MSG in G Code

Tchefter
Topic Author
Offline
Elite Member

3 years 2 months ago #279385 by Tchefter

MSG in G Code was created by Tchefter

Hallo Zusammen,
ich will mir zu Anfang jeden Programms eine Nachricht vor dem Start anzeigen lassen.
Über MSG funktioniert das ja bestens. Die Nachricht wird allerdings rechts unten an den Bildschirm geklebt.
Kann man das in irgendeiner Form zentrieren?

Gruß Fritz

### Google Translate ###

Hello everyone,
I want to have a message displayed before the start of each program at the beginning of each program.
It works really well with MSG. However, the message is pasted to the bottom right of the screen.
Can this be centered in any way?

Greetings Fritz

Please Log in to join the conversation.

MaHa
Offline
Platinum Member

3 years 2 months ago #279388 by MaHa

Replied by MaHa on topic MSG in G Code

Move Notifications from Bottom Right (SE)

axis (py) found in /usr/bin/

about Line 337

from:

Code:

self.place(relx=1, rely=1, y=-20, anchor="se")

to:

Code:

self.place(relx=1, rely=1, x=-289, y=-20, anchor="se")

Attachment not found

Please Log in to join the conversation.

Tchefter
Topic Author
Offline
Elite Member

3 years 2 months ago #279396 by Tchefter

Replied by Tchefter on topic MSG in G Code

Works perfect, thanks a lot

Please Log in to join the conversation.

Tchefter
Topic Author
Offline
Elite Member

3 years 2 months ago #279402 by Tchefter

Replied by Tchefter on topic MSG in G Code

A Question again:
Is there a Documentation for the axis.py?
i.e. Change the MSG Size, colouring or else?

Please Log in to join the conversation.

Time to create page: 0.116 seconds