Basic Pendant with 7i73

rodw,

Will that work on axis as well? I often forget to switch out of the mdi tab before jogging. I don't have room for another switch, how about adding the teleop to my axis select switch in hal so I can toggle that to get me into jog mode?

Mike_Eitel,

Have to draw the symbolic and probably try to get them laser printed on aluminium foil.
Mike

Nice control panel. I'm curious on your process for adding the graphics. All my panels are stainless and need labeling of sorts. I'm looking for professional looking results and they are already mounted so laser marking is out. What do you guys recommend? Sorry to getting a bit off topic here...

OT-CNC wrote: rodw,

Will that work on axis as well? I often forget to switch out of the mdi tab before jogging. I don't have room for another switch, how about adding the teleop to my axis select switch in hal so I can toggle that to get me into jog mode?

Yes, it works fie with axis so any method to trigger a pin value in hal would work.

the risk on this might be to get a loop and the pendant stands out
as you may turn the switch in undifined cases