Welche Tasten haben die Achsen?

Caps_Lock muss aus sein.

@tommylight, what version of lcnc does this work on for you? Does not seem to work for me in '9axis'-sim in either 2.9 nor master.

From 2.7 to 2.9.2, using Axis GUI.
I always use USA standard keyboard keymap, i never ever change that, i had to learn every key on the keyboard as using several PC's and laptops daily with changed keymap was a horror !
Edit:
Just tested on 2.10, also works moving A axis.

Das funktioniert bei mir nicht ich kann die C-Achse nicht mit der Tastatur bewegen

Did you try to add the standard USA keymap?
No idea how to do that so use google, please.

Du kannst die Tasten auch selber zuordnen:
forum.linuxcnc.org/21-axis/46689-how-to-...on-keys-on-ui#250075

Hab ich aber auch noch nie gemacht, weil ich keine Tastatur Shortcuts nutze.

@tommylight
Do you have a Ascii Code for the Signs to move the C-Axis?
So, i think, it must be possible to search for the Signs on DE Keyboard.

Menu>preferences>keyboard>Layouts tab, add
there add "English (US)" layout, a bit lower check if the "keyboard model" is "generic 105 key PC" and change if not, close.
Now there should be a little icon on the lower right side with US or DE in it, click on it and change to US, try jogging with []
-
@Tchefer,
No, and i can not find it now, will have ask google later and report back.

- de
Ich probiere es aus, wenn ich wieder an der Maschine bin, indem ich versuche, neue Tasten für die C-Achse zu belegen!- en
I'll try it out when I get back to the machine by trying to assign new buttons for the C axis!