Glade 3.20.will not work with LinuxCNC , please follow this for 3.8.6

Looks like a major surgery on a wheezy install.

However, I finally hit the magic twanger last night, and with one remaining niggle, its working at any screen size I can muster up on a 1920 display.

Near the bottom of the xml file saved by glade-gtk2 from the 3.80 release, there were a couple "placeholders" defined. Using geany, I nuked them, and that got rid of the error exit. The remaining niggle is that at certain screen sizes and aspect ratios, it jiggles like a cold bowl of jello. Adjust the axis window a couple pixels either way and its dead stable. I can live with that. Now all I need to do is fine tune the #99 tool, and learn how to use the rest of the center and/or align stuff.

Thank you very much for the reply Norbert, its much appreciated.

Cheers, gene83

Finally i reinstalled glade 3.20 and followed newbynoby's instructions
Only:
First time command glade-3. throws:
libgladeui-1.so.11 cannot open shared objevt file: No such file or directory.

So how to proceed?

Thx Mike

Coud this be a save starting Point, and what to do?
opensuse.pkgs.org/42.3/opensuse-oss/libg...-9.2.x86_64.rpm.html

Hallo Mike,

you have missed the notice, that all glade after 3.8.6 will not work with glade-gtk2!
So please install latest 3.8.6 not any later releases.

Norbert

Hi Norbert
I deinstalled the 3.20, as proposed after my "downgrade glade" post,
Then I followed your description, earlier in this post here, by copy paste.
Saw no errors,
But when I first typed glade-3 i got: ibgladeui-1.so.11 cannot open s......

So any Idea what i should do now?

PS.
And I understood from cmorley's post that it is gtk2 and that it is handled till 3.8.6.
and that Gtk3 is not supported.
Mike

in a terminal type glade-gtk2 <enter>

If glade loads then you have a compatible version.

try:

Norbert

does not find pack:

cnc@MeBigCNC3:~$ sudo apt-get install libgladeui-1-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket libgladeui-1-dev kann nicht gefunden werden.
cnc@MeBigCNC3:~$ ^C

What distro?

Norbert

stretch

BUT ...
DO NOT ASK ME WHY

When I chose glade from the menu it starts now.

HUREEEY

THX