Event paused and resume

4 years 10 months ago #229338 by wasausky

Event paused and resume was created by wasausky

Hi all what is the way to generate a pause and summary event of a program in glade i am using glade on axis How can I use these linuxcnc events?

linuxcnc.org/docs/html/gui/gladevcp.html..._with_status_changes

Please Log in to join the conversation.

4 years 10 months ago #229357 by cmorley

Replied by cmorley on topic Event paused and resume

try this (linuxcnc 2.8 -master is similar):

linuxcnc.org/docs/2.8/html/gui/GStat.html

Please Log in to join the conversation.

Time to create page: 0.070 seconds