nov 10 09:47:00 CNC kernel: [ 1.043607] usbcore: registered new interface driver usbfs Nov 10 09:47:00 CNC kernel: [ 1.043624] usbcore: registered new interface driver hub Nov 10 09:47:00 CNC kernel: [ 1.044023] usbcore: registered new device driver usb Nov 10 09:47:00 CNC kernel: [ 1.044824] xhci_hcd 0000:01:00.0: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.044844] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Nov 10 09:47:00 CNC kernel: [ 1.044850] SCSI subsystem initialized Nov 10 09:47:00 CNC kernel: [ 1.045763] libata version 3.00 loaded. Nov 10 09:47:00 CNC kernel: [ 1.056957] microcode: CPU0: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.062395] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.062494] microcode: CPU1: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.063524] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.063608] microcode: CPU2: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.064710] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.064805] microcode: CPU3: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.065861] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.065947] microcode: CPU4: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.066918] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.067012] microcode: CPU5: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.067947] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.068042] microcode: CPU6: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.068955] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.069054] microcode: CPU7: patch_level=0x08001129 Nov 10 09:47:00 CNC kernel: [ 1.069985] microcode: failed to load file amd-ucode/microcode_amd_fam17h.bin Nov 10 09:47:00 CNC kernel: [ 1.070113] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba Nov 10 09:47:00 CNC kernel: [ 1.100233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:47:00 CNC kernel: [ 1.100236] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.100237] usb usb1: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.100238] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.100240] usb usb1: SerialNumber: 0000:01:00.0 Nov 10 09:47:00 CNC kernel: [ 1.100309] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.100311] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.100326] hub 1-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.100339] hub 1-0:1.0: 14 ports detected Nov 10 09:47:00 CNC kernel: [ 1.100420] xhci_hcd 0000:01:00.0: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.100424] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Nov 10 09:47:00 CNC kernel: [ 1.100448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:47:00 CNC kernel: [ 1.100450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.100451] usb usb2: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.100452] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.100453] usb usb2: SerialNumber: 0000:01:00.0 Nov 10 09:47:00 CNC kernel: [ 1.100496] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.100497] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.100510] hub 2-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.100519] hub 2-0:1.0: 8 ports detected Nov 10 09:47:00 CNC kernel: [ 1.107230] xhci_hcd 0000:03:00.0: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.107243] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 Nov 10 09:47:00 CNC kernel: [ 1.107386] ahci 0000:01:00.1: version 3.0 Nov 10 09:47:00 CNC kernel: [ 1.107448] ahci: SSS flag set, parallel bus scan disabled Nov 10 09:47:00 CNC kernel: [ 1.107511] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode Nov 10 09:47:00 CNC kernel: [ 1.107514] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs apst Nov 10 09:47:00 CNC kernel: [ 1.108069] scsi0 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108190] scsi1 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108250] scsi2 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108311] scsi3 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108374] scsi4 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108442] scsi5 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108501] scsi6 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108558] scsi7 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108612] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108618] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108621] ata3: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580200 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108623] ata4: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580280 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108625] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108627] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108629] ata7: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580400 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108631] ata8: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580480 irq 33 Nov 10 09:47:00 CNC kernel: [ 1.108689] ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Nov 10 09:47:00 CNC kernel: [ 1.108691] ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Nov 10 09:47:00 CNC kernel: [ 1.108817] scsi8 : ahci Nov 10 09:47:00 CNC kernel: [ 1.108862] ata9: SATA max UDMA/133 abar m4096@0xf7908000 port 0xf7908100 irq 42 Nov 10 09:47:00 CNC kernel: [ 1.166201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:47:00 CNC kernel: [ 1.166203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.166204] usb usb3: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.166205] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.166206] usb usb3: SerialNumber: 0000:03:00.0 Nov 10 09:47:00 CNC kernel: [ 1.166272] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.166273] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.166289] hub 3-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.166294] hub 3-0:1.0: 2 ports detected Nov 10 09:47:00 CNC kernel: [ 1.166336] xhci_hcd 0000:03:00.0: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.166339] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 Nov 10 09:47:00 CNC kernel: [ 1.166363] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:47:00 CNC kernel: [ 1.166364] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.166366] usb usb4: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.166367] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.166368] usb usb4: SerialNumber: 0000:03:00.0 Nov 10 09:47:00 CNC kernel: [ 1.166493] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.166494] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.166510] hub 4-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.166515] hub 4-0:1.0: 2 ports detected Nov 10 09:47:00 CNC kernel: [ 1.191366] xhci_hcd 0000:0b:00.3: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.191379] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5 Nov 10 09:47:00 CNC kernel: [ 1.191537] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 Nov 10 09:47:00 CNC kernel: [ 1.191539] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.191541] usb usb5: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.191542] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.191543] usb usb5: SerialNumber: 0000:0b:00.3 Nov 10 09:47:00 CNC kernel: [ 1.191646] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.191647] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.191669] hub 5-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.191674] hub 5-0:1.0: 4 ports detected Nov 10 09:47:00 CNC kernel: [ 1.191754] xhci_hcd 0000:0b:00.3: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.191758] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6 Nov 10 09:47:00 CNC kernel: [ 1.191770] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 Nov 10 09:47:00 CNC kernel: [ 1.191772] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 10 09:47:00 CNC kernel: [ 1.191773] usb usb6: Product: xHCI Host Controller Nov 10 09:47:00 CNC kernel: [ 1.191774] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd Nov 10 09:47:00 CNC kernel: [ 1.191775] usb usb6: SerialNumber: 0000:0b:00.3 Nov 10 09:47:00 CNC kernel: [ 1.191846] xHCI xhci_add_endpoint called for root hub Nov 10 09:47:00 CNC kernel: [ 1.191848] xHCI xhci_check_bandwidth called for root hub Nov 10 09:47:00 CNC kernel: [ 1.191871] hub 6-0:1.0: USB hub found Nov 10 09:47:00 CNC kernel: [ 1.191876] hub 6-0:1.0: 4 ports detected Nov 10 09:47:00 CNC kernel: [ 1.430951] ata9: SATA link down (SStatus 0 SControl 300) Nov 10 09:47:00 CNC kernel: [ 1.598956] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:47:00 CNC kernel: [ 1.601212] ata1.00: supports DRM functions and may not be fully accessible Nov 10 09:47:00 CNC kernel: [ 1.601237] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133 Nov 10 09:47:00 CNC kernel: [ 1.601239] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA Nov 10 09:47:00 CNC kernel: [ 1.601398] ata1.00: supports DRM functions and may not be fully accessible Nov 10 09:47:00 CNC kernel: [ 1.601419] ata1.00: configured for UDMA/133 Nov 10 09:47:00 CNC kernel: [ 1.601717] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 Nov 10 09:47:00 CNC kernel: [ 1.638973] Refined TSC clocksource calibration: 3593.247 MHz. Nov 10 09:47:00 CNC kernel: [ 1.638978] Switching to clocksource tsc Nov 10 09:47:00 CNC kernel: [ 2.091010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 10 09:47:00 CNC kernel: [ 2.094140] ata2.00: ATAPI: ATAPI iHBS112 2, PL06, max UDMA/100 Nov 10 09:47:00 CNC kernel: [ 2.097202] ata2.00: configured for UDMA/100 Nov 10 09:47:00 CNC kernel: [ 2.103451] scsi 1:0:0:0: CD-ROM ATAPI iHBS112 2 PL06 PQ: 0 ANSI: 5 Nov 10 09:47:00 CNC kernel: [ 2.595031] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:47:00 CNC kernel: [ 2.607078] ata3.00: ATA-8: OCZ-VERTEX3, 2.22, max UDMA/133 Nov 10 09:47:00 CNC kernel: [ 2.607081] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:47:00 CNC kernel: [ 2.617016] ata3.00: configured for UDMA/133 Nov 10 09:47:00 CNC kernel: [ 2.617300] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.22 PQ: 0 ANSI: 5 Nov 10 09:47:00 CNC kernel: [ 3.219078] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:47:00 CNC kernel: [ 3.226783] ata4.00: ATA-9: WDC WD60EZRX-00MVLB1, 80.00A80, max UDMA/133 Nov 10 09:47:00 CNC kernel: [ 3.226786] ata4.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:47:00 CNC kernel: [ 3.227408] ata4.00: configured for UDMA/133 Nov 10 09:47:00 CNC kernel: [ 3.227503] scsi 3:0:0:0: Direct-Access ATA WDC WD60EZRX-00M 80.0 PQ: 0 ANSI: 5 Nov 10 09:47:00 CNC kernel: [ 3.547106] ata5: SATA link down (SStatus 0 SControl 300) Nov 10 09:47:00 CNC kernel: [ 4.039147] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Nov 10 09:47:00 CNC kernel: [ 4.039478] ata6.00: ATA-9: M4-CT064M4SSD2, 070H, max UDMA/100 Nov 10 09:47:00 CNC kernel: [ 4.039480] ata6.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 10 09:47:00 CNC kernel: [ 4.039858] ata6.00: configured for UDMA/100 Nov 10 09:47:00 CNC kernel: [ 4.039927] scsi 5:0:0:0: Direct-Access ATA M4-CT064M4SSD2 070H PQ: 0 ANSI: 5 Nov 10 09:47:00 CNC kernel: [ 4.359167] ata7: SATA link down (SStatus 0 SControl 300) Nov 10 09:47:00 CNC kernel: [ 4.679196] ata8: SATA link down (SStatus 0 SControl 300) Nov 10 09:47:00 CNC kernel: [ 4.681988] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) Nov 10 09:47:00 CNC kernel: [ 4.681999] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) Nov 10 09:47:00 CNC kernel: [ 4.682015] sd 3:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) Nov 10 09:47:00 CNC kernel: [ 4.682018] sd 3:0:0:0: [sdc] 4096-byte physical blocks Nov 10 09:47:00 CNC kernel: [ 4.682041] sd 5:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) Nov 10 09:47:00 CNC kernel: [ 4.682045] sd 2:0:0:0: [sdb] Write Protect is off Nov 10 09:47:00 CNC kernel: [ 4.682047] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Nov 10 09:47:00 CNC kernel: [ 4.682050] sd 0:0:0:0: [sda] Write Protect is off Nov 10 09:47:00 CNC kernel: [ 4.682051] sd 3:0:0:0: [sdc] Write Protect is off Nov 10 09:47:00 CNC kernel: [ 4.682054] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Nov 10 09:47:00 CNC kernel: [ 4.682057] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 10 09:47:00 CNC kernel: [ 4.682061] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:47:00 CNC kernel: [ 4.682069] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:47:00 CNC kernel: [ 4.682073] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:47:00 CNC kernel: [ 4.682084] sd 5:0:0:0: [sdd] Write Protect is off Nov 10 09:47:00 CNC kernel: [ 4.682086] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Nov 10 09:47:00 CNC kernel: [ 4.682099] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 10 09:47:00 CNC kernel: [ 4.682517] sdd: sdd1 sdd2 < sdd5 > Nov 10 09:47:00 CNC kernel: [ 4.682677] sd 5:0:0:0: [sdd] Attached SCSI disk Nov 10 09:47:00 CNC kernel: [ 4.683617] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 10 09:47:00 CNC kernel: [ 4.683643] sr 1:0:0:0: Attached scsi generic sg1 type 5 Nov 10 09:47:00 CNC kernel: [ 4.683663] sd 2:0:0:0: Attached scsi generic sg2 type 0 Nov 10 09:47:00 CNC kernel: [ 4.683682] sd 3:0:0:0: Attached scsi generic sg3 type 0 Nov 10 09:47:00 CNC kernel: [ 4.683701] sd 5:0:0:0: Attached scsi generic sg4 type 0 Nov 10 09:47:00 CNC kernel: [ 4.684065] sda: sda1 sda2 Nov 10 09:47:00 CNC kernel: [ 4.684217] sd 0:0:0:0: [sda] Attached SCSI disk Nov 10 09:47:00 CNC kernel: [ 4.685017] sdb: sdb1 sdb2 sdb3 Nov 10 09:47:00 CNC kernel: [ 4.685145] sd 2:0:0:0: [sdb] Attached SCSI disk Nov 10 09:47:00 CNC kernel: [ 4.687941] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Nov 10 09:47:00 CNC kernel: [ 4.687945] cdrom: Uniform CD-ROM driver Revision: 3.20 Nov 10 09:47:00 CNC kernel: [ 4.688066] sr 1:0:0:0: Attached scsi CD-ROM sr0 Nov 10 09:47:00 CNC kernel: [ 4.745439] sdc: sdc1 Nov 10 09:47:00 CNC kernel: [ 4.745751] sd 3:0:0:0: [sdc] Attached SCSI disk Nov 10 09:47:00 CNC kernel: [ 6.299263] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:47:00 CNC kernel: [ 6.299271] hub 1-0:1.0: couldn't allocate port 5 usb_device Nov 10 09:47:00 CNC kernel: [ 11.299694] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:47:00 CNC kernel: [ 11.299700] hub 1-0:1.0: couldn't allocate port 11 usb_device Nov 10 09:47:00 CNC kernel: [ 16.300056] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:47:00 CNC kernel: [ 16.300062] hub 1-0:1.0: couldn't allocate port 12 usb_device Nov 10 09:47:00 CNC kernel: [ 21.300353] xhci_hcd 0000:01:00.0: Timeout while waiting for a slot Nov 10 09:47:00 CNC kernel: [ 21.300359] hub 1-0:1.0: couldn't allocate port 13 usb_device Nov 10 09:47:00 CNC kernel: [ 26.300691] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot Nov 10 09:47:00 CNC kernel: [ 26.300702] hub 3-0:1.0: couldn't allocate port 2 usb_device Nov 10 09:47:00 CNC kernel: [ 26.344372] PM: Starting manual resume from disk Nov 10 09:47:00 CNC kernel: [ 26.344375] PM: Hibernation image partition 8:53 present Nov 10 09:47:00 CNC kernel: [ 26.344376] PM: Looking for hibernation image. Nov 10 09:47:00 CNC kernel: [ 26.344520] PM: Image not found (code -22) Nov 10 09:47:00 CNC kernel: [ 26.344522] PM: Hibernation image not present or could not be loaded. Nov 10 09:47:00 CNC kernel: [ 26.349382] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) Nov 10 09:47:00 CNC kernel: [ 26.412369] usb 5-3: new full-speed USB device number 2 using xhci_hcd Nov 10 09:47:00 CNC kernel: [ 26.454675] usb 5-3: New USB device found, idVendor=1a86, idProduct=7523 Nov 10 09:47:00 CNC kernel: [ 26.454677] usb 5-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Nov 10 09:47:00 CNC kernel: [ 26.454679] usb 5-3: Product: USB2.0-Serial Nov 10 09:47:00 CNC kernel: [ 26.496484] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Nov 10 09:47:00 CNC kernel: [ 26.496490] ACPI: Power Button [PWRB] Nov 10 09:47:00 CNC kernel: [ 26.496535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Nov 10 09:47:00 CNC kernel: [ 26.496538] ACPI: Power Button [PWRF] Nov 10 09:47:00 CNC kernel: [ 26.498362] wmi: Mapper loaded Nov 10 09:47:00 CNC kernel: [ 26.529473] [drm] Initialized drm 1.1.0 20060810 Nov 10 09:47:00 CNC kernel: [ 26.529679] hda_intel: Disabling MSI Nov 10 09:47:00 CNC kernel: [ 26.530165] asus_wmi: ASUS WMI generic driver loaded Nov 10 09:47:00 CNC kernel: [ 26.531335] asus_wmi: Initialization: 0x0 Nov 10 09:47:00 CNC kernel: [ 26.531355] asus_wmi: BIOS WMI version: 0.9 Nov 10 09:47:00 CNC kernel: [ 26.531389] asus_wmi: SFUN value: 0x0 Nov 10 09:47:00 CNC kernel: [ 26.531665] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2 Nov 10 09:47:00 CNC kernel: [ 26.536209] MXM: GUID detected in BIOS Nov 10 09:47:00 CNC kernel: [ 26.540956] usbcore: registered new interface driver usbserial Nov 10 09:47:00 CNC kernel: [ 26.540968] usbcore: registered new interface driver usbserial_generic Nov 10 09:47:00 CNC kernel: [ 26.540976] USB Serial support registered for generic Nov 10 09:47:00 CNC kernel: [ 26.540987] usbserial: USB Serial Driver core Nov 10 09:47:00 CNC kernel: [ 26.542555] usbcore: registered new interface driver ch341 Nov 10 09:47:00 CNC kernel: [ 26.542565] USB Serial support registered for ch341-uart Nov 10 09:47:00 CNC kernel: [ 26.542572] ch341 5-3:1.0: ch341-uart converter detected Nov 10 09:47:00 CNC kernel: [ 26.568736] usb 5-3: ch341-uart converter now attached to ttyUSB0 Nov 10 09:47:00 CNC kernel: [ 26.913315] [drm] nouveau 0000:0a:00.0: Detected an NV20 generation card (0x124020a1) Nov 10 09:47:00 CNC kernel: [ 26.914078] [drm] nouveau 0000:0a:00.0: Checking PRAMIN for VBIOS Nov 10 09:47:00 CNC kernel: [ 26.914082] [drm] nouveau 0000:0a:00.0: ... BIOS signature not found Nov 10 09:47:00 CNC kernel: [ 26.914083] [drm] nouveau 0000:0a:00.0: Checking PROM for VBIOS Nov 10 09:47:00 CNC kernel: [ 27.035759] [drm] nouveau 0000:0a:00.0: ... appears to be valid Nov 10 09:47:00 CNC kernel: [ 27.035760] [drm] nouveau 0000:0a:00.0: Using VBIOS from PROM Nov 10 09:47:00 CNC kernel: [ 27.035762] [drm] nouveau 0000:0a:00.0: BIT BIOS found Nov 10 09:47:00 CNC kernel: [ 27.035764] [drm] nouveau 0000:0a:00.0: Bios version 84.04.36.00 Nov 10 09:47:00 CNC kernel: [ 27.035766] [drm] nouveau 0000:0a:00.0: TMDS table version 2.0 Nov 10 09:47:00 CNC kernel: [ 27.035766] [drm] nouveau 0000:0a:00.0: Do not understand BIT U table Nov 10 09:47:00 CNC kernel: [ 27.035836] [drm] nouveau 0000:0a:00.0: DCB version 0x41 unknown Nov 10 09:47:00 CNC kernel: [ 27.162389] Adding 2579452k swap on /dev/sdd5. Priority:-1 extents:1 across:2579452k SS Nov 10 09:47:00 CNC kernel: [ 27.169088] EXT4-fs (sdd1): re-mounted. Opts: (null) Nov 10 09:47:00 CNC kernel: [ 27.197361] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro Nov 10 09:47:00 CNC kernel: [ 27.206405] loop: module loaded Nov 10 09:47:00 CNC kernel: [ 27.464024] RPC: Registered named UNIX socket transport module. Nov 10 09:47:00 CNC kernel: [ 27.464026] RPC: Registered udp transport module. Nov 10 09:47:00 CNC kernel: [ 27.464027] RPC: Registered tcp transport module. Nov 10 09:47:00 CNC kernel: [ 27.464028] RPC: Registered tcp NFSv4.1 backchannel transport module. Nov 10 09:47:00 CNC kernel: [ 27.466857] FS-Cache: Loaded Nov 10 09:47:00 CNC kernel: [ 27.470241] NFS: Registering the id_resolver key type Nov 10 09:47:00 CNC kernel: [ 27.470249] FS-Cache: Netfs 'nfs' registered for caching Nov 10 09:47:00 CNC kernel: [ 27.472618] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Nov 10 09:47:00 CNC acpid: starting up with netlink and the input layer Nov 10 09:47:00 CNC anacron[2786]: Anacron 2.3 started on 2018-11-10 Nov 10 09:47:00 CNC anacron[2786]: Will run job `cron.daily' in 5 min. Nov 10 09:47:00 CNC anacron[2786]: Will run job `cron.weekly' in 10 min. Nov 10 09:47:00 CNC anacron[2786]: Will run job `cron.monthly' in 15 min. Nov 10 09:47:00 CNC anacron[2786]: Jobs will be executed sequentially Nov 10 09:47:00 CNC /usr/sbin/cron[2800]: (CRON) INFO (pidfile fd = 3) Nov 10 09:47:00 CNC /usr/sbin/cron[2823]: (CRON) STARTUP (fork ok) Nov 10 09:47:00 CNC /usr/sbin/cron[2823]: (CRON) INFO (Running @reboot jobs) Nov 10 09:47:00 CNC acpid: 44 rules loaded Nov 10 09:47:00 CNC acpid: waiting for events: event logging is off Nov 10 09:47:00 CNC avahi-daemon[3240]: Found user 'avahi' (UID 106) and group 'avahi' (GID 116). Nov 10 09:47:00 CNC avahi-daemon[3240]: Successfully dropped root privileges. Nov 10 09:47:00 CNC avahi-daemon[3240]: avahi-daemon 0.6.31 starting up. Nov 10 09:47:00 CNC avahi-daemon[3240]: Successfully called chroot(). Nov 10 09:47:00 CNC avahi-daemon[3240]: Successfully dropped remaining capabilities. Nov 10 09:47:00 CNC bluetoothd[3251]: Bluetooth daemon 4.99 Nov 10 09:47:00 CNC avahi-daemon[3240]: Loading service file /services/udisks.service. Nov 10 09:47:00 CNC avahi-daemon[3240]: Network interface enumeration completed. Nov 10 09:47:00 CNC avahi-daemon[3240]: Registering HINFO record with values 'I686'/'LINUX'. Nov 10 09:47:00 CNC avahi-daemon[3240]: Server startup complete. Host name is CNC.local. Local service cookie is 3884608334. Nov 10 09:47:00 CNC avahi-daemon[3240]: Service "CNC" (/services/udisks.service) successfully established. Nov 10 09:47:00 CNC bluetoothd[3251]: Starting SDP server Nov 10 09:47:00 CNC kernel: [ 27.826283] Bluetooth: Core ver 2.16 Nov 10 09:47:00 CNC kernel: [ 27.826293] NET: Registered protocol family 31 Nov 10 09:47:00 CNC kernel: [ 27.826295] Bluetooth: HCI device and connection manager initialized Nov 10 09:47:00 CNC kernel: [ 27.826296] Bluetooth: HCI socket layer initialized Nov 10 09:47:00 CNC kernel: [ 27.826297] Bluetooth: L2CAP socket layer initialized Nov 10 09:47:00 CNC kernel: [ 27.826300] Bluetooth: SCO socket layer initialized Nov 10 09:47:00 CNC kernel: [ 27.829194] Bluetooth: RFCOMM TTY layer initialized Nov 10 09:47:00 CNC kernel: [ 27.829198] Bluetooth: RFCOMM socket layer initialized Nov 10 09:47:00 CNC kernel: [ 27.829200] Bluetooth: RFCOMM ver 1.11 Nov 10 09:47:00 CNC bluetoothd[3251]: Failed to init alert plugin Nov 10 09:47:00 CNC bluetoothd[3251]: Failed to init time plugin Nov 10 09:47:00 CNC NetworkManager[3377]: <info> NetworkManager (version 0.9.4.0) is starting... Nov 10 09:47:00 CNC NetworkManager[3377]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Nov 10 09:47:00 CNC bluetoothd[3251]: Failed to init gatt_example plugin Nov 10 09:47:00 CNC kernel: [ 27.838416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Nov 10 09:47:00 CNC kernel: [ 27.838449] Bluetooth: BNEP filters: protocol multicast Nov 10 09:47:00 CNC kernel: [ 27.839510] lp: driver loaded but no devices found Nov 10 09:47:00 CNC kernel: [ 27.841084] ppdev: user-space parallel port driver Nov 10 09:47:00 CNC udev-configure-printer: add /module/lp Nov 10 09:47:00 CNC udev-configure-printer: Failed to get parent Nov 10 09:47:00 CNC dbus[3017]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper) Nov 10 09:47:00 CNC polkitd[3459]: started daemon version 0.105 using authority implementation `local' version `0.105' Nov 10 09:47:00 CNC dbus[3017]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: init! Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: update_system_hostname Nov 10 09:47:00 CNC NetworkManager[3377]: SCPluginIfupdown: management mode: unmanaged Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: end _init. Nov 10 09:47:00 CNC NetworkManager[3377]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Nov 10 09:47:00 CNC NetworkManager[3377]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Nov 10 09:47:00 CNC NetworkManager[3377]: Ifupdown: get unmanaged devices count: 0 Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: (168009400) ... get_connections. Nov 10 09:47:00 CNC NetworkManager[3377]: SCPlugin-Ifupdown: (168009400) ... get_connections (managed=false): return empty list. Nov 10 09:47:00 CNC NetworkManager[3377]: keyfile: parsing Wired connection 1 ... Nov 10 09:47:00 CNC NetworkManager[3377]: keyfile: read connection 'Wired connection 1' Nov 10 09:47:00 CNC NetworkManager[3377]: Ifupdown: get unmanaged devices count: 0 Nov 10 09:47:00 CNC NetworkManager[3377]: <info> trying to start the modem manager... Nov 10 09:47:00 CNC dbus[3017]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper) Nov 10 09:47:00 CNC NetworkManager[3377]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 10 09:47:00 CNC NetworkManager[3377]: <info> monitoring ifupdown state file '/run/network/ifstate'. Nov 10 09:47:00 CNC NetworkManager[3377]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 10 09:47:00 CNC NetworkManager[3377]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 10 09:47:00 CNC NetworkManager[3377]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 10 09:47:00 CNC NetworkManager[3377]: <info> Networking is enabled by state file Nov 10 09:47:00 CNC acpid: client connected from 3441[0:0] Nov 10 09:47:00 CNC acpid: 1 client rule loaded Nov 10 09:47:00 CNC modem-manager[3498]: <info> ModemManager (version 0.5.2.0) starting... Nov 10 09:47:00 CNC dbus[3017]: [system] Successfully activated service 'org.freedesktop.ModemManager' Nov 10 09:47:00 CNC NetworkManager[3377]: <info> modem-manager is now available Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Generic Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Samsung Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Ericsson MBM Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Huawei Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Novatel Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin SimTech Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Nokia Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Option Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin ZTE Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Sierra Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Gobi Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin X22X Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Longcheer Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin AnyData Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin MotoC Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Wavecom Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Linktop Nov 10 09:47:00 CNC modem-manager[3498]: <info> Loaded plugin Option High-Speed Nov 10 09:47:01 CNC dbus[3017]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper) Nov 10 09:47:01 CNC kernel: [ 28.758376] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input3 Nov 10 09:47:01 CNC dbus[3017]: [system] Successfully activated service 'org.freedesktop.ConsoleKit' Nov 10 09:47:01 CNC dbus[3017]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Nov 10 09:47:01 CNC dbus[3017]: [system] Successfully activated service 'org.freedesktop.UDisks' Nov 10 09:47:01 CNC dbus[3017]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper) Nov 10 09:47:01 CNC dbus[3017]: [system] Successfully activated service 'org.freedesktop.UPower' Nov 10 09:47:01 CNC anacron[3842]: Anacron 2.3 started on 2018-11-10 Nov 10 09:47:01 CNC anacron[3842]: Will run job `cron.daily' in 5 min. Nov 10 09:47:01 CNC anacron[3842]: Will run job `cron.weekly' in 10 min. Nov 10 09:47:01 CNC anacron[3842]: Will run job `cron.monthly' in 15 min. Nov 10 09:47:01 CNC anacron[3842]: Jobs will be executed sequentially Nov 10 09:47:02 CNC dbus[3017]: [system] Activating service name='org.debian.apt' (using servicehelper) Nov 10 09:47:02 CNC AptDaemon: INFO: Initializing daemon Nov 10 09:47:02 CNC dbus[3017]: [system] Successfully activated service 'org.debian.apt'