Welche Tasten haben die Achsen?

More
2 years 2 weeks ago #312287 by Muecke
Hallo zusammen,

ich habe gerade zufällig bemerkt, dass ich mich mit den Pfeiltasten auf der Tastatur bewegen kann (oben unten) [Achse Y] (links rechts) [Achse X], wie kann ich herausfinden, welche Tasten die Achse C bei mir hat?

Ich habe eine XYZC Maschine.

Gruß Mücke

Please Log in to join the conversation.

More
2 years 2 weeks ago #312289 by Aciera
Wenn ich mich recht errinnere werden normalerweise
Code:
'[' und ']'
für die 4. Achse verwendet.
Kann man glaub ich auch im Menü nachschauen: 'Help' > 'Quick Reference'[/code]

Please Log in to join the conversation.

More
2 years 2 weeks ago #312290 by tommylight
Try [ ]
Those are usually the 4'th axis.

Please Log in to join the conversation.

More
2 years 1 week ago #312369 by Muecke
Auf die Gefahr hin das ihr mich für ... haltet.
Doch welche Tasten sind denn bitte [ und ] bei mir bewegt sich da nichts :-(

in der Hilfe steht es jedoch auch so drin.

Please Log in to join the conversation.

More
2 years 1 week ago #312375 by Aciera
Ja. haste Recht. Geht nicht.

Please Log in to join the conversation.

More
2 years 1 week ago #312382 by tommylight
Usually last two buttons before ENTER, upper row.

Please Log in to join the conversation.

More
2 years 1 week ago #312383 by Muecke
Kann man die Tasten auch selbst belegen?

@ tommylight
Welche genau?
 

Attachment not found

Please Log in to join the conversation.

More
2 years 1 week ago #312387 by tommylight
U mit zwei punkte unde die mit + - geschrieben unten aber im gleiche horizontal linie.

Please Log in to join the conversation.

More
2 years 1 week ago #312388 by Muecke
Meinst du diese?

Attachment not found

Please Log in to join the conversation.

More
2 years 1 week ago #312389 by tommylight

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.061 seconds
Powered by Kunena Forum