GLADE Signals IN and OUT - Buttons won't work.

More
7 years 4 months ago #138014 by dangu85
Replied by dangu85 on topic GLADE Signals IN and OUT - Resolved
It works!! Thanks soo much!
Anyway, to call an .ngc subroutine with a button click is it the same as it was in pyvcp?
I'm planning to add a gui in axis with a few buttons, status leds and quick g-coded routines such as touch probe, etc..

Please Log in to join the conversation.

More
7 years 4 months ago #138017 by cmorley
Replied by cmorley on topic GLADE Signals IN and OUT - Resolved
linuxcnc.org/docs/devel/html/gui/gladevc...d_action_mdi_widgets

Please Log in to join the conversation.

Time to create page: 0.036 seconds
Powered by Kunena Forum