Code:
[DISPLAY]
DISPLAY = axis
GLADEVCP = -H gvcp_call_list.hal gvcp-panel.ui
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
ARCDIVISION = 64
GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
MAX_FEED_OVERRIDE = 2
MIN_SPINDLE_OVERRIDE = .5
MAX_SPINDLE_OVERRIDE = 2
DEFAULT_LINEAR_VELOCITY =15.00
MIN_LINEAR_VELOCITY = 0
MAX_LINEAR_VELOCITY = 50.00
DEFAULT_ANGULAR_VELOCITY = 36.00
MIN_ANGULAR_VELOCITY = 0
MAX_ANGULAR_VELOCITY = 360.00
INTRGLADEVCP = -H gvcp_call_list.hal gvcp-panel.uiO_GRAPHIC = linuxcnc.gif
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/cnc/linuxcnc/nc_files
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm
Notice anything wrong there?
INTRGLADEVCP = -H gvcp_call_list.hal gvcp-panel.uiO_GRAPHIC = linuxcnc.gif
should be
INTRO_GRAPHIC = linuxcnc.gif
As for sizes, those are ditable in the gvcp-panel.ui file, example
<property name="width_request">100</property>
That means 100 pixels wide.
As for hal, pretty sure
halui.mdi-command-00
will do nothing or that command must have an entry probably in the ini file.
Sorry i can not help much, but i never used glade.
