Choose a file from folder using "file chooser button" or other widget

import hal import glib import time class HandlerClass: ''' class with gladevcp callback handlers ''' def on_button_press(self,widget,data=None): self.vcp_filechooserbutton2.set_current_folder('/home/sr/folder1/new') self.vcp_filechooserbutton1.set_current_folder('/home/sr/folder2/old') ''' a callback method parameters are: the generating object instance, likte a GtkButton instance user data passed if any - this is currently unused but the convention should be retained just in case ''' print "on_button_press called" self.nhits += 1 self.builder.get_object('hits').set_label("Hits: %d" % (self.nhits)) def __init__(self, halcomp,builder,useropts): /* these code is more longer ... is from gladepvc example and I modify only those 2 button*/

linuxcnc-dev/bin/gladevcp:214: RuntimeWarning: missing handler 'hal_hscale_delay_destroy' builder.connect_signals(handlers)

def on_par_destroy(self,obj,data=None): self.ini.save_state(self)

import hal import glib import time import gtk import gtk.glade import gobject import os class HandlerClass: ''' class with gladevcp callback handlers ''' def on_button_press(widget,data=None): ''' a callback method parameters are: the generating object instance, likte a GtkButton instance user data passed if any - this is currently unused but the convention should be retained just in case ''' print "on_button_press called" self.nhits += 1 self.builder.get_object('hits').set_label("Hits: %d" % (self.nhits)) def on_window1_destroy_event(widget, data=None): gtk.main_quit() def on_notebook1_destroy(self,obj,data=None): self.ini.save_state(self) def __init__(self, halcomp,builder,useropts): ''' Handler classes are instantiated in the following state: - the widget tree is created, but not yet realized (no toplevel window.show() executed yet) - the halcomp HAL component is set up and the widhget tree's HAL pins have already been added to it - it is safe to add more hal pins because halcomp.ready() has not yet been called at this point. after all handlers are instantiated in command line and get_handlers() order, callbacks will be connected with connect_signals()/signal_autoconnect() The builder may be either of libglade or GtkBuilder type depending on the glade file format. ''' self.halcomp = halcomp self.builder = builder self.nhits = 0 builder.get_object('vcp_filechooserbutton1').set_current_folder(os.path.expanduser('~/home/PC/FOLDER1/')) builder.get_object('vcp_filechooserbutton2').set_current_folder(os.path.expanduser('~/home/PC/FOLDER2')) def get_handlers(halcomp,builder,useropts): /* these row have a tab space that is an error .... so my error because retur is out of handlers .... I forgot the space order of python script ... */ ''' this function is called by gladevcp at import time (when this module is passed with '-u <modname>.py') return a list of object instances whose methods should be connected as callback handlers any method whose name does not begin with an underscore ('_') is a callback candidate the 'get_handlers' name is reserved - gladevcp expects it, so do not change ''' return [HandlerClass(halcomp,builder,useropts)]

[DISPLAY] GLADEVCP= -u hitcounter.py my_filechooser_button.test.ui /* <-- with 2 EMC_filechooserbutton inside similar to yours */ DISPLAY = axis CYCLE_TIME = 0.100 HELP_FILE = doc/help.txt

Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(LIB): /home/PC/linuxcnc-dev/lib/hallib/basic_sim.tcl Starting TASK program: milltask Starting DISPLAY program: axis Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -x 90177679 -u hitcounter.py bmeccanica_ultrasonic.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... Killing task linuxcncsvr, PID=31177 Killing task milltask, PID=31209 task: 660 cycles, min=0.000005, max=0.006313, avg=0.001064, 0 latency excursions (> 10x expected cycle time of 0.001000s) Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: setup_kins: cmd=loadrt trivkins Note: Using POSIX realtime note: MAXV max: 1.200 units/sec 72.000 units/min note: LJOG max: 1.200 units/sec 72.000 units/min note: LJOG default: 0.250 units/sec 15.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) Traceback (most recent call last): File "/home/PC/linuxcnc-dev/bin/gladevcp", line 312, in <module> main() File "/home/PC/linuxcnc-dev/bin/gladevcp", line 212, in main handlers = load_handlers(opts.usermod,halcomp,builder,opts.useropts) File "/home/PC/linuxcnc-dev/bin/gladevcp", line 113, in load_handlers mod = __import__(basename) File "./hitcounter.py", line 67 ''' IndentationError: expected an indented block <commandline>:0: waitpid failed gladevcp gladevcp <commandline>:0: gladevcp exited without becoming ready 31177 PID TTY STAT TIME COMMAND 31209 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components Note: Using POSIX realtime

Traceback (most recent call last): File "/home/PC/linuxcnc-dev/bin/gladevcp", line 312, in <module> main() File "/home/PC/linuxcnc-dev/bin/gladevcp", line 212, in main handlers = load_handlers(opts.usermod,halcomp,builder,opts.useropts) File "/home/PC/linuxcnc-dev/bin/gladevcp", line 113, in load_handlers mod = __import__(basename) File "./hitcounter.py", line 67 ''' IndentationError: expected an indented block

LINUXCNC - 2.8.0~pre1 Machine configuration directory is '/home/PC/linuxcnc-dev/configs/sim/axis/gladevcp' Machine configuration file is 'gladevcp_panel.ini' Starting LinuxCNC... Found file(LIB): /home/PC/linuxcnc-dev/lib/hallib/basic_sim.tcl setup_kins: cmd=loadrt trivkins Note: Using POSIX realtime note: MAXV max: 100.000 units/sec 6000.000 units/min note: LJOG max: 100.000 units/sec 6000.000 units/min note: LJOG default: 50.000 units/sec 3000.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) /home/PC/linuxcnc-dev/bin/gladevcp:298: GtkWarning: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 gtk.main() task: main loop took 0.010049 seconds /home/PC/linuxcnc-dev/bin/gladevcp:298: GtkWarning: GdkWindow 0x5000003 unexpectedly destroyed gtk.main() **** GLADE VCP ERROR: X Protocol Error: 3 Shutting down and cleaning up LinuxCNC... task: 17359 cycles, min=0.000005, max=0.010049, avg=0.001056, 1 latency excursions (> 10x expected cycle time of 0.001000s) Note: Using POSIX realtime

def on_window1_destroy_event(widget, data=None): gtk.main_quit() def on_notebook1_destroy(self,obj,data=None): self.ini.save_state(self)