Glade 3.8.5 and LinuxCNC RIP build: how to install the catalog?

islander261
Offline
Platinum Member

9 years 10 months ago #83719 by islander261

Replied by islander261 on topic Glade 3.8.5 and LinuxCNC RIP build: how to install the catalog?

Hello
I just want to report that I finally got all the HAL widgets to work with my Glade 3.8.5 install. In addition to doing this:

Code:

You need to copy all files from
linuxcnc-dev/lib/python/gladevcp
to
/usr/lib/pymodules/python2.7/gladevcp
and
/usr/share/pyshared/gladevcp

I also needed to do this:

Code:

sudo cp ~/linuxcnc-dev/lib/python/gladevcp/*.xml usr/local/share/glade3/catalogs

As well as:

Code:

[sudo cp ~/linuxcnc-dev/lib/python/gladevcp/*.png usr/local/share/glade3/pixmaps

I still can't start Glade from the terminal with the glade-gtk2 command but glade-3 works for now.

Please Log in to join the conversation.

kpj10
Offline
Junior Member

8 years 5 months ago #110231 by kpj10

Replied by kpj10 on topic Glade 3.8.5 and LinuxCNC RIP build: how to install the catalog?

Add the LinuxCNC stuff to the GLADE_CATALOG_SEARCH_PATH: export GLADE_CATALOG_SEARCH_PATH=~/linuxcnc-dev/lib/python/gladevcp

I didn't get where to put this. I'm using Ubuntu 14.04, simulation installation.

I tried writing this in my /etc/environment file but still there is catalogue not found error.

Hope for your help,
Thank you
Kunal.

Please Log in to join the conversation.

thang
Offline
Elite Member

8 years 5 months ago #110414 by thang

Replied by thang on topic Glade 3.8.5 and LinuxCNC RIP build: how to install the catalog?

kpj10 wrote: Add the LinuxCNC stuff to the GLADE_CATALOG_SEARCH_PATH: export GLADE_CATALOG_SEARCH_PATH=~/linuxcnc-dev/lib/python/gladevcp

I didn't get where to put this. I'm using Ubuntu 14.04, simulation installation.

Kunal.

Just do this command in terminal :
export GLADE_CATALOG_SEARCH_PATH=~/linuxcnc-dev/lib/python/gladevcp

Please Log in to join the conversation.

Time to create page: 0.087 seconds