Linux Startet in der Eingabeaufforderung

More
3 years 4 months ago #272730 by Muecke
Im TV kann ich kein Verzeichnis wählen.
Die Verbindung wurde abgelehnt

Please Log in to join the conversation.

More
3 years 4 months ago #272731 by Muecke
Bekomme ich das Problem gelöst wenn ich neu installieren würde ?

Dann mache ich das, ist wahrscheinlich das schnellste.
Die CNC Maschine muss so oder so neu gemacht werden

Please Log in to join the conversation.

More
3 years 4 months ago #272732 by spicer
Hmm, ist auch merkwürdig, dass TV überhaupt etwas zeigt. Weil ja keine GUI läuft.
Ohne Syslog wird's schwierig.
Bin dann leider raus.

Please Log in to join the conversation.

More
3 years 4 months ago #272734 by spicer

Bekomme ich das Problem gelöst wenn ich neu installieren würde ?

Dann mache ich das, ist wahrscheinlich das schnellste.
Die CNC Maschine muss so oder so neu gemacht werden

Wenn du vorher die conf Files alle backupst, ja.

Please Log in to join the conversation.

More
3 years 4 months ago #272735 by Muecke
OK dann wird neu installiert, oh man was für ein Albtraum

Please Log in to join the conversation.

More
3 years 4 months ago #272736 by spicer
Mit suchen im syslog hätte man wahrscheinlich den Fehler gefunden.
Aber wenn's nur ein kleiner Aufwand ist, dann ist neu installieren schneller.

Please Log in to join the conversation.

More
3 years 4 months ago #272737 by Muecke
Interessant wäre es ja schon was der Fehler ist.

Wie sich das jetzt aber verstanden habe wie ich in diesem Terminal diese Datei daraus bekommen habe ich wahrscheinlich schneller neu installiert.

Auch wenn die neue Installation mich graust

Please Log in to join the conversation.

More
3 years 4 months ago #272738 by spicer
Kannst mir ja mal die TV Daten senden per PN.
Das Passwort für's LinuxCNC müsste ich aber auch haben.

Please Log in to join the conversation.

More
3 years 4 months ago #272739 by spicer
Einen USB Stick könntest dann auch noch stecken. So kann ich wenigstens das home Verzeichnis da drauf schreiben.

Please Log in to join the conversation.

More
3 years 4 months ago #272740 by Muecke
Kann ich gerne machen sobald ich wieder zu Hause bin

PN funktionieren hier in diesem Forum nicht.

Please Log in to join the conversation.

Time to create page: 0.090 seconds
Powered by Kunena Forum