Frage wegen Spindelencoder an 7i76

If you figure out which input does not work, if you have a voltmeter or just an LED
you can trace the signal at the 7I76's  DB25 connector to see if the issue is with the
7I76 or 7I92.
 

PCW wrote:

If you figure out which input does not work, if you have a voltmeter or just an LED
you can trace the signal at the 7I76's  DB25 connector to see if the issue is with the
7I76 or 7I92.

 

 

Can I plug the 7i92TM directly into the 7i76, i.e. the DB25 connectors into each other? Perhaps the ribbon cable or the connection to the plugs is defective.

Yes, you can plug them directly together.

Thank you, I'll try it tomorrow 

Nun habe ich die 7i92 direkt in die 7i76 gesteckt und schau an, der Encoder 04 funktioniert jetzt auch auf der 7i76.
Da habe ich wohl beim Crimpen nicht sauber genug gearbeitet 
So wie es jetzt ist, bleibt es auch.
Danke nochmals für eure Hilfe 

Gruß
Olli



Now I have plugged the 7i92 directly into the 7i76 and look, the encoder 04 now also works on the 7i76.
I must not have done a clean enough job when crimping 
It will stay as it is now.
Thanks again for your help 

Greetings
Olli

Danke fur die ruckmeldung.
Is that written correctly? I need more practice as i do not want to forget German.

tommylight wrote:

Danke fur die ruckmeldung.
Is that written correctly? I need more practice as i do not want to forget German.

für die Rückmeldung   üüüüüüüü