Switch mode MANUAL / MDI

Hello, I have build my first glade panel. It makes almost all what I need, but....

1. When I press button the ngc is done but AXIS stay at MDI mode, how to do switch to MANUAL (F3) itself?

2. How to do homing X, Y by one button (machine has limit switch on X and Y)?

thank you

Karel

I think you would need to do this in the event handling code.

Have you seen this manual page?
linuxcnc.org/docs/2.7/html/config/python-interface.html

This M Code does the job for me:

If I rund the code via the mdi it works about 9 times out of 10. Is there something wrong with the code?

Best wishes

Jan